Fuel filter and Fuel pump service. BMW R1150GS.

[@motherduckGSA]

Brilliant 🤣 Good vid Fyi Fuel filter on first Then very thin smear of rubber grease on pump housing nozzle and the filter nozzle and the u tube pops in place toot sweet 🤩 Well done🍺

[@gapexx]

Thank you!! I am just wrestling with my 1150 tank as I need to strip it for painting. Very much appreciated.

[@the_mad_leprechaun]

Ah you are welcome buddy. I make videos, I put them out there for all to see. Some think my videos are funny, (a joke) it's nice to know that someone is looking and finding some help from them! Good luck with the paint job! 🎨

[@gapexx]

@@the_mad_leprechaun Oh yes, very entertaining :D I would send you a glove or two but I think I am down on the pack myself🙃

[@the_mad_leprechaun]

@@gapexx ha ha ha 😂 my channel sponsor bought me some! Aka my wife!!

[@Armandinho8]

Nice video... thanks for sharing the knowledge.👍

[@the_mad_leprechaun]

You are welcome! Glad you enjoyed! Appreciate it! 🏍💨💨

[@toastymuncher]

Hi, I bought the spare pump from you. Thanks for the vid, very useful indeed.

[@the_mad_leprechaun]

Glad I could help! 😁🫡

[@brianharper9798]

Excellent, and I'm sure my neighbor's were just as thrilled as yours as I set off for work at 6:30 this morning.

[@the_mad_leprechaun]

Ha ha ha well done! I know when I take any of my bikes out at 4 in the morning it hard to be quite! Take are Brian!

[@archontismichailidis2614]

Bravo very good job.

[@the_mad_leprechaun]

Thanks very much! Glad you enjoyed! Happy New year! 😁 👍

[@ChrisyC567]

Excellent vid murt, I enjoyed that one... 👍 More Tasks please... Thats a very funny clip at the end too mate.. 🤣

[@the_mad_leprechaun]

I shall do my best! Thanks mate!

[@MrJamiedineen]

Great video. about to reassemble my tank and my clymer manual didnt have the tip about the flat edge of the mounting flange. Does it matter which way the interior vent pipes are hooked up? Also wasnt careful enough when disconnecting my fuel lines and didnt mark which one goes where...is there way to know which way the fuel limes connect if you've made this mistake?

[@the_mad_leprechaun]

Thank you very much James. Glad my little video was able to help you! Not sure about the fuel lines. It’s been a while and I don’t actually own an 1150 anymore. 😂 Sorry. Safe travels, good luck with your project! Murt 🏍️💨💨

[@chrisscanlan7703]

Well done on the gloves.

[@the_mad_leprechaun]

I am out of gloves!!! 😆

[@mevagisseymedic]

Hi, Where did Chad get that adapter from for draining the tank

[@the_mad_leprechaun]

From memory it was something he put together himself. It really did make life easier when working on the fuel tank.

[@ssdwired3163]

Thank you.

[@the_mad_leprechaun]

You are welcome! Hope it helped! 😁👍🏍💨💨

[@davidgreen424]

The U tube would be pressurised from the fuel pump so I don't see how it would deform inwards. Good video still.

[@chassisom8943]

Is that a car tire on the rear?

[@the_mad_leprechaun]

Hello. Yes it’s a rear tire from a car. The wheel was specifically made for the rear of the sidecar. Centre is from a BMW R1150gs and the rim is from a car. Laced together with spokes, and finished off with a car tire. Murt 😁👍

[@bribraybrai]

Did you actually have trouble with the bike? Or did you just decide to change it?

[@the_mad_leprechaun]

No trouble with the bike. It was something that I was advised to do because of the age of the bike. Preventative measures!

[@bribraybrai]

Thanks for the reply

[@mvdeano]

Ruver glubs?? :)

[@the_mad_leprechaun]

Rubber gloves 🧤! Yes 😁 👍

[@kilakila992kilakila2]

You are using a green Diesel can to drain petrol and that is why your tank is not emptying. Get a red can.🤣🤣

[@the_mad_leprechaun]

It's green can for petrol in the UK! Black for diesel! 🏍💨💨

[@motherduckGSA]

Brilliant 🤣 Good vid Fyi Fuel filter on first Then very thin smear of rubber grease on pump housing nozzle and the filter nozzle anc the u tube pops in place toot sweet 🤩 Well done 🍺🍺

[@the_mad_leprechaun]

Where did you get the pipes for draining the fuel tank?