Front Turning, Back Turning, Profiling, and Face Turning with ONE SINGLE TOOL!

AddMultiTurn
tungaloy.com/p...
■Standard cutting conditions
Grade = T9215
●Medium to heavy cutting (TM breaker)
Vc = 150 - 400 m/min
f = 0.2 - 0.6 mm/rev (Front turning) / 0.4 - 1.2 mm/rev (Back turning)
ap = 0.5 - 2.5 mm
●Finishing(TSF breaker)
Vc = 150 - 400 m/min
f = 0.08 - 0.4 mm/rev (Front turning) / 0.2 - 1.2 mm/rev (Back turning)
ap = 0.2 - 1.5 mm
■Work material：C45
#shorts
#cnc
#machine
#machining
#tools
#ev

[@alphaindustries5775]

Honestly incredible that such a small object can cut through solid steel like butter. Amazing!

[@TungaloyCorporation]

Thank you for the best compliment!

[@arnelconde6587]

Is that available in market

[@DieselRamcharger]

those guys really know their stuff....to make it look so effortless.

[@donniev8181]

I find it absolutely amazing, unbelievable almost! The way these inserts are manufactured is also fascinating!

[@doncarmack5132]

@@TungaloyCorporationwhat do you use to make the drill bits and what are they made out of ?

[@ГригорийКалашников-щ9щ]

Этот резец выглядит как инопланетная деталь на фоне остальных резцов. Это просто великолепный инструмент.

[@СтепановЕвгений-п7г]

ЧТО ЗА МАТЕРИАЛ ?

[@HachipuriKebab]

​@@СтепановЕвгений-п7г Кобальтовый Титан !

[@Sash00MustKill]

​@@СтепановЕвгений-п7г, судя по названию канала это сплав вольфрама. Мб карбид вольфрама.

[@jlskee]

​@@СтепановЕвгений-п7гадамантий

[@NikitaB1177]

​@@СтепановЕвгений-п7г, скорее всего, карбид вольфрама. Возможно, нитрид титана.

[@jesusmejia1334]

The intricacy pattern on the bit is what makes it so cool! Also it’s very thick!!

[@TungaloyCorporation]

Thank you for the best compliment!

[@19LG99]

what exactly is the purpose of those patterns? maybe it has something to do with breaking the chip?

[@TungaloyCorporation]

■Standard cutting conditions Grade = T9215 ●Medium to heavy cutting (TM breaker) Vc = 150 - 400 m/min f = 0.2 - 0.6 mm/rev (Front turning) / 0.4 - 1.2 mm/rev (Back turning) ap = 0.5 - 2.5 mm ●Finishing(TSF breaker) Vc = 150 - 400 m/min f = 0.08 - 0.4 mm/rev (Front turning) / 0.2 - 1.2 mm/rev (Back turning) ap = 0.2 - 1.5 mm ■Work material：C45

[@sergiovicente6533]

Boa noite traduz qual e a marca e onde posso achar este imserno estou no Brasil se vc tiver o link desta imserno eu agradeço

[@eduardoalves-lb6pf]

​@@sergiovicente6533 Procura Tungaloy NTK do Brasil.

[@sergiovicente6533]

@@eduardoalves-lb6pf valeu muito obrigado pela atenção 👍💪

[@Dear-John..]

I always thought that cutting forces should be transmitted into the tool holder...that back cutting seems to reverse that trend. And of course its still the same single point that produces the required dia..

[@TungaloyCorporation]

Obrigado pelo seu comentário. Entre em contato conosco abaixo! Avd. Independencia N4158 Residencial Flora, 13280-000 Vinhedo, São Paulo, Brasil Phone: [phone]

[@yujinY470]

旋盤歴長かったけど、ここ10年は設計やってました。 近い内にNC旋盤工に復帰します。機械の進化もそうですが、チップの進化もすごいですね。タンガロイのSAブレーカーのT6030チップでSUSをゴリゴリ加工してたのが懐かしいです。

[@TungaloyCorporation]

コメントありがとうございます！ 復帰されるんですね！ 10年で、タンガロイがどれだけ成長できたか是非見てください！

[@yujinY470]

月曜日に早速商社に連絡してカタログもらいます。 福島県在住なので、以前はいわきの工場に何度か行かせてもらいました😄

[@TungaloyCorporation]

同じ福島だったんですね！ 工場にも来て頂いてありがとうございます！また是非来てください！ 何かお困りでしたら、遠慮なくご連絡をお願い致します。

[@weldmaster80]

That's not just a carbide insert that's a piece of art

[@TungaloyCorporation]

Thank you for watching the video!

[@janzweitweg2927]

yep. stolen art from sandvik😅

[@al.march.7457]

​​@@janzweitweg2927 Hi,tell me what "sandveek means?

[@РусланЛапшев-н2э]

@@al.march.7457SANDVIK Coromant

[@tupetsi430]

​@@al.march.7457 Sandvik is a heavy industry manufacturer.

[@hdhashidume5850]

面取りを瞬時のやるのスゴすぎ やっぱ自動化すげぇ

[@TungaloyCorporation]

コメントありがとうございます！ そう言って頂けますと大変嬉しいです！

[@jessehoeper2674]

Those tooling pieces are just as much art as anything else👍🤝

[@TungaloyCorporation]

Thank you so much for your compliments! It means a lot to us to hear you say that!

[@billjohnson7968]

You pay extra for the pretty ones 😮

[@consciouslasagne354]

That is the hardest Doritos ive ever seen

[@TungaloyCorporation]

Thank you for your interest! Are you a machinist?

[@consciouslasagne354]

@@TungaloyCorporation I have some experience doing machining projects but I'm still doing my degree currently.

[@Україна-ц7э]

How did the Dorito not shatter?​@@TungaloyCorporation

[@Україна-ц7э]

​@@consciouslasagne354same here

[@backho12]

Who knew that Dorito’s were multi purpose?

[@よしかわみきお]

毎回画像を拝見😂切削能力の物凄さ❗感動超越して😅唖然としています‼️素晴らしい技術開発カ最高ですね‼️

[@TungaloyCorporation]

いつも動画をご覧頂きありがとうございます！ そう言って頂けますと嬉しいです！ 皆様に喜んで頂けるよう、より精進致します！

[@coreydtyden474]

Extremely durable and precise!

[@TungaloyCorporation]

Thank you for liking it! It can be used depending on the application, such as front turning for strong parts and back turning for weak parts!

[@TylerBrigham]

This is a blatant copy of Prime Turning... Im cool with that, but is it compatible with prime holders or did you make it just different enough to not work?

[@TungaloyCorporation]

Thank you for your comment. Not compatible.

[@cameroncarr3717]

The performance is nowhere near CoroTurn Prime and they are not much cheaper either.

[@_FJB_]

I want so badly to work someplace like this. I could watch this 20hrs a day.

[@TungaloyCorporation]

Thank you for your interest!

[@Alexeo699]

@@TungaloyCorporation сколько стоит такая пластина и где ее можно купить?

[@growleym504]

So this is a TNMP331? What does the "P" designate? I wouldn't mind having a few of those. Just a hobbyist here, Chinese benchtop machinery.

[@クロネコ-y6d]

旋盤は見ていて気持ちええね

[@TungaloyCorporation]

気に入っていただきありがとうございます！

[@GxZrG]

That Machine does an immaculate job ngl 🔥

[@ФедяПавлов-ю1о]

станок с ЧПУ обычный. с напайкой многогранной и заточенной равномерно.

[@TungaloyCorporation]

Thank you for your interest!

[@movingtargetsmobileaxethrowing]

Cutting some 52100 in there? What speeds and feeds are you running that at?

[@Max2coolmayur]

What kind of metal is that? Which is cutting the whole thing

[@TungaloyCorporation]

The material of the insert is made of cemented carbide, which is the second hardest material after diamond!

[@tejaswikumaryus6532]

Thanks u for uploading this short . It helps me about carbides insert as i am study metal cutting

[@TungaloyCorporation]

Thank you for liking it! There are many videos, so please take a look!

[@quangquiu5756]

What software do you use to programing?.. Thank you so much.

[@peterCheater]

I love your watching demos. I use mainly Ingersoll 😊 (I know you guys share tools too, being from same group) Keep making more!

[@TungaloyCorporation]

Thank you for always watching the video! We will do my best to provide more useful videos for everyone!

[@botalex4845]

In every one of these videos, they always take out a completely fresh thing. Lemme see you rotate one of them.

[@TungaloyCorporation]

Thank you for your interest!

[@xiaoer-nq3pk]

Whats this material？ By the way， this little thing looks pretty cool

[@TungaloyCorporation]

Thank you for your interest! The material of the insert is made of cemented carbide, which is the second hardest material after diamond!

[@al.mustafawal.murtazaengin]

Nice working tools ❤

[@TungaloyCorporation]

Thank you for the best compliment!

[@chub22g24]

6 index for an insert like that is pretty awesome

[@chub22g24]

Well just considering front turning... still cool man

[@TungaloyCorporation]

Thank you for liking it! Please try it! It can be used depending on the application, such as front turning for strong parts and back turning for weak parts!

[@mahdirezaei3366]

Holy shit, That's a masterpiece. It cuts the metal as butter

[@TungaloyCorporation]

Thank you for your interest!

[@Legless_Orphan]

Never used that insert before, kinda cool to see how you can use it.

[@TungaloyCorporation]

We think most people try various methods to improve the efficiency of external rough machining and achieve minimal waste. Still, I think this is the perfect tool for those who want to improve efficiency and increase productivity. Although it is still rough machining, the faster you can cut the lever, the better.

[@ぱんだなんだね]

NCオペレーターです。いつも楽しく拝見しています。 今度、 このチップのTMブレーカーR0.8でS45Cφ42→φ17（長手30ミリ）に粗挽きします。経済性・耐久性に期待しているのですが、 ・前挽きでap2.5・f0.3（既存の挽き方）で挽くか後挽きでパス回数を増やすかどっちがいいのでしょうか？ ・後挽きでap1.5程度のとき送りはいくつが切り粉の処理・耐久性で適正でしょうか。バー材のため回転はs2500くらいが限度です。

[@TungaloyCorporation]

いつもご覧頂きありがとうございます！ また弊社製品をご使用頂けるとのこと、大変嬉しく思います。 後挽き加工で ap = 1.5 mmの送り推奨はf ＝ 0.6 ~ 0.8 mm/revでございます。 また、後挽き、前挽きを繰り返すことで、非切削時間の低減、サイクルタイム短縮と、前挽きと後挽き両方の切れ刃を使用することで摩耗を分散し寿命改善が期待できます！ ワークや機械の剛性を加味しながら、最初は低めの送りから条件を整えて頂ければ幸いです。 この工具はとても頑張り屋さんなので、何卒よろしくお願いいたします！ ※工具侵入はf = 0.2 mm/rev上限 or ロールイン 。後挽き加工は、有効切れ刃長さが長い加工であり、前挽き加工と比較してチャックから引き抜く方向に 切削抵抗がかかる加工となりますので、芯押しを使用した環境での加工を推奨します。

[@ぱんだなんだね]

@@TungaloyCorporation 詳細かつ迅速なご返信ありがとうございます！ 前挽き、後挽き併用で寿命改善かなり期待できそうですね…！ いただいたコメントを元にテストカットしてみようと思います。

[@TungaloyCorporation]

@@ぱんだなんだね この製品は使い方によって外径旋削の能率を向上させることができると思っております。 例ですが、剛性が高い部分は後挽き、剛性が低い部分は前挽きと変更するだけでも大きく変わります！ 何かございましたら、我々にお任せ下さい。

[@DazePhase]

Beautiful and clean cutting. 💯

[@TungaloyCorporation]

Thank you for your interest!

[@chrisfisichella7665]

Really good design. Nice job.

[@TungaloyCorporation]

Thank you for your good comment!

[@chrisfisichella7665]

@@TungaloyCorporation no problem. Keep up the great work. I had no idea you did all these things. I just see an insert on a catalog and move on. These videos add depth.

[@범륭]

저 바이트 팁은 오랫동안 사용할 수 있을 겁니다. 돌려 끼우면 수명이 3배.

[@daddddddy]

Please tell me the name of this tool😊

[@TungaloyCorporation]

AddMultiTurn tungaloy.com/product/turning/addmultiturn/

[@MrMarkpark]

I can’t believe it back cuts a rough non-concentric surface with a huge face with zero chatter.

[@TungaloyCorporation]

Thank you for liking it! It has many corners and is the perfect tool for rough machining!

[@АлександрБекарев-у5щ]

Выглядит красиво, но супер сомнительно, что за материал? (Наладчик станков с ЧПУ).

[@TungaloyCorporation]

Материал вставки изготовлен из цементированного карбида, который является вторым по твердости материалом после алмаза!

[@VoidMySoul]

Do you wear gloves when inserting the metals as well?

[@TungaloyCorporation]

Thank you for your comment! Machine operators always wear gloves when working.

[@user-ts6yi8rn9y]

I'd like to see how the cutter is made! I believe it would have to be cast or forged. I've never seen anything about how to make these tools

[@TungaloyCorporation]

Here is some footage! kzbin.info/www/bejne/n2TGlmCfr6dqpZY

[@CompellingThoughts]

which metal has been used to make this tool ?

[@TungaloyCorporation]

Thank you for your interest! The material of the insert is made of cemented carbide, which is the second hardest material after diamond!

[@ВячеславЯшин-ч7ж]

Холостых проходов режущего инструмента нет. Инструмент идеальный. 60 лет назад был токарем. Эпоха другая.

[@TungaloyCorporation]

Благодарим вас за проявленный интерес

[@dokenplus]

何これスゴイ！ タンガロイさんの製品？ ワクワクしますね！

[@TungaloyCorporation]

コメントありがとうございます！ そう言って頂けますと嬉しいです！ この製品は、外径、端面、倣い、高送りの後挽き加工が出来、 用途によって加工を選択できる頑張り屋さんです！

[@dtgomez]

Lol that looks so cool. Maybe have to try at work.

[@TungaloyCorporation]

I think that it is quite difficult to improve the efficiency of outer diameter processing, so please try it at this opportunity! Economical with 6 corners, Depending on the application, if you can use back turning and front turning, the efficiency will surely increase!

[@ricardogarcia5934]

One word: Perfection!

[@TungaloyCorporation]

Thank you for liking it!

[@baatarishero]

If these things can cut steel like that, what made those inscriptions on it in the first place?

[@D10ONLY]

what is the name of this tool

[@TungaloyCorporation]

Thank you for your interest! This product is AddMultiTurn. Front Turning, Back Turning, Profiling, and Face Turning with ONE SINGLE TOOL tungaloy.com/product/turning/addmultiturn/

[@annacalise8336]

Man I just love looking at these up close, they're just so cool looking, I especially like seeing all the different chip breaking designs!!

[@TungaloyCorporation]

Thank you for the best compliment!

[@kymtorr1808]

No coolant needed ?

[@TungaloyCorporation]

This time we did it dry so that you can see the processing and the product carefully! We recommend using cutting oil!

[@donniev8181]

How long does a typical insert last?

[@TungaloyCorporation]

AddMultiTurn insert provided triple tool life when fed at the same feed rate as ISO insert. Double the feed rate with AddMultiTurn compared with ISO insert without compromising tool life.

[@rycobol]

What is this tablet made of? Titanium?

[@seansilvis3824]

Would love to try this. Looks like a great insert

[@TungaloyCorporation]

Thank you for liking it! Please try it! It can be used depending on the application, such as front turning for strong parts and back turning for weak parts!

[@sobirdjuraev4375]

Отличная работа.инструмент супер

[@TungaloyCorporation]

Благодарим вас за проявленный интерес

[@FranciscoRivas-y8f]

My question is how many parts do you get out every side?

[@TungaloyCorporation]

Thank you for your comment! What does one side mean?

[@FranciscoRivas-y8f]

@@TungaloyCorporation how many parts are you making for each insert.

[@TungaloyCorporation]

@@FranciscoRivas-y8f Thank yo for your reply. By back turning, the cutting speed can be significantly reduced even under the same conditions as conventional ISO tools. Achieving long life! Even if the feed rate is doubled (machining efficiency is doubled), Achieves tool life equivalent to ISO tools

[@FranciscoRivas-y8f]

@@TungaloyCorporation per tip of the insert. How many parts per side can be cut before finally changing insert.

[@TungaloyCorporation]

@@FranciscoRivas-y8f It depends on the processing conditions, but we also have cutting examples, so please take a look at this document. tungaloy.com/product/turning/addmultiturn/

[@thefinalcalamity3908]

Not hating on the design but is their actually a reason to make the tool look like that cause to me it seems it’s suppose to make it look pleasing

[@mattdpainter531]

This seems mostly artistic but the raised design is there to make the metal chip apart, instead of having a long, sharp strip hanging off

[@TungaloyCorporation]

Various machining operations depending on the application, external turning , front turning, face turning, copying and buck turning with high feed rates.

[@davidchilds3166]

What type of material is being machined?

[@oooszh]

Из чего они сделаны? И как их производят?

[@dinsaga8419]

Глаз радуется красота

[@TungaloyCorporation]

Благодарим вас за проявленный интерес

[@luminewife2743]

nostalgia masa PKL dulu, kerja di pabrik motor, jadi operator mesin buat cakram rem.

[@joemodesto1808]

Insane! Great stuff!

[@TungaloyCorporation]

Thank you for liking it!

[@TheBerel1]

🕴🏽the machining “moonwalk”🚀

[@TungaloyCorporation]

Thank you for liking it!

[@Bloodeagle1984]

Insert actually popped at the end

[@TungaloyCorporation]

Thank you for your comment!

[@Optical_Nerd]

Very satisfying 💓💓💓🥰🥰🥰

[@TungaloyCorporation]

Thank you for the best compliment!

[@Michelzin..l..]

Poderiam mostrar o processo de fabricação dessas brocas...

[@TungaloyCorporation]

É fabricado com essa imagem! kzbin.infoQomCagD6OKI

[@SlowSTEN]

I need one of them just to set on my desk, those things are a work of art holy

[@markmunish5310]

Is this Titanium?

[@Stacystoner1995]

Its carbide

[@TungaloyCorporation]

The material of the insert is made of cemented carbide, which is the second hardest material after diamond!

[@jamesdspangler]

Link to buy?

[@flippopotamuss]

I wonder what those tips cost

[@TungaloyCorporation]

Thank you for your comment!

[@metrocomlee4289]

Wow, 초경의 절삭력...굿👍

[@TungaloyCorporation]

귀하의 의견에 감사드립니다!

[@ricardini7338]

con recubrimiento de carbonitruro?

[@TungaloyCorporation]

¡Sí, inserciones recubiertas! ¡Tenemos muchos tipos de materiales!

[@シユウ-u2g]

鋳鉄でも使用できますでしょうか？

[@TungaloyCorporation]

コメントありがとうございます！ 一部、鋳鉄にもご使用頂けます！ T9225,T9215という材種でございます。 tungaloy.com/jp/product/turning/addmultiturn/

[@emanoelbarreiros]

How long do these blades last?

[@epicboy4055]

which metal it made ?

[@TungaloyCorporation]

This insert is made of cemented carbide, which is said to be the second hardest material after diamond.

[@epicboy4055]

@@TungaloyCorporation ohh 😯 I thought it's tungsten But cool 🔥

[@Nossdreal]

Only dry cut?

[@TungaloyCorporation]

This time we did it dry so that you can see the processing and the product carefully! We recommend using cutting oil!

[@amazingvideo07]

Cutting Tool name ??

[@TungaloyCorporation]

Thank you for your comment! Product name is AddMultiTurn. tungaloy.com/product/turning/addmultiturn/

[@rodicaflorariu753]

I first thought it was a metal derito but then thought it was a fijit spiner

[@TungaloyCorporation]

Thank you for your comment! They certainly look alike!

[@adibrindea]

Workpiece must be clamped really good on the lathe chuck. For back turning the tool might take off the workpiece if is not clamped Ok.

[@TungaloyCorporation]

Thank you for your comment! Are you machinist?

[@adibrindea]

@@TungaloyCorporation i sell cutting tools :)

[@SuperstarComponentsLTD]

Your Chuck must be weak😂 maybe try greasing it😅

[@gabbermaikel]

on a cnc you should ALLWAYS have your chuck setup properly. You dont want to shoot your part out of the machine at 3000rpm+ either... And imho insert tooling like this is not worth it on a manual machine. Normal insert tooling is fine, but the special inserts wich tend to be more expensive are just not worth it. I mean what are you going to do on a manual lathe with this?

[@josephlamontagne7294]

Ok but Coolant?

[@TungaloyCorporation]

This time we did it dry so that you can see the processing and the product carefully! We recommend using cutting oil!

[@쏭쏭-b2t]

It's beautiful.

[@TungaloyCorporation]

Thank you for liking it!

[@sumantripura8770]

Mention the blade name

[@TungaloyCorporation]

Thanks comment! This is AddMultiTurn!

[@barbarahellen100]

08?

[@JEETSINGH-gx8qs]

What's name of this insert ???

[@TungaloyCorporation]

AddMultiTurn! Since various machining can be performed, tools can be consolidated and the tool change time can be shortened! In addition, since post-milling can be performed with high feed, machining efficiency is also improved!

[@Zeddem]

I've never seen a machine like this it's very cool, I wonder what the cutting bit is made of to be able to peel metal like that

[@TDIMAXDIESEL]

Love the TNMP331 !!

[@TungaloyCorporation]

Thank you for your comment!

[@kaig.-s.1040]

It's beautiful

[@TungaloyCorporation]

Thank you for liking it!

[@jayppop3333]

You can bore with it too i do sandvik prime turning

[@TungaloyCorporation]

Thank you for your comment.

[@sebastianpereyro1]

Vibranium?

[@TungaloyCorporation]

Thank you for your interest! Real metal!

[@infinityunbox7261]

Where are you from

[@TungaloyCorporation]

We are Tungaloy in Japan!

[@shahzaibmughal516]

How can I buy it?

[@TungaloyCorporation]

Thank you for liking it! You can purchase it at the online shop! tungaloy.com/onlineshop/ Product name : AddMultiTurn

[@thenature5134]

Is available 25 degree 6 corners 0.4 inserts

[@dgpreston5593]

Thing of beauty 😊

[@TungaloyCorporation]

Thank you for the best compliment!

[@husanboyteshaboyev9611]

Is this real speed?

[@kerryking7202]

UNA BELLEZA!!!

[@TungaloyCorporation]

Obrigado por gostar! Com uma bela inserção, você pode afiá-lo!

[@FarmerKen355]

That is a bunch of bad assery right there

[@CraigLandsberg-lk1ep]

Gotta get me one of those 😀

[@TungaloyCorporation]

Thank you for liking it!

[@CraigLandsberg-lk1ep]

@@TungaloyCorporation really

[@_FJB_]

Beautiful!

[@TungaloyCorporation]

Thank you for the best compliment!

[@tonycerpa8390]

Beautiful

[@TungaloyCorporation]

Thank you for your interest!

[@harischandradevloperorgani7833]

What is this metal name

[@TungaloyCorporation]

Thank you for your comment! Work material is C45!

[@boban0121]

Ни видно же что это инопланетные технологии ,резец прямо из фильма пятый элемент!)

[@TungaloyCorporation]

Спасибо за ваш комментарий

[@MentesEnInercia]

Amazing!!

[@TungaloyCorporation]

Thank you for the best compliment!

[@fernandocruz8361]

Excelente calidad 😮😮😮❤

[@TungaloyCorporation]

Thank you for liking it!

[@kulbeersingh4316]

Insert name please. .....

[@TungaloyCorporation]

Insert name is AddMultiTurn! tungaloy.com/product/turning/addmultiturn/

[@adam207321]

holy crap thats one angry insert

[@TungaloyCorporation]

Thank you for your comment!

[@slimblue_zp]

У резака такая интересная форма, его случайно не присылают с других планет😊?