Done it today, time consuming but extremely satisfiyng :D Thanks mate!
@baz87553 ай бұрын
An easier way is to use a Dremel with a small engraving bit. Make 5mm holes all round the fuse and then Dremel them all together. Then use some snips to cut the fuse at the point where it joins the legs and use the Dremel to remove any remaining glue and clean up the legs ready for soldering. It only takes a few minutes and no risk of cutting fingers or snapping legs
@loafdad4 жыл бұрын
Very helpful Simon, thanks. I just did both sides and worked perfectly. 1st time mirrors have worked since my wife owned the car and she’s had it 6 years. Only thing, I did one side digging out like you and a bit of one leg snapped so I used a small drill on the other side really carefully so as not to go to deep and this worked much better for me. Thanks for your great video it gave me the confidence to have a go.
@badeyeuk4 жыл бұрын
Hi Andy, thanks for the feedback. To be honest since I made that video I did change my technique a little. I bought a dremel which made it so much easier to get the glue out, but it mean't dust went everywhere. Anyway, glad you managed to get your mirrors working once again.
@keshticlesp62695 жыл бұрын
Thanks for the video just did both sides, now working perfectly.
@badeyeuk4 жыл бұрын
Brilliant news, glad the viudeo helped you out.
@badeyeuk3 жыл бұрын
The specs for the poly fuses are: RXEF030 XF030 72V 0.3A 300MA PPTC Resettable Fuse These can be bought in bulk from places like eBay. Hope this helps.
@stebenit5 жыл бұрын
nicely done, done loads of these myself. I do it the same way but I snip the fuse head off just before I dig it out between the legs..
@badeyeuk4 жыл бұрын
steve b yeah I’ve done hundreds of repairs all over the world, I didn’t realise it was such a common problem.
@themic32833 жыл бұрын
Hi thanks for that, but can you change the Sides of this Moduls from the reigt to the left mirrow?
@nickreynolds6435 Жыл бұрын
Hi. Just watched your video and very good and clear. I have one question I purchased a complete SOD of eBay and just come to fit it all works but when mirror folds in other folds out and vice versa. Would the fuse have been wired up wrong way round? Many thanks.
@zubairjogee7556 Жыл бұрын
Do you ship to South Africa
@chriscooper5875 Жыл бұрын
Hi Simon how do I send to you for repair if needed to
@juanmaperera5 жыл бұрын
Thanks for the video, you help me a lot
@badeyeuk4 жыл бұрын
Brilliant news, glad the viudeo helped you out.
@gerritkolthof27733 жыл бұрын
Simon what's the value of the caps
@MidlandBulletRiders4 жыл бұрын
Would it not be less stressful on the legs if, when you are about to remove the filling from between them, to snip off the head of the fuse, then dig it out from between the remaining legs. Thus eliminating any pressure on them?
@badeyeuk4 жыл бұрын
Hi, upon some repairs I have found the legs burnt and snapped deep in the glue. Doing it this way saves the hassle in having to do the repair twice incase this is the case.
@owenjames80894 жыл бұрын
Hi I'm a new civic owner and my mirrors don't fold do you repair the set if I send them i know this video is 2 years old
@BalbirSingh-xx5se4 жыл бұрын
Hi very good video but I was wondering when you solder the new fuse dose it not make difference which legs you solder the legs a positive or negative. side's
@badeyeuk4 жыл бұрын
Hi Balbir, this my thoughts when I first started doing this but the fuses are reversible.
@leroybroekema4 жыл бұрын
Hi Simon, which fuse I need to use? I see many different types of polyfuses (like different Ampere). Thanks a lot!
@badeyeuk4 жыл бұрын
Hi Leroy, the fuses can be bought on eBay but you tend to only get them in large amounts. I still sell the fuses if you are interested at £1.80 per fuse incl postage to UK mainland. Message me if you are interested.
@squareblueorange4 жыл бұрын
Great vid! If the mirror doesn't fold at all will this repair help or is it something mores serious?
@badeyeuk4 жыл бұрын
Hi, if the mirror isn’t folding at all then there is a good chance this repair will solve it. You should be able to tell as soon as the remove the SOD and see it’s condition.
@chriscooper5875 Жыл бұрын
@@badeyeukhi how do I send you a pair to Repair ?
@jean-luccarbo72104 жыл бұрын
Great, thanks you !
@badeyeuk4 жыл бұрын
Brilliant news, glad the viudeo helped you out.
@izakkanter44594 жыл бұрын
Great video! What are the specs of the fuse? I don't live in the UK and buying them from you wouldn't be an option. Thanks for the help.
@badeyeuk3 жыл бұрын
RXEF030 XF030 72V 0.3A 300MA PPTC Resettable Fuse
@eljordii1233 жыл бұрын
Hi can you ship to italy?
@Simone.v10 ай бұрын
Ciao hai risolto? É stato difficile? Sto per cimentarmi nel lavoro.
@Dazwilde4 жыл бұрын
Hi Simon i have an issue with my mirrors where they actually fold out too much basically it doesnt stop at the correct point. Do you think i might have the issue with the SOD or something else?
@badeyeuk4 жыл бұрын
Hi Darrell, the issue you’re having sounds like a broken stop pin. The mirror has a plastic pin that basically stops the mirror from folding too far in itself. I’ve never repaired this fault or know if it can be repaired, could be a new mirror.
@Dazwilde4 жыл бұрын
@@badeyeuk Ah no worries thanks for getting back to me Simon, I'll pick up a 2nd hand mirror from somewhere.
@xxscoobypilotxx4 жыл бұрын
Are you still providing repair service?
@badeyeuk4 жыл бұрын
Hi, I no longer provide this service but I can still provide the fuses needed.
@johnbatten86894 жыл бұрын
Hi do you still do these repairs? What is the cost please as neither of my power mirrors on my honda crv mk2 on a 54 plate work.
@badeyeuk4 жыл бұрын
Hi John, sorry this fix is only for the Honda Civic and no the CRV.
@MK60625 жыл бұрын
Do you still provide this service? Thanks
@badeyeuk4 жыл бұрын
MK6062 sorry I no longer provide this service as I just don’t have time anymore. However I do sell the fuses for £1.70 each plus free postage if you’re interested
@kentagg15644 жыл бұрын
Think I’ll buy a poly fuse from you,since you know what type it is,can you send a contact detail...
@badeyeuk4 жыл бұрын
Hi Ken, if you could send payment via paypal to simonhammill@gmail.com and include your postal address, i'll get 2 fuses sent out to you. Cheers
@MrMatt39054 жыл бұрын
Hi thanks can I get se fuses of you please 😉
@badeyeuk4 жыл бұрын
Hi Matt, can you please email me how many you need and you postal address to simonhammill@gmail.com
@MT-ff9zf3 жыл бұрын
Hi mate can you send me a fuse ?
@svetruck10005 жыл бұрын
why not just crush the old one then solder new one to remaining pins simple
@keshticlesp62695 жыл бұрын
This is what i thought, just waiting for my fuses to come in the post.
@stebenit5 жыл бұрын
you could but the fuse would stick out too much and the mirror cap could hit it when putting it back on...
@harrysabin6735 жыл бұрын
steve b I have a mk8 civic but I. Have a different sod with different plugs my mirror only moves about an inch or so when button pressed on passanger side could you repair my sod ?
@badeyeuk4 жыл бұрын
harry sabin the Mk8 SOD does come in a couple of variations, the ones that the fuse cannot be seen I don’t think can be repaired, is this like yours?
@harrysabin6734 жыл бұрын
simon hammill hi no I can see the fuse it’s all repaired I decided to try it and it worked thanks to your video helped a lot