Full Car Audio System Installation - Phase 2, New Amps, Pioneer DSP

[@WadeWoodring]

Ex pro installer here, I tip my hat to you sir. A man after my own heart. Great work!

[@Qualitymobilevideo]

Wow, thanks!

[@crisknapp1990]

@@Qualitymobilevideo what should I put in my 98 gtp that don't cost a fortune

[@michaelmarquez6133]

I installed some pioneer type r and running a jl amp but I used the existing wire, should I run new wire all the way to the amp or will it matter really? Thanks

[@aircoolednation423]

who else watches these kind of videos just because its so satisfying and you dont have enough cars to keep on doing this.

[@rmblwgn]

I literally do it for free for friends based on what i've learned online and doing it on my own cars since 16(first few times were a bitch). I make a list for them and assuming they buy everything I don't even charge because I like doing it so much. I have already installed simple headunit/amp/sub systems in 3 coworkers cars lol. The first one was painful as he bought a $20 cca "4 gauge" kit from amazon. God did that hurt me to put into a brand new chevy truck knowing it wouldn't fully meet the demands of his underrated kicker 600.1

[@Mahlakai]

Wtf.. u find this satisfying my man? This to me makes me not wanna touch another wire again..any tips where I can find a good guide online to hook up an amp and subwoofer to a 2012 maxima factory stereo?

[@rmblwgn]

@@Mahlakai step 1) get a quality line ouput converter like pac sni35 or audio control lc2i. this gives you signalto send to your sub woofer amp using standardized RCA plug which your factory radio does not have . Step 2) tap into rear speakers wire in trunk. Step 3) connect that speaker wire to loc from step one using aftermarket OFC copper speaker wire and ziptie loc out of the way above trunk Step 4) run ofc 4 or 8 gauge power wire to trunk and into amp(knuconceptz makes best kit its on amazon) Step 5) ground amp to BARE metal in trunk(no paint) Step 6) run a short rca cable from loc to amp Set gain on amp but dont slam it wide open like a scrub and blow ur sub.

[@mitch_lambert]

@@Mahlakai go to bestbuy after they re open. They'll install everything for 200 doesn't matter where you buy it and lifetime warranty just pay 200 plus parts

[@alaricace8118]

@@rmblwgn Same mental state on me also buddy, Are we crazy? No that is called personal satisfaction!

[@victormuna5841]

So far the best installation I have ever seen the entire youtube yet so satisfying. Much respect Bro, you're the definition of a real professional. You'd give people a run for their money.

[@Qualitymobilevideo]

I appreciate that!

[@csmers3743]

This was so satisfying to watch! I'm currently in the middle of doing my own install but watch the pro's for tips and tricks. By far one of thr cleanest installs ever, along with the care and attention to detail. Awesome job!!! True professional..the abs heat trick to bend was a great tip!!! 👍🏽

[@Qualitymobilevideo]

Thank you!

[@joycecollymore9204]

You CA1

[@isaacjeanenel6498]

Met pyew atè

[@treydaypnw]

This guy Lorenzo is Definitely at the pinnacle of the car audio profession. Man what precise attention to details. Not an installer, a certified Craftsman in the art of sound, Great Job! 👏🏾

[@Qualitymobilevideo]

Wow, thanks!

[@napoleong011]

I’m appreciated for your efforts to make this video. I have exactly the sample car, the similar system with the Factory Radio, T wiring harness, 1 AudioControl lc7i audio line output converter, 1 amplifier 4 Channels, a component speaker JBL Gto 609C for the front, a co-axial speaker Infinity Kappa 693.11 for the rear side speakers and a Subwoofer Rockford P300-12 with build-in amplifier. I did all my own works and this was the first time I tried to install a full car audio system by myself. For the first few seconds I saw this video, I thought was popped out of my mind: Darn it!! I wish I had this video sooner, it would save me a ton of time to research everything (tools, parts, harness, materials, the way to disassemble panel,...). I’m in the middle of installing process now. I learnt some things new from your video: - I gonna need to double check my T-wiring harness, for sure I need to change some wires as you did. - I also learnt how to build a amp crack like a professional. - I gonna need to double check the output voltage for each channel. There is one more thing I still concern about my system. The front speaker I have is JBL Gto 609c which runs at 4 Ohms and the rear speaker is Kappa 693.11 runs at 2 Ohms. I didn’t notice the different Ohms when I bought these speakers. Is that safe for the amplifier if I run 2 speakers system which are different in Ohms? My amplifier is MTX Thunder 75.4 (75W RMS per channels, can handle from 2-6 Ohms speakers).

[@bbfoto7248]

+Kiet Pham Your MTX amplifier will be perfectly fine running your 2-Ohm Kappa's and 4-Ohm JBL speakers. No problem. You will need to adjust the amplifier "gain adjustment" lower for the Rear channels (usually channels 3 & 4 on the amplifier).

[@Patrick........]

Geez man. high end installer. You are a topnotch installer. Cheers to you. You secured the whole system properly and neatly. It's not just making it work, it's the small details that you put in it that is really really hard to do. It does not matter if the system is entry, mid or high end level, its your high end installation that matters. Thanks for sharing your talent. Best of luck man. Keep it up!

[@Qualitymobilevideo]

Thanks so much Patrick!!!

[@irickypoleman2691]

Now that's the way it's done. Soldering each contact for a strong connection. And the use of shrink tubing was awesomely done. Excellent job. 👍👍👍👍

[@Qualitymobilevideo]

Glad you liked it!

[@ayushsharma5267]

Not ever seen this type of perfection. Infinite love and likes from India. KZbin likes are not enough for your work, really brilliant job.

[@Qualitymobilevideo]

Thank you so much 😀

[@full_metal_everything6929]

@@Qualitymobilevideo How much does the installation cost?

[@ankushsahni8424]

No one able to judge whether its a company fitting or aftermarket…excellent work kudos

[@BoomBoom-me8in]

When an installer knows how to count and depin pins, your in great hands!!!

[@Qualitymobilevideo]

😂👌

[@techFPV5964]

Lorenzo i have learned so much just from watching you work. Your probably one of the best installers on the planet!!!

[@Qualitymobilevideo]

Thank you Harry!

[@kevenhill1755]

His level of detail is so satisfying to watch

[@Qualitymobilevideo]

Thanks!

[@AKMR.187]

I totally agree 💯👍🏾

[@AKMR.187]

I watched from beginning to end... awesome job amazing video I do believe I have the same pioneer processor...were can I find the app for my phone 🤳📱 I'd like to tune mine to spec...like in your video Thank ya kindly in advance brother 👌🏾🤙🏾✌🏾...have a wonderful and blessed weekend ‼️

[@Arivera41682]

i really like your vids man you do some extremely quality work. you use proper connectors, loom everything, mount things properly,and put everything back like it supposed to be..... VERY GOOD WORK BROTHER, TRUE PROFESSIONAL YOU ARE

[@Qualitymobilevideo]

Thank you! 👌

[@Ella-gb3rj]

Wow, this is an amazing installation! The new amps and Pioneer DSP really make a difference in sound quality. Great job on phase two of the car audio system installation!

[@Qualitymobilevideo]

Glad you liked it!

[@John_the_baptized]

I wish I had a quality installer near me like this guy. Then I would have confidence in the work being done

[@letsgonow5641]

Lot of politics in these shops. If you buy stuff from them an pay their markup they gladly help you. Bring the stuff too them an they tell you that they are too busy or come back another day.

[@abloke12]

He's not a quality installer, a quality installer would zip tie the cables, not tape them up, in case you have to troubleshoot, there's no need to untape and retape.

[@carolsmaple4763]

@@letsgonow5641 Especially the shops in and around LaGrange, TX.

[@ivorycorbitt2579]

i had all equipment purchase as a gift. 1-6 channel amp,amp kit component set, radio and a sub enclosure. local shop wanted $1100 for installation

[@letsgonow5641]

@@ivorycorbitt2579 Jebus really! I had it can be pricey but didnt know it was that bad..I have a friend that works installing this stuff but unfortunately he stopped communicating with me over a misunderstanding with another friend that had no involvement in.

[@djgblaze1of1]

Your installs are on a different level

[@garthmuir6023]

I have seen that much attention to detail ever. Great job

[@Qualitymobilevideo]

Thanks!

[@ekimandersom4478]

Then you might wanna watch some more video's. I recommend Five star car stereo

[@bonzainews]

Professional as always. I give Lorenzo credit for being so patient. Personally I don't have enough time to make a system that pretty. Plus none of my cars are newer than 2000 and don't warrant wiring a system that will outlast the car itself...

[@Qualitymobilevideo]

Thanks Larry! If only you guys knew how many hours this one took him!

[@protectyourcar5889]

I like the way u doing the harness! No modification or cut... good job.

[@Qualitymobilevideo]

:)

[@qjones6903]

@@Qualitymobilevideo the o

[@andykalnins9846]

Fascinating. I recently had a full audio system installed. It was a little more involved than this, and this was a lot. I had 2 sets of Focal components running active crossover setup, utilizing 2 amplifiers, one for the tweets and one for the midrange drivers. A JL Audio 75/4 and a JL Audio 75/2 respectively. Active setup is a huge difference in sound. A 500/1 JL mono lock amp for 2 JL 12’s, 2 gauge wire from the battery, and 4 gauge into the bigger amps, a Rockford Fosgate DSP/interface, and Dynamat where it was needed. And window tint. I already owned all the equipment except for the DSP and the 2 channel amp, and the cost for parts and labor was still around $3,800. Now I can see why labor rates for this kind of work are what they are. This guy is a master installer.

[@Qualitymobilevideo]

Thanks Andy!

[@michaelmarquez6133]

Hi I know this has been a while ago now but I just got my dsp and i have a 5 channel JL amp I'm just wondering about the wiring like the speaker wire goes to the 5 channel amp right, but the rca goes first to the dsp? Then rca dsp to amp ? Thx

[@andykalnins9846]

@@michaelmarquez6133 I didn't install it myself, I had it professionally installed. Cars are far more complicated than they used to be. I wasn't even going to attempt it.

[@michaelmarquez6133]

@andykalnins9846 I hear you haha it's been a lot of effort on my part but I actually got an older car but taken care of for that reason ! I bought a 2010 toyota camry with 45000 miles so it's a little easier but still. Mind if I ask you like around how much everything was to do? I'm guessing I wouldn't really be able to afford it to have a shop do it you know

[@andykalnins9846]

@@michaelmarquez6133 I definitely hear that. The labor to install everything can be as much as all the parts to the system. It's different if the system is 100% aftermarket but it gets tricky when integrating with an Infotainment type system which comes with modern cars. My 75x4 amp was going so I got an 8 channel JL VXI amp instead, and had the Focal 3.5" installed as well. Look that amp up, it's a lot of technology in one amp.

[@pedrorubio950]

Now he’s the definition of a professional installer , Good work man and love from VA

[@Qualitymobilevideo]

Thanks Pedro!

[@brostugen]

that mount for the Pioneer DSP is really something, like factory install, neat and tucked away

[@matthewstringfield8924]

That was freaking awesome. A lot of people fast forward or play music during the install and I don’t like that. I am willing to sit and watch a two hour install video as long as I can learn from it. I would have like if you spent more time on the tuning and explaining that process.

[@floraxu5541]

rpr

[@budigalaxy2278]

l0lll0ll lllll0l 000000000o0000090900ll00l00000l00900000ll00pl09l00000000909l00l0o900000o09llll0090ll00000009o00l0o000ò0o0l00ll00l00l000llll000l0l000l0l0llll09o0l00l0l009l9l000o090l000000000000lll0909l0l90llpl000l000000lo000ll0000oo000000000090000l0oò0ll00lo9l0p0ĺlp0ol 090000po00l0o00l00000000000ll00oo000000l0l000l0000ll09000l0lo0l00000poo00000000000lllllllllllllllllllllllllllllll0l0llllllllllllllllllllll00llllllllllllllllll0lllllllllll00o0000o0l0000llll000o0l900ll0ll0llll9llllll9lllll0llo0lllllllllllllllllllllpll9ll00lllllllllllllll00lllllllll0l9llllll0lllllll0llllllllllllllllllllllll00ll0l0llllllll0o0lll0lll lllll0llllllll0l0lll0llllllllllllllllllllllllllll0l0ll0llll00llll0lllll0lll0lllll

[@budigalaxy2278]

llllllllplll0ll0lll0000llllll0l0l0l0ll0lp00l0llll

[@budigalaxy2278]

l0llllllllllllllllllllllllllllllllllllllllllllllllllllllll0lllll0l0l0lllll0llllllllllllllllllllllllllllllllllllllllll0l0lllllllll0llpl0lll0lll0lll0ll0ollll0ol0ll0l0ll00ll0oll0lll0lllllllllllllll0lllll0l0l0llllllp0lll0l00lllllll0lllo0ll000l0lllllllllllll0l0l0lllplll0lo00l0lllllllllll0lll0llll0lllol0llllllllllll0lll0l0llll0l0l0l000l0lllll0l000l0llll0llll0lllll0pllllll0lllllllllllllll0lllllllllpl0llolllll0ll0lpll0lll0lllllpl0ll00lll0lllll00lllllll

[@budigalaxy2278]

0llllllllllll0llllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllllll0lll0llllllll000l0llllllllllllll00lll00o0lllllllllllll0l0lll

[@TheVolord]

чувак, вот это у тебя терпения!!! я так с тобой переживал, когда у тебя короткие замыкания случались. это ужасно было. как ножом по сердцу. но ты молодец!!! кстати. чтобы клепку установить в пластик, с обратной стороны удобно использовать подходящую шайбу - ведь это так легко!

[@johne.3678]

I like seeing all the fabrication being done by hand.

[@Qualitymobilevideo]

It’s nice to get the hands dirty, keyboard warrior isn’t fun

[@officialankitpanjeta]

The best ever SATISFYING video ever seen. Nice ,CLEAN and the working patience of this guy is no words to explain. Full details,really really impressive the way he works. Last but not least “NO FUCKING CUTTING WITH THE OEM WIRING “ this was the best part . Love u bro , love your work. God bless you

[@Qualitymobilevideo]

Thank you!!!

[@brucebmendoza]

As I am sitting at my desk I have this playing on my phone watching from the corner from my eye.. This is oddly so satisfying lol. I’m seriously digging your skills. Old school. If you do some thing. You do it right.

[@GeneralBrosky]

🥵😤 Rex t t

[@raltonseptember7510]

Must be the most satisfying install I've seen. Craftsmanship. Galaxy rating.

[@Qualitymobilevideo]

:)

[@qunicetoole7497]

What a serious attention to detail car audio install possibly $2,500 job, not counting the parts, I see y installers charge what they charge cuz it takes hours if not a day depending on the complexity of the install.😎✌👍

[@Qualitymobilevideo]

TY! 😎

[@vaboy_]

This was the most detail clean and well thought put together install I have seen in years

[@Qualitymobilevideo]

Thank you!

[@tonguetwisterap]

This is by far the cleanest and most detailed install I’ve seen. Great job guys...

[@Qualitymobilevideo]

Thanks!

[@mthombenimasonwabe]

Man your work is so beautiful wow I was actually drooling the whole time I was watching this!!

[@Qualitymobilevideo]

Wow, thank you!

[@KurtisPape]

What satisfying video to watch, you guys go all out with heatshrink, solder, cable ties, wire loom, tape, custom brackets with threaded inserts and just overall cable management. I love the crimp and solder combo! All this and I will pick on 1 minor detail, some bootlaces on the distribution block would have been nice. I relate to this install, I went all out like this for my minor system, just simple things like using di-electric grease on outside connections, stainless steel bolts and mounting the fuse and having tidy cable work. It can take double the time but is for sure worth it and you will guaranteed to never have any short circuits.

[@Qualitymobilevideo]

Thanks Kurtis! Some people think we go too far, but we like to make all installations as close to, if not better, than factory quality

[@KurtisPape]

@@Qualitymobilevideo better job then toyota could ever do hahaha

[@arinhiwa4017]

You are so clever than the Japanese ,because the couldn't do that job like you , your work is awesome .

[@Qualitymobilevideo]

Thank you very much!

[@DennisNarayan]

So much hardwork, patience, skill, materials, time and effort put in to get a perfectly neat installation from point A to Z... so amazing! Love it! Awesome work done! Hats off to your amazing work bro! I've lesrnt so much while watching this video.. i didn't even fast forward any part of it 😊

[@Qualitymobilevideo]

Much appreciated!

[@rmblwgn]

ALL THAT WORK AND USING UNDERSIZED(6awg) CCA 4 GAUGE WIRE ): I know its sufficient for lower amperage setups but it degrades so much over time and can become a fire hazard. The stuff oxidizes and crumbles like crazy!! Ask me how I know :/ spent 4 hours installing some into my car when I hadn't watched pros like you guys and next thing I know my wire ends are all dusty and flaking off leading to amp turning off at times. The connection to battery/fuse was done with ring terminals and crimped with hydraulic crimper.. no lose connection excuse. Ended up buying a knuconceptz TINNED ofc wiring kit for $55 which blew me away with how beefy and quality all the components were.

[@peekapumkin]

This is a really inspiring video. Perfectly clean install, attention to detail. Makes me want to rip out my install and do it over!

[@Qualitymobilevideo]

Lol thanks Allan!

[@jonathanpinders.r.5627]

You guys always do fantastic work your car will be jamming now. Simple but classy. Say hello to your mother for me

[@jaroslavvolek6222]

love how you keep replying to comments until this day, great work btw! those details are just perfect👌🏻

[@Qualitymobilevideo]

Thank you so much 😀

[@markchambers8641]

You really take time to master and make your work look great.

[@Qualitymobilevideo]

Thanks Paul!

[@hectorortega9131]

No install Details overlooked here, good job. i bet it was exausting at the end pf the day but well worth, a job like that speaks for it self. 🖒

[@Qualitymobilevideo]

End of the many dayssss lol thanks Hector!

[@noecker97]

It's Refreshing To See That Some People Actually Still Use Soldering Iron w/Shrink Wrap To Connect The Wires and Not Just Tie-ing Them Together...

[@JT8D200C]

At around 3:30 that missing 5th wire is for the dimmer function it controls the brightness of the stereo from the dimmer switch some of those wiring harness adapters have the 5th wire but aftermarket stereos dint use it

[@Hesbonful]

RESPECT to your quality commitment.

[@Qualitymobilevideo]

Thanks!

[@xthumpx1]

The best video I have ever seen on car audio installation, and the cleanest install I have ever seen. You're obviously a master and take tremendous pride in your craft.

[@clintcurtis9630]

Then Dean and Fernando will really rock your world. Look up 5 star car stereo on KZbin

[@xthumpx1]

@@clintcurtis9630 I'm a big fan there too

[@ZYadao]

I thought i did a good job on mine. No way as brilliant on how you did your install. Awesome work!

[@Qualitymobilevideo]

Wow, thanks!

[@SuperBongface]

Kenwood has always made excellent car audio EVERYTHING :D

[@sponta22]

The most detailed job I ever seen

[@Qualitymobilevideo]

:)

[@chris6074]

This is the most chill installation video i don’t not regret watching the whole video 😁

[@Qualitymobilevideo]

😁😁😁

[@ANT5003]

Wow, I love how you took your time and did this correctly. Great work.

[@Qualitymobilevideo]

:)

[@jasonmadden4588]

,À

[@techFPV5964]

Hey Lorenzo on the Kenwood KAC-D8105 is it possible to add an RCA adapted Bass knob to this system since it doesn't come with one? Thnx bro!

[@Qualitymobilevideo]

Hey Harry! The KAC-D8105 does not have remote bass control option. Generally that comes with monoblocks

[@techFPV5964]

@@Qualitymobilevideo I really appreciate your taking time to answer my questions Lorenzo, it shows the kind of Customer service QMV gives!

[@techFPV5964]

Hi Lorenzo i think i didn't ask my question properly. I would like to add a PAC Bass knob to my amp however the Head Unit does not have RCA inputs.. How do i need to wire the knob between the head unit and the amp, it has the sub RCA inputs open? Thanks Lorenzo your awesome and so are your videos!!!

[@techFPV5964]

Hey Lorenzo i'm having my Bass knob installed tomorrow, it turns out there are rca inputs my installer put in the back of my HU!

[@techFPV5964]

I now have my long awaited Bass Knob now i just need to learn how to tune my amp as well as the best way to use my Bass Knob. Using the Knob with the tuning is what i need help with.Lorenzo do you have a video that will help me tune both??

[@marksalisbury1132]

awesome video!! Ty you might want to consider putting sound deadening on the seat back. in between the seat and plastic amp board. i know its additional cost, but could save a headache later.. literally lol

[@juliosandoval8244]

Can those grounds be that long like 3 feet?

[@rfgate]

Nice clean wiring.. glad I am not the only one who uses a razor blade to trim wire.

[@Qualitymobilevideo]

Right on!

[@diywork6384]

Bro I love the way neat clean and detailed work you do it’s not that easy to work this cleanly keep it up good job if I ever got chance I’ll drop my ride to get it done everything your way god bless you

[@73kokitch]

Just an idea, you could put all the cables underneath the templates you made to mount the amps, and make a holes in front of the amps connections and fish out the cables from there. That way it would look even cleaner. Anyway perfect job my friend!

[@jpro83]

Holly OCD!!! I love it!! Clean AF!!!! That would have taken me a year to do!!! Your a beast man!!

[@Qualitymobilevideo]

Thanks Justin!

[@gotti8467]

Lol 😆

[@gregsantos9731]

Wow! You do your project very well and neatly done! Very professional, inspiring and knolegable! Thanks!!! 👍😃🤘

[@Qualitymobilevideo]

Thank you very much!

[@leroyderamus8311]

I am just glad you aren't a bomb maker. That install is super nice. Props for mad skills!

[@Qualitymobilevideo]

HA!

[@brianmokah2801]

The installation looks expensive than the car itself😀 Great job

[@Qualitymobilevideo]

Thanks! 👍

[@NoOne56488]

always test before putting the car back together, I've learnt the hard way when i was younger lol

[@Finite-Tuning]

Good job man, you can install my stuff anytime! I do my own installs naturally, but you do it like I do, crimp then solder then heat shrink, there is no better way when quality matters. Just one thing I do that you might consider, I tin the ends of my power cables and I use silver bearing solder for everything. It's a little more expensive but it will eliminate any chance of corrosion and it conducts better than gold. Plus, a tinned end gives the clamps something hard and solid to bite down on rather than just soft stranded wire. I enjoyed this video, good stuff man! Cheers 🍻

[@Qualitymobilevideo]

Thanks bud!

[@robinong5803]

About the parking wire, did u connect to e-brake switch or bypass?

[@grandtrunkgt]

Very nicely done👍 I need help regarding choosing a DSP for my 4 speaker setup in a sedan. Can you please suggest which DSP of the two will be the best, Pioneer DEQ-1000A or Jbl DSP 2544? Awaiting you quick reply Thanks & regards

[@Qualitymobilevideo]

The DEQ-1000A has been discontinued now.

[@sidnei2017]

Hello, could you tell me, did you like the result of the Pioneer Dsp? I want to add in my car that uses HUOEM, and I did not know if I will improve on the result.

[@Qualitymobilevideo]

Yes, overall it adds great sound and more power. The only downside is the custom EQ's will only work with a USB connection to the DSP

[@sidnei2017]

@@Qualitymobilevideo Thank you very much for the return, and congratulations for the very high quality with which you do the installation,. This question of being able to use equalizations only with USB connected. Is this need only for equalizations? The crossover etc etc settings are saved in the processor without the need for USB? had forgotten to ask, the calibration you do, is the automatic planning of the signal of the player? Hug.

[@alexanderpennha5683]

hello i am fascinating watching doing your connections , so cross my mind what or how i should do for my 2014 honda odyssey to improve the sound or at least add a speaker for the road of seats .... would you tip me some ideas how i can manage it ?thank you

[@slackerzsincity8822]

Nicely done sir, but my coworker is asking me to install his speaker system and im kinda OCD with making it clean with ferrule, braided sleeves.

[@tysonmattox5823]

I like how you have all the stuff listed, but the only thing you don’t have listed is the abs plastic board. I would really like to know where you pick that up, and size and thickness.

[@DJDynamite]

You can get almost anything on Amazon.... ABS Black Plastic Sheet 1/4" x 24" x 48" Textured 1 Side Vacuum Forming www.amazon.com/dp/B07BX4GW6L/ref=cm_sw_r_cp_apa_i_SpvGDb0DXB9M8

[@DJDynamite]

ABS Black Plastic Sheet 1/4" x 24" x 48" Textured 1 Side Vacuum Forming www.amazon.com/dp/B07BX4GW6L/ref=cm_sw_r_cp_apa_i_SpvGDb0DXB9M8

[@LIFEINSPEED]

Thats amazing quality Installations, I wish we have like you guys here in NY We have installer who uses only duct tap and scotch tape for connections

[@Qualitymobilevideo]

LMFAO we've seen some bad installs ourselves

[@DjTRex08]

Not sold on the idea of amp's processors or anything for that matter mounted on the back seats like that. Prefer a amp rack a truck cavity or even under the front seats. Still a nice job.

[@junballs6576]

What's wrong with it in the back. Seems out of site & out of mine. Also it'll stay clean in the truck vs under the seat.

[@ShazdownMmw]

i never saw a level of perfection than this...god bless you mister :o

[@Qualitymobilevideo]

Thanks!

[@tatsuo91]

That thin wire is nothing, dont worry, i changed the stock radio for a pioneer, i also had the same metra kit you had and there was zero problem, also the SWC is in a separete plug, it has the 3.5 rca wires and 3 wires for the swc

[@notverystealthy9165]

It’s illumination

[@tatsuo91]

@@notverystealthy9165 illumination is orange, and its on the main plug

[@viniciogomez9863]

I want to do that in the Hyundai Tucson NX4, from 6 speakers to 8 speakers with amplifier and 1 subwoofer. What would you recommend?

[@copdwarriormcdonald7968]

outstanding install! Game on for my 2020 Camry XSE SQ build! thanks for sharing and Ideas on these new car installs!

[@Qualitymobilevideo]

Our pleasure!

[@jerzeeal3368]

love the video but whats the music play list your using while do the install????

[@Qualitymobilevideo]

We actually pay for a music subscription service for content usage. The artist mostly used in the video is "Sarah the Illstrumentalist"

[@LIL-RJ]

Could this be a career? Just wondering because I love wiring things! Especially in vehicles! Also I watched the whole video and I am amazed, really considering doing something like this as a career!

[@Qualitymobilevideo]

Anything is possible!

[@chrisyoung186]

Absolutely I know a guy Who has a car audio/window tinting/and customer car wrap Shop ...and he enters audio competitions all the time and had won multiple competitions (which usually pay a cash prize).. so yes it is definitely a career option and a financially comfortable one at that!!!💯💯

[@BFTVCanada]

I loved installing car audio systems as a kid so I became an electrician. 10 years later started my own company. Wiring things is fun and can definitely turn into career as electrical work is very broad. From car audio to film to commercial/residential and more💯👊

[@hassanalkhawaher3161]

Great job Mr. Stone cold ( Steve Austin ) 😅😅😅✌️. Done nicely and clean, and it sounds so clear and awesome!

[@Qualitymobilevideo]

Lol glad you like it!!!

[@stevenpillay5323]

Hi there great install.... however is it possible to assist me... i have purchased the exact same DSP... but im not getting playback from the factory radio... i used a standard VW iso plug

[@lovepetttl.p3272]

You make the job nice and clean, i like that

[@Qualitymobilevideo]

Thanks 👍

[@rpspereirabarao3809]

it's another level, your job is very good, I'm still going to work in place of that level

[@Qualitymobilevideo]

Thank you!

[@drunklunchbox619]

Bro, get yourself a Dewalt heat gun with at least an 6ah battery. Nice work. You're seriously the only person, other than myself, OCD enough to do half this stuff.

[@Qualitymobilevideo]

Good looks, we'll look into it!

[@73kokitch]

Wow such a nice and clean install, just by watching you soo many ideas came to my mind. I’ll definitely re-do my install. Thanks for the inspiration and awesome job!

[@infinitechoes]

Hi Lorenzo, is it possible to have a 3 way component active setup in front with this DSP as it has 6 DSP output. I want to setup 3 way Morel Maximo Ultra 603 MKII Active speakers in front. I want to retain the back speakers as factory stock speaker connected directly with the head unit. So i want to process FL and FR from Head unit using this DSP to get 6 separate filtered signals each for 2 front tweeters, 2 front mids and 2 front woofers. These signals would be amplified and then give them to drivers. Also i want to power a sub woofer. Do you think is this setup possible with this DSP and a 6 or 8 channel amplifier? Please answer. Thanks in advance. It would be a great help from you., 🙏🏼

[@YTSTK89]

Cant believe you guys used some wood screws the first time around. 🤦🏽‍♂️. Glad to see it's being fixed.

[@dradmirable7343]

Could I do this to my 2018 cruze? I wanna try and keep my radio and it seems like this was one of the easiest ways to this

[@UNFUQWITABLEL33SKI]

So when installing a dsp, do you have to run new speaker wire? I don’t have an amp for my mids and highs, do I just connect the dsp speaker wire to the radio harness? I also only have one rca for a sub, will the dsp to do its job?

[@baylor3769]

Ok I really need some help here I have a single amp setup currently and a single din head unit with only 2 rca out puts I’m wanting to add a amp for my door speakers but only have 2 rca’s on the back of my head unit do I have to get a rca splitter or do I have to get a head unit with rca hook ups for a 4 channel amp

[@mark-2grande-g864]

Здравствуйте! Пишу из России. Очень понравилось ваше видео. Всё понятно и доходчиво рассказали и показали. Подписался на ваш канал, буду следить за вашим творчеством! Успехов вам и крепкого здоровья! Hello there! I write from Russia. I really liked your video. Everything is clear and clearly told and shown. I subscribed to your channel, I will follow your creativity! I wish you success and good health!

[@amacl10]

I see a lot of Five Star Car Stereo in this one. Even the Fernando Fancy fuse holder. Not a bad thing at all though. Great video 👍

[@jmaslin]

agreed, however all shops are becoming a better standard these days. I'm in Delaware and they're doing it up here too, check out Matt Schaeffer's page. He's crazy good with custom installation, he's in one of our local shops. Had a gut drive his BMW suv from Canada down here for him to do the install

[@Qualitymobilevideo]

Five Star does great installs, we all believe in doing them the right way

[@madmike5575]

@@Qualitymobilevideo where you guys located?

[@salvadorcueto8450]

I just sat for an hour and half watching this video and I enjoyed every minute. I would like to know where you guy’s located at to see if we can pay you a visit for a installation. I’m from Los Angeles, Ca.

[@Qualitymobilevideo]

hanks Salvador! Same! Unfortunately, we don't really do installs for the public and since we're understaffed right now due to the virus, it'd be almost impossible to shut down the store to do installs :(

[@614galb]

I feel like I missed a step. What did you hook up the ground wire to besides the frame of the car? The battery?

[@Qualitymobilevideo]

Yes, that's how the amplifier gets power. In the first video we did it with the blue 8 gauge power wire, then in this video we swapped it out the with red 4 gauge wire, go to 41:00

[@Qualitymobilevideo]

kzbin.info/www/bejne/jJq8Zal9pL6Metk

[@treydaypnw]

Hey Lorenzo, question 🤔 I noticed that on the amplifier speaker connections that you were using just standard metal spade connections instead of Gold terminals. Any reason reason for that? Do gold help with a cleaner signal to the speaker? Also is it advisable to always run new speaker cables of a thicker size or is SpeedWire, or 9 conductor wire, just as good? Can it handle all the power given it's thin gauge? Thanks!

[@orenmi]

Do you have to install the parking brake cable? The app telling me that i can't operate it while driving, but im not moving. I'm thinking maybe it's because i didn't install the parking brake cable?

[@Qualitymobilevideo]

Yea we grounded it!

[@orenmi]

@@Qualitymobilevideo it doesn't say anywhere, but if you dont ground it, the app cant operate. Learned the hard way.

[@Qualitymobilevideo]

@@orenmi Yea the manual isn't that great

[@vintagetweed]

Great work! Great to see more people taking the time to do things the proper way. Gotta say, 1:02:48 That big ass Techflex on the 18g remote wire might have been a bit over the top tho haha. I do really like that you don’t edit out the small mistakes, and instead show how you quickly fix them. Keep up the great work and awesome install vids!

[@Qualitymobilevideo]

Thanks Dan! Appreciate it

[@dsilvao]

Hello , awesome work.. could you please tell us the name and specs of the black plastic panel you used for mounting the amps on the back of the rear seats??

[@musibs]

Could you link what you are using to shrink the heat shrink please?

[@marvinhickman4175]

What’s the name of the black plastic board you mounted the amps to I can’t find it anywhere

[@richardbutterworth7873]

I want to replace the head unit in my car with a tablet and then I'll put the tablet to my amplifier is it possible to take the two channel audio out of the tablet and split it off into my four channels with subwoofer

[@Andy-eo8uj]

You are the "Mr.Miyagi" of car audio. Always learn something new each video I watch. What is that plastic Back you mounted amps to and fuse under hood? Don't see it in description. Thanks

[@Qualitymobilevideo]

Lol thanks Andy! That's just ABS plastic. Here's a link: www.qualitymobilevideo.com/89-00-9025.html