Front Fascia/Bumper Removal Guide - 2010-2015 Camaro

[@justme2661]

As far as I can find best damn best 5th gen bumper removal video I have found yet ! 👍

[@michaelscott8267]

That harness on the right side is what you can use to plug in that connector to make the fog lights stay on with the headlights only for RS and SS models with RS package.

[@Mrnicguy00]

This saved me a bundle of time, ty. I need to replace both of my horns (recent purchase). I thought I had to remove the entire bumper cover to reach my objective. 4:45 was all I needed. Remover inner liner and there they are. Need to replace rotors and pads anyhow. It was neglected but found a good home. 2015 1SS 6spd, 73K miles.

[@mstrwil73]

You played with my emotions! I was waiting for the install (yes I read it was only removal). I was so into the video that I was hyped about what as going to be installed.

[@SusanaCarbajal-f5o]

What is Walter White doing there? lol

[@1loudzl1]

😂

[@isnowyazn]

@@1loudzl1Is that your Z28 in the profile picture or nah??

[@1loudzl1]

@@isnowyazn ma bois z/28 brotha I got a zl1

[@sgtyork9330]

Thanks guys. Very helpful. I need to remove and replace my right fender some day because of some punks who threw big rocks at my car late one night. I bought a fender and painted it. Just need to buff it out and install. My 2011 2SS Convertible has been through some stuff. Hail, rock throwing punks, rock to my windshield, and last week a broken tree limb. Still doesn't look too bad for the troubles it's had. Oh yeah, and my front bumper and chin spoiler replaced because a dork backed into me at the car wash.

[@sgtyork9330]

I drive mine everyday it's decent enough to drive. 83,000 miles popped up on my way home yesterday. I'd keep it in the garage but my 66 Chevelle and 71 Cuda are setting in there now. I need another garage or a bigger one. Too many toys.

[@cw2lido]

The video I’ve been waiting for!

[@kianfabian7867]

i know it's kind of randomly asking but do anybody know a good place to stream newly released tv shows online?

[@jasezayden6383]

@Kian Fabian lately I have been using FlixZone. You can find it on google :)

[@yorkie1792]

4:51 I thought your Dad was the actor in Breaking Bad for a second 😊

[@Lethalgarage]

He gets that all the time

[@yorkie1792]

​@@LethalgarageI love your channel. I am modifying my Camaro and your tips helped with front bumper removal.

[@picklechips1483]

Aww man that's a lot of work! Haha! Never gonna catch me pulling forward too far again. I pulled too far forward on a parking curb, it caught the lip of my front bumper just enough to dislocate it while I was reversing and now I have to remove and put it back in place.

[@0fficialt]

Oh my gosh this is my current situation😭👎🏽I need a whole new one though, because the owner before me broke the clips on the sides so it sticks out on the side.

[@picklechips1483]

@@0fficialt That sucks! Those stupid clips are so cheap though. The same thing happened to my rear bumper and the sides just stick out.

[@whipsmostwanted]

Thanks for the video. I'm thinking about getting a Camaro SS and changing the front bumper for a custom look.

[@TurboDodgeXVI]

If anyone does this and still cannot remove it. I'm working on a 2015 LT and there are no 7 mm holding the bumper to the fender. There is a clip there but for some reason no screw. However there IS a 10 mm right behind the reflector facing inwards that needs to be removed... For whatever reason. Tyvm for the video as well

[@ELpacoPro2.0]

Wait are you going to do a part two to the video On how the front bumper of the ZL1 5 GEN conversion looks like?

[@ballbreed3118]

Can I put the 2012 Camaro 2SS front bumper on my 2012 Camaro RS🤔

[@alexramirez7642]

Can you help me out please I’m doing on my car but I lost all the hardware you think you can give me the info on the bolt sizes and how many I need

[@sestren2503]

Every removal video I see doesn't show the extra 3 screws per side on the bottom of the bumper. I have a 2015 LT with RS package and there's 3 screws per side on the bottom along with the 2 frame bolts that need removal as well.

[@accessprogates1988]

You should make a vid on lifting the car and setting the stands.

[@bomoneyslots]

Hey I have a question I have a 2010 Camaro super sport with the regular headlights not the halos does the 2013 halos fit on my 2010 plug and play or do I have to rewire stuff

[@robertocarloslemus]

I need that front bumper for my 2012 Chevy 45th Edition, Are u selling that bumper?

[@troywinslow4756]

Do you have to jack it up and take the wheels off?

[@mr.friday5034]

How do i take out the little screws at the bottom in the bumper?

[@helenadufour668]

Hey i have a question if you would answer for me. I did this conversion on a 2015 RS. I got the DRLS that came with the kit. How would I connect it to make them work?? Of course it didn't come with instructions but its only a 2 wire plug and it came with a separate wire( im assuming its a ground) but the lights are sealed and all plastic. What am I doin wrong? please help me!! lol

[@lilblodz]

Is this the same on all camaros, mine is 2013 and has the fog lights, my insurance wants 500 deductible and the shop charges me 2100 and four days work. I saw it painted and online for 500, I would appreciate any advice thanks!!

[@edwinquijada1388]

Hi! What kit bumper front can I buy for jump my Camaro 2013 LT to 2017 or ZL1 , you can give me the kit for buying that can I use for this camaro ??

[@Lethalgarage]

I have no idea

[@lowlifewill8895]

Any chance you know the what the thread size is that bolt to the bumper

[@Lethalgarage]

I have no idea

[@FibKingTrading]

That top 10MM bolt? Tips on getting that bastard out? I don't have a flex line or small drill. Just a good ole socket set one with a swivel. Is it easier to remove the entire inside tire guard?

[@jdelatorUIUC]

What's the part number for the GM push clips?

[@michaelscott8267]

Nice 45th. I have a 2012 also.

[@stevenmyers2235]

Great video it helped me out a lot

[@thefinisher2464]

I can’t get the top 10mm on passenger side used a wrench drill don’t know how

[@thefinisher2464]

Medal is in the way

[@RaksNation]

Where can I buy the upper clips online for the bumper, the ones you said that were like $2 a pop

[@cactusjuice690]

Can you please come help me replace mine i really need hlep

[@daphneblake7889]

Everything was going great, until... I had to remove the front stock facia from my 2011 rs to install an under-mounted front plate bracket (law in my state) Because I could not get my drill underneath (too low and no jack) Everything came loose except one bolt. The top right facia to fender bolt behind the fender well. It seams the metal top-hat nut was spinning in the plastic! With no way to "hold" it I was screwed! So I got everything else loose and pry'ed the facia away from the fender just enough to insert a wood wedge. Then pushed the facia back. This leveled it away just enough to get a needle-nose vice grip around the nut. Hopefully the stretched plastic will return to shape over time. I got my plate bracket installed and did NOT reinstall that top bolt! FYI... there is one more 10mm bolt just behind the side marker lamps on each side that must be removed also (not mentioned)

[@reapersouls9269]

Thanks saves me alot of time

[@mohsen.m7273]

thanks

[@LineMUp321]

Sad that most of your 5th gen content is coming out AFTER I needed it but 100% thankful that you post basically everything Camaro.

[@turboheadcrab666]

Awesome quality of the video. Thank you!

[@robertpoudrette4483]

High quality video, Thanks!

[@alexescudero8262]

Great videos, was there any rivets that needed to be drilled out. My buddy said he had to drill out some rivets. I'm guessing he had damage before! Any information will be appreciated.

[@Lethalgarage]

None

[@alexescudero8262]

@@Lethalgarage thank you Sir

[@saeefan]

will the ZL1 bumper fit without mod. on the 6th gen SS

[@Lethalgarage]

No it will not. It is 1” wider

[@__blorenzo6439]

I got a SS bumper on my 2012 CAMARO car today but I can’t find the grills that go between the top and bottom part of the bumper. Where can I order them from?

[@Lethalgarage]

EBay these days, GM discontinued them

[@kevin-qc7zv]

I love my 5th gen Camaro at one point I wanted to trade in it but na I'm keeping it

[@robintaylor1490]

Perfect timing I was just about to install a tow hook on my 13 ZL1 ... lol

[@zl1johntv278]

robin taylor hi bro i have 2010 camaro 2015 bumper is fit to my 2010??? Or not?

[@robintaylor1490]

@@zl1johntv278 I'm pretty sure it would fit. But to make sure just call an auto body shop or a gm dealership to be on the safe side. Good luck.

[@mrmusclecarsuspect5362]

Nice video bro 2nd comment and 2nd like on the video keep up the good work

[@jessiegarcia1734]

Perfect how to, thanks!!!

[@zl1johntv278]

Hi bro I have question 2015 zl1 bumper is fit to 2010 ?

[@urielgomez3701]

Does is fit?

[@dominickirkwood]

I love it my bro keep up work and love video 💯💯💯💯👍

[@campeck7793]

Im a new subscriber and looking rejoin the Camaro family. Just sold my 2010 Cobalt SS turbo today! Is it possible to find a Camaro SS 2010 or newer with less than 40k miles? I have 18K to play with. Keep up the good work man!

[@michaelsieber6601]

I'm assuming you found a car buy sounds doable probably a 5th gen Corvette is a better buy

[@Lethalgarage]

If you like Vettes

[@iamkingace7]

Thank you

[@isnowyazn]

Walter White is working on cars now???

[@feMARIE614]

Hey do you know where I can buy all clips? A link

[@Lethalgarage]

Your local dealership

[@norbertovega8543]

thanks for your help

[@EAGLEHORDER]

3:19 DUDE YOU RUINED THE BOLT HOLE ON THE BUMPER! ELEPHANT HANDED STUFF DOESNT GO WELL LOL

[@Lethalgarage]

It’s fine

[@BlueThunderO7]

So after the front bumper is off and you say wanted to replace the upper grille with a new upper grille like for example: the heritage grille or the 2012 ZL1 upper grille does the stock grille just slide right off or are there screws in the bumper holding the grille in place?

[@Lethalgarage]

3 metal clips and about 8 plastic flex clips molded tot he bumper. Takes all of 2 minutes to pull the grill off. My next video shows the ZL1 conversion and how to pull that all apart.

[@BlueThunderO7]

@@Lethalgarage Awesome! :) 👍👍

[@dannyoliveira4787]

Great video thanks. 👍🏻💯👍🏻💯💯💯

[@chrise4191]

Your dad looks like Walter from Breaking Bad 💀, good info also

[@thomashalikas4812]

TELL YOUR DAD I LOVE HIS NEW CAR ! , ....... I LOVE GEN 5'S

[@thomashalikas4812]

and you're a good mechanic ! ............ hope you guys has a great memorial day !

[@BlueThunderO7]

Me too :) :) :)

[@ernestkaye9261]

thank you very much thought it would be worse than that

[@brexxebender1204]

So you got the car Jacked up , wheels off and then the bumper etc etc in 15 mins???? 🤔

[@Lethalgarage]

All of it

[@Bemacmaya]

Your dad looks like walter white hahaha (breaking bad)

[@bradstephens306]

Thanks man

[@Jeikune]

can you put a 2014-15 bumper on a 10-13 lol

[@Lethalgarage]

Technically yes, but you would need new headlights as well.

[@Jeikune]

sounds like a project!

[@fbanda20]

I see a lot of ZL1 imposters in the future. Just like now a days it’s so hard to tell a real 4th gen Trans Am WS6 from a regular T/A.

[@juansantos1614]

Easy !!!

[@the1theonly841]

Holy crap that was literally Walter white!!!

[@danrez42]

Harbor freight buy a whole package for 1520 bucks

[@InfinitePCGaming]

Heisenberg sighting....

[@chrisqzone]

Am I tripping or does ur dad look like walter white from breaking bad lol?

[@Lethalgarage]

He gets that a lot ;)

[@chrisqzone]

@@Lethalgarage thats a cool dad you have to buy him walter whites hat

[@Serranomma646]

Drill died cuz it's not Milwaukee

[@chadnesson6008]

Yup

[@michaelscott8267]

Smfh changing the headlights lol

[@7unalions2]

Thanks man