Front Brake Bleeding and Flushing

We have some more shop day with Rado where now we teach you how to bleed and flush your front brake.
Click here when shopping at Rocky Mountain ATV/MC. This cost nothing extra and supports our channel.
www.rockymountainatvmc.com/?r...
Jay Clark/Dirt Bike TV has been around the Dirt Bike industry for thirty years and is always looking to learn and help others do so as well. Give a follow or drop an email if you have any questions or comments. Thanks for watching!
Instagram: @dirtbiketv1
Facebook: / dirt.bike.tv
KZbin: / dirtbiketv
Website: jayclarkent.com
Email: [e-mail]
MUSIC: bensound.com
Thanks for watching, don’t forget to share and subscribe.
#DIY #Husqvarna #KTM

[@WadeMade]

Thanks for this video. You guys have the best maintenance content. I really appreciate it!!!

[@kensmith3665]

I love all your content. Extremely valuable. thanks. Not sure if this info will be helpful but, Japanese bikes have Japanese Industrial Standard screws which are different than Phillips. Phillips are designed to cam out to prevent ham fisted manufacturing assemblers from over tightening fasteners. JIS can be tightened more than Philips and the proper screw driver to use on all Japanese motorcycles is JIS screwdrivers. It’s worth buying a set. You won’t be stripping out JIS screw like happens with a mismatched driver like Phillips style in a JIS screw.

[@joshuaferraro7010]

Great video, very informative

[@dirtrider7777]

Have you guys ever tried ACF-50 it is a amazing penetrate you can apply a thin coat to metals and it will not dry out like wd-40.

[@spencerclark2269]

Awesome vid!

[@rapaent]

Thank you for your awesome tutorial! I see that you manually bled as soon as you got done air bleeding. Do you pneumatic air / manually bleed each bleeder as you go in sequence? I went through and completely air bled my GL1800 a couple times. I followed up / finished by manually bleeding a couple times. Question; Are you manually bleeding at each bleeder right after air bleeding individually? In other words.... pneumatic air bleed > Manual bleed move onto the next bleeder in sequence > Repeat? If so, my thoughts are that your way would be better than my way instead of going through the entire system looking for any air left in the line. Thanks again. Great Job!! 👍

[@Jake_Hynds]

do you leave a zip tie on the break handle with the reservoir cap off overnight? is that what you said you were going to mention?

[@59plexi]

lay the bike on its side throttle up and you will be AMAZED what happens!

[@mixtips637]

Your rite just because its more expensive docent mean its better

[@patricktheriault2130]

I have a 2022 fc350 and the front brakes feels spongy and i can almost touch the bar. And the front wheel drags a bit like 1rurn then stops.any advice

[@dirtbiketv1]

okay - email me for some advice. Contact info in About tab.

[@NickW90]

What is the purpose of putting the zip tie on the brake lever overnight? I’ve seen people do that before

[@colinchilds]

Yeah seriously… I wanna know too

[@johnathankelly939]

Me too

[@mxbigd17]

It forces the piston all the way in in the caliper thus opening the caliper to release the air bubbles out of the into the atmosphere over night.

[@paulvanhout9695]

But the $25 bottles look cool🙂

[@chrisbilling]

How to do it without the fancy suckie thingy?

[@dirtbiketv1]

You struggle and do it well- I know from years of trying without - it can be done but I dont like to.

[@hudsonedwards87]

i disconnected my front brake on my ktm 85 to get my suspension and i got it installed back and now my front brakes don’t work, why do i do ?

[@dirtbiketv1]

Email Jay. Contact info in About tab.

[@xxMW2PRODUCTIONZxx]

Any advice for getting the fluid cap screws out when they are seized? As mentioned at the end mine are seized on

[@dirtbiketv1]

email me with pictures--

[@squid0g]

Try a small impact screw driver. Or any screwdriver that has a solid fit in the screw. Then hit the screwdriver with moderate force with a hammer while trying to turn it. Might take a while but seems to work well enough most of the time

[@xxMW2PRODUCTIONZxx]

@@squid0g sorted now but thanks 👍

[@defritzel]

I don't believe you will see any bubbles coming up through the master cylinder unless you are squeezing the brake lever.

[@jgrady7779]

You will if you’re pushing against the caliper and there’s air in the line.

[@hpatel5244]

Hey if I was to buy 4 t wrenches. What would you say is the 4 most common metric size t wrenches?

[@dirtbiketv1]

Email Jay with any questions - contact info in About tab.