Frsky to Dragon Link relay

[@JR-kk6ce]

Clear and to the point!

[@Joneszee1969]

Thanks for the quick response and info

[@Iconoclast55]

Brilliant .......exceptionally clever

[@solmag8076]

very nice video. Can this be done with TBS crossfire?

[@mkolesnik]

Hi RCDC, just curious how is your latency on this relay? i tried 2 different frsky RXes (X8R and jumper R1-D16) and not to happy with relay and "glitching" of plane controls (servos). I am connecting via SBUS - these days DL V3 accepts SBUS on input1

[@austntexan]

Is it now possible to do a straight SBUS relay, instead of CPPM?

[@dronepilot1333]

I don't have a dragon link, but R9M, L9R, R9 slim+, QX7. Can I make do with these?

[@Joneszee1969]

Great video, thanks. As far as the wires go coming from your Dragon like what channel do you plug into on your receiver? Or do you just plug in the same for SBus just using ppm?

[@rcdc5762]

Cheers, yes you just plug into the FRsky receiver as if you were plugging into a PPM flight controller. I think some recivers need a jumper on them to make them run in PPM mode. the Dragon Link just needs a normal PPM signal from the receiver the same as any mini quad flight controller. let me know if you need any more info.

[@i-am-that-what-i-am]

Have you been able to pass telemetry - received back to the Dragonlink tx from the aircraft, back to the Frsky receiver smartport, so that it can be seen on the QX7 ?

[@rcdc5762]

Sorry I never tryed

[@SKT260873]

Good stuff mate. Sub'd.

[@rcdc5762]

cheers dude. just watching some of your vids now, sweet action there

[@SKT260873]

I'm pretty confident I'll get this running on my EZUHF rig but do you know of peeps having success with this setup using EZUHF? Although I'm convinced any FrSky rc rx with PPM abaility would cut it...I'm just gonna grab the X4R that you've used hey. Save any headaches.

[@rcdc5762]

dont know anyone that has done it with EZUHF yet but know a few that are about to try. it will work for sure and i think if you have a Frsky reciver that will do PPM just use that. its so handy to have. I know it works to at least 21km out on the low dragonlink power setting (200mw) and still had 30RSSI. i dont think it would have got that far if it was mounted on my transmitter.

[@myrccomedy3368]

I can't get this to work on my Taranis, DL v2 & X8r.... ANY suggestions? X8r & DL binds just fine to Taranis, but DL receiver has no signals or movement from servos?

[@rcdc5762]

if you plug your DL into the taranis directly does it work?. if so then might be that the x8r is not putting out PPM or SBUS. check that and check that your DL is set for what your going to set the X8R to e.g. SUBS or PPM. let me know how you go dude

[@myrccomedy3368]

I have the DL V2 so what I needed was a SUBS to CPPM Converter. Thanks!