FULL AUTO Mode | IVT Transmission Basics | 4600 Command Center

[@dylanfrerking6671]

This video is from 8 years ago, but i will be getting my first ivt and this vido sure will help. Thank you.

[@KoenigEquipment]

Thanks for the positive feedback! We're happy to hear it's still helpful.

[@dylanfrerking6671]

@@KoenigEquipment I am actually going through your playlist now for this monitor. Seems to be helping.

[@joaquinmares3678]

The clutch is needed for shifting from f1 to f2?

[@Brton236]

No

[@bitcornfarmer6868]

What is the recommended way to slow down? pull orange nob back or throttle all the way back then pull nob back?

[@KoenigEquipment]

Hi Adam. Either option will work. If you happen to be in a low load application in which you don't need many RPMs, such as road transport, we usually prefer to use the throttle to slow down and come to a stop since that gives a smoother response.

[@davidkarnics2841]

@@KoenigEquipment is it possible to drive the tractor with full speed just with the little stick full speed means 36mph?

[@KoenigEquipment]

@@davidkarnics2841 Hi, David! If the throttle is full forward, you can drive with the stick and go full speed.

[@davidkarnics2841]

@@KoenigEquipment thank you very much!!! Greetings from Austria

[@jimstepan3038]

Drive it like you would drive a pickup with automatic transmission; throttle and brakes 😉 Most of the settings he was demonstrating were "field cruise" type functions; useful for extended duty field operations 🤷🏻‍♂️ 🙋🏻‍♂️