Full Fish Room Tour (Every Single Fish Tank)

[@scottwalmsley3393]

hi kirk, great tour regarding your tank for painting instead of waiting for the tank to cycle just get a cheap pump and just transfer the water to the new tank and then pump it back in when you have finished painting the old tank, you can do this with every tank you need to paint its how i did some of my tanks no waiting for the tanks to cycle.....all the best scott

[@Kirks_Aquariums]

Hi Scott. Thank you, i may have over stressed about the whole cycling process as afterwards i had much the same thought as you. Thank you for the heads up though i appreciate it the feedback and experiences

[@paulstingray]

Got time to watch! !

[@thedon219]

Awesome! My favs, full fishroom tours that are long! Thanks for sharing!

[@Kirks_Aquariums]

Thank you, I was a little worried about how long the video was but glad to hear you enjoyed it.

[@SecoyaHomeAquatics065]

Nice video Kirk...good to see more Aussie fish room tours out there...i'm subbed....love seeing what other people are doing

[@Kirks_Aquariums]

Amazing thank you. Theres a few of us Aussie fish keepers on youtube now. Are hou also from Australia?

[@carybritton4178]

Love the update brother 😎🤘🏼 I feel you on the water changes I still haven’t automated my system yet and it’s a lot of work. Keep breeding and doing your thing thanks for all you do and sharing the videos to motivate people like me boss

[@Kirks_Aquariums]

Thank you for the support and yeah manual water changing is definitely not the most fun but gotta do what you gotta do. Thank you for watching

[@metallicplatinum]

Great video! Love the channel. How big are most of your tanks? Looking to create a similar setup myself.

[@Kirks_Aquariums]

Thank you. Most of the tanks are 2ft and 3ft tanks but wider than standard ones.

[@Nomics415]

Lay the internal filter down in the angel fish tank the Palecos would enjoy the flow and it won’t be too much for the angelfish

[@Kirks_Aquariums]

Thank you for the advice i will have to try that and see if it helps with getting the L numbers to spawn

[@dang.8743]

I’ve had success getting angelfish to breed by lowering the temperature to 78F while simultaneously adding tannins. PH is 6.4

[@Kirks_Aquariums]

I might have to try that, i think it may also be this particular pair of angels too. Ive had great success with many pairs over the years but might try moving them or like you said lowering temp a bit. Thanks for the suggestion

[@Aquarium_Fantasy-HF]

The fish room is looking amazing 😊. How many aquariums to you have now 😮

[@Kirks_Aquariums]

Thank you, including tanks outside the fish room, about 32 its getting out of control 😂

[@14pedro415]

Very nice fish room . Were are u from

[@Kirks_Aquariums]

Thank you. Im from Brisbane Australia

[@southsidesky]

1) The large Geophagus and the one in the back getting picked on the most are males, and the other two look like females. 2) I doubt that the male ram fertilized the eggs, but you'll know that in a few days. If it were a good spawn, either the male or the female, (most of the time it's the female), will be hovering right on top of the eggs as they are developing. Good luck......................

[@Kirks_Aquariums]

Thank you for the heads up. So far so good with the ram eggs. Only a couple gone white so far.

[@DeflectionMode]

Hello, here watching and supporting you from Katy, Texas (near Houston). I have sbs-cr-bd to your channel as well. 😊

[@Kirks_Aquariums]

Welcome aboard and thank you for the support 😊

[@freshwaterfish4499]

Your set ups are some of the best I’ve ever seen keep up the good work. And when you get a chance and check out the content and if you like it drop a like and subscribe we will appreciate you thanks.

[@Kirks_Aquariums]

Thank you, there are way better set ups than mine but i really appreciate the support. Have subscribed to your channel also.