Fuel System and Engine Prep Part 3

2 inch diameter hose all the way from the filler neck into the tanks. Using these off the shelf products:
1) Oneida DAW450200 2" Vacuum Hose Y-Branch
2) Lifegard Aquatics 1-1/2-Inch Standard Threaded Bulkhead
3) Gates 24712 Fuel Hose, 2" - 45° bend
4) Gates 23972 Fuel Hose, 2", 3 ft long straight
5) 2" Inch Fuel Filler Hose Joiner - Coupling, part number CPL200
6) 2-3/8" Hole Saw

[@adamj.1645]

Awesome build! Can't wait to see more.

[@Back-Yard-Builds]

More to come later this week! Engine is back in and updates to fuel system.

[@trav3483]

Don't use the rear transfer pump unless you can program it properly. Mine came with a manual switch to pump it firward and I finally gravity feed the front. The fuel gauge kinda hates it when driving and it freaks out after a about 200 miles of staying full but goes to normal once it sees the level go back down. Pretty sure the pcs steer box works on this with kryptonite.

[@Back-Yard-Builds]

@@trav3483 Appreciate the info!