Fuel filter replacement honda rancher

[@AllAmericanDreamChaser]

Thank you for adding the part numbers into this video. Great job! 👍

[@grsilcott1]

I have an Identical unit with the exact same issues, you had all the part numbers and did all the homework I just had to order it all. Appreciate the video!

[@dmay1477]

First filter change on my 2007, thanks for the informational video and the parts list for upgrading the filter system. Very helpful!

[@lanichisholm6572]

Thanks. My four wheeler does this all the after it gets hot,, cleaned radiator, gas tank, and gas lines, ain’t thought about this one. Thanks man

[@blinko656]

Iam having the same problem, glad I found you....Mega help, going to take the cowling (sp) off today...:)Thanks again.

[@rsscully1]

Thanks. Glad to help. While the fuel filter issue wasn't helping anything, the problem I was having I contribute more to a stuck iacv (idle air control valve). I removed it and sprayed the carbon out of it with some brake cleaner. After I reinstalled the valve it fired right up and haven't had a problem since. I just wish I would have thought to shoot a video of this as well, but I was in the middle of snow plowing in the blizzard this year.

[@Sockman88]

Hey man did cleaning that valve solve your problem for good? I have the same problem on my 2012 foreman.

[@dmh3566]

Thanks very much! I have watched a few of these and yours is best. Especially appreciate the parts list. We have the same machines right down to the natural camo.

[@rsscully1]

You're welcome. Glad I could help. Hope you got your machine working.

[@639Beaver]

Wish you had shown how to take off the pump , repair breakdown, and re-install.

[@Zephward]

... Or even mention the fucking store name where said parts were ordered from ...

[@markbarker6940]

Great video, I have a 2012 500 foreman es and had the same problem, it was stalling out and got to the point it wouldn't even start, my filter was dirty just like yours. My fuel pump is identical. The other line you spoke of coming off the top of the pump is a return line to the top of the tank

[@Sockman88]

Mark Barker , hey dude i alao have a 2012 foreman doing this. Did the fuel filter fix the issue?

[@intothewild2345]

Thanks for the video saved me a trip to the honda shop at over $60 an hour I can do this!

[@kennethattard5538]

Good job on the video. Thanks for taking the time to do it.

[@mikenovak6892]

Did you have a problem fitting the new replacement plastic back on like it was too long that the snaps wouldnt reach far enough close but not fitting have same part #s ( from vin# an model #) as you an honda said it was the correct part an if so what did you do to make it the plastic snaps clip. Anything special should just slide on.

[@mikenovak6892]

Just shove it wont break I had to put a ton of force to get it together. I didnt wanna break it but got irritated an shoved an it snaped on no problem but took alot of force.

[@stephenloganbill100]

I had the same problem but just keep pushing HARD and it will snap into placy.

[@tayNmaie]

I'm currently doing this on my 2010 rancher. I was having the same problem. but I'm stuck with putting it all back together I can't get the electrical plug to snap on. did you have a problem with this too?

[@HyperInflation2020]

I'm doing it also on my 2010 420 Rancher. Was riding Ocala national forest today and it was happening. Did it last time I was out there also, after it heats up.

[@brokensmile8487]

I just took my 08 ranchers fuel pump off and cleaned it really well. There is a small o-ring that fell out near the filter, where it connects. Where does that o-ring go? ,,would you know?

[@carcrazycansgarage3073]

Thanks for the video .My 420 is having the same problem .

[@phatrides222000]

I need to do mine. I have let the bike sit for 5 years now because of what I think was a fuel issue. Bike would die under load. Gonna fix it and sell it because I don't need a sport bike anymore. Its a trx700xx

[@patricioortega4237]

Hi, Did you have any problem like stalls at stops or something? I have an Chevrolet Aveo 2008, and I guess that my pre fuel filter is clogged too because when I going to stop the idle drops too low or if the tank has low level of fuel the engine run rough, I'm having loss of power too, It specially happens when the weather is cold and under load I changed spark plugs, wires, ignition coil, IAC, throttle body was cleaned and it continue happening Could be it the reason of my car's problem? Greetings!

[@masonmccraw3637]

how do u get the presure line off

[@ryansolomon5083]

how many hours did it take to remove,replace and reassemble the fuel filter???

[@justinheard5954]

F****** 15 minutes or less the tricky part is is when you pull that cup out of that other cup the damn thing over and sometimes swelling of the o ring on so I had to cut a piece out ove the old o ring! Cut the ends at a fdßbd super glued!. back togethe

[@justinheard5954]

My side cover off

[@tommygiles9899]

Just wanted your video and my 4 wheeler sounds like it maybe doing the same thing. I'm going to try this and see what happens.

[@samthompson3019]

The easy part is to replace the filter itself what this video shows. The hard part is getting the housing for the fuel pump off of the four wheeler.

[@ldondedam9717]

THANK YOU...GOING TO WORK ON ONE SOONISH.

[@williamhedtke6996]

How did you get that gas clip off

[@coachsaltgrade8025]

Very helpful , thanks for info !

[@jasongirlinghouse3575]

Do you have to refill the canister before putting backnin the back

[@rsscully1]

Shouldn't have to. Pump is gravity fed from the tank. Just cycle the key a few times to prime the system.

[@Winsuperx2]

Very good video. Thanks for sharing

[@ratedredneck96]

+rsscully1 my 2007 rancher 420 has a similar problem, it runs until it gets hot and then it dies, it will start back up and go a little further then die again, it eventually gets to where it wont even start, could the fuel filter be the problem? i will go ahead and clean the filter since its almost 10 years old but i need help with it ASAP please, thank you.

[@youfirst4412]

My 07 does exactly the same thing. Did you find out what was causing it?

[@ethanstevens168]

Yes sir it did thanks for the video

[@bobbyblevins4244]

Excellently

[@virgilsmith5792]

How do you remove that green clip from the fuel pump?

[@wespatrick9313]

Pull like hell

[@markfloyd5839]

GREAT VIDEO! How do I find part 2?

[@DRTE22]

Do you have a link for the parts? I want to do this to my ‘12 foreman

[@DRTE22]

Never mind! Perfect video! This should get me back in business

[@rsscully1]

Try a new spark plug. I chased down what I thought to be a fuel related problem and in the end I believe the symptoms I was having were the result of a bad plug.

[@jayschwartzenburg4708]

wish you woulda showed how the pump comes off and goes back on

[@fralin1966]

Wish you would have shown how to take the pressure line off and reinstall ??????

[@rsscully1]

Reinstall is easy just snaps back together. The reason I ordered the new connector clip was because I cut the old one off. Supposed to be able to squeeze and pull to remove but I ended up cutting mine.

[@rsscully1]

Honestly if you have an easy time disconnecting the fuel lines you should be able to do the whole thing in less than an hour. The fitting on the pressure line is a PITA to get off.

[@kytrapping5829]

rsscully1 how do you remove that clip psi fitting. I took it apart with that connected and cleaned mine out with injector and carb cleaner and dabbed it with paper towels till it was clear coming out of it and after reinstall it's working great thanks for the video but still would like to know how to remove the pressure fitting clip

[@dannyhenson6532]

thanks man it help out thank u

[@blairjosephbernard2011]

Hello I got a big problem I can’t figure out any tips to fixes it. When I have a full tank of fuel my fuel gauge just flashes and not reading how much fuel I have in the tank any idea what the fuck is going on with this problem

[@justinheard5954]

Even even you can just throw in that rubber good thing away you don't even needed that

[@dterr41958]

this was ok but not enough detail

[@shooter3288]

I can't get the line with the stupid green clip off lol

[@spiffdandy77]

thumbs down for not showing how to remove all the stuff before the video started.

[@confoundid]

The video was free so stop your complaining.

[@Micah2Loud]

how do u get the pressure line off

[@dantone1952]

Yea what's the secret ???

[@matthewhannay2284]

@@dantone1952 a pair of bent pointy nose pliers and squeeze bottom of the clip then the line pulls off.