FULL VIDEO BUILD 1/48 F-15 Strike Eagle Hasegawa

FULL BUILD of US AIR FORCE F-15E Strike Eagle in 1/48 scale from Hasegawa
Please Like and Share the video
Thank you

[@TheModelGuy]

I think I've watched this about 15 times now prepping for my Hasegawa Eagle. Thanks for making it look so easy ;) haha

[@PerisModels]

Cannot wait for your video 😏

[@TheTedazerty]

Thank you it gives me a good hint on how I'll proceed with mine! Really nice of you!

[@ruqwknf115]

I recently found your channel and am impressed by your work. Hasegawa kits are the standards by which others have been judged for years. IMO, they are the ones who made other companies like Tamiya, Academy, Kinex and Hobby Boss step up their games. They are my go to kits, with Tamiya being second. Their overall attention to detail and as close to reality as you can get build quality, are tough to beat. Probably why I own a bunch of their late "90's to early 2000's un-built kits in my collection. Also, I prefer Eduard PE kits all the way, as well as Aires detail kits. Excellent choice in detail parts. I really like your weathering techniques, very nice. I've used Mig powder based and Tamiya weathering powders to acheive similar results. Now, I hope I don't come off sounding negative or a know it all type with these next comments, as I'm far from it. Here goes. There's only a few of things I would critique on this build, but this comes from my Crew Chief attention to detail mind set. * I would ease up on such dark panel lines with relatively clean/new paint. Typically those birds scheduled for paint would have darker panel lines by virtue of the build up of crud, grease and grime from numerous panel removals for maintenance between paint jobs. * With that load out, the jet is definitely heavy. At a minimum I would flat spot the bottoms of the tires to give it more of a "weight on wheels" appearance, vs a floating on tip toes look. The other trick is to heat them up a bit and press the tires slightly into a weighted look. There are a few aftermarket companies who cast them like this, but that just adds cost when the sanding + melting looks just as good. * I've noticed no safety pins/Remove before flight streamers. The jet's condition looks like it is just before start up, crew ingress. IIRC, the Zoom kit doesn't have them, but their RBF streamers are very nice and moldable. * I would definitely add safety pins/Remove before flight streamers to all weapons on a static jet, possibly even AIM-9 nose cone protectors, as it's very hard to replicate the true nose / seeker appearance with this scale. These safety pins/streamers are the last items removed at EOR (end of runway) by weapons crew members just before take off. Yellow AIM-9 nose cone protectors are typically removed before start up. That's really all I can see and your end result is very, very good. If I were judging a show, (done a few in my days) this one would definitely be in my top three candidates. Again, I hope my comments don't come off as negative or bad, I'm just giving some constructive criticism and trying to help. This is a really excellent example with what can be done with an older Hasegawa kit, in today's era of super detailed out of the box competition. Definitely keep up the excellent work.

[@PerisModels]

Patrick SETEC ASTRONOMY Rubio thank you my friend Your comments are valid and I will try to follow in the future Thank you for taking the time to watch and comment 🤙🏻🤙🏻🤙🏻

[@antreasxatzidakis6434]

Ľ

[@Ghostrider-71]

Hasegawa kits are really good, even the dated kits from the early ‘90s.

[@marciomaiajr]

I think this is a Revell kit reboxed by Hasegawa.

[@amuxpatch2798]

@@marciomaiajr In your fantasy mind,lol

[@johnrosebrock606]

I have an F-15 from Academy that I'll be starting shortly, I learned a lot and hope to duplicate the subtle weathering techniques you employed, WELL DONE!

[@PerisModels]

Thanks

[@MaxAfterburner]

Hi Peri, I finally got a chance to sit down and give your video its proper due. Once again you've done superior work with stunning results! I'm envious of your skills :-) Love the touch with the map up on the glare shield. I often saw that when I worked the F-16 flight line!

[@PerisModels]

Cheers buddy 👍🏻😁

[@BigGoy2009]

I've been binge watching a bunch of your videos. They are really nicely done and inspire me to get cracking on my own stash. Keep up the good work!

[@PerisModels]

Thank you my friend

[@dankuettel5063]

Nice touch of detail placing a map/chart in the windscreen

[@PerisModels]

Thanks 👍🏻

[@steves1112000]

Love it. Lots of nice extras. Love the weathering. Subtle. Not overstated.

[@PerisModels]

Stephen Smith thank you 🤙🏻🤙🏻🤙🏻

[@martinswanson3092]

I actually have this same kit in my closet; will be using this as a guide to build it. Excellent!

[@PerisModels]

Martin Swanson I would like to see it finished it 🤙🏻🤙🏻🤙🏻

[@mustangbob51]

i also have the same kit. very nicely molded. Peri, how long does it take for you to build one of these type kits on average?

[@PerisModels]

mustangbob51 cheers Usually 4-5 weekends

[@iryairya2008]

With this kind of video, you should have 100k or more subs and 100k views per video. It is very well presented, and I absolutely fall in love with this kind of presentation. Keep going and keep improving. Jesus bless!

[@PerisModels]

Thank you so much my friend 👍🏻

[@thegaper1090]

Just came across your channel and subscribed. I’m very impressed with your skill.

[@PerisModels]

Thank you

[@la_trastienda]

Great build!! Thanks for sharing

[@PerisModels]

Thanks

[@georgetsintamidis2224]

Απλά η τέλεια δουλειά.Εξαιρετικό

[@Motorwinter]

I LOVE these Videos, no talkin, just doin. Beautiful.

[@PerisModels]

Motorwinter thank you sir 😊

[@-sailboatmodel]

Great job. Good video. Beautiful model. Thank!

[@PerisModels]

Thank you 😁👍🏻

[@rodschmidt3498]

Beautifully done! I just discovered your channel and couldn't hit subscribe fast enough.

[@PerisModels]

Thanks Rob Hope you enjoy the rest of the videos 👍🏻👍🏻👍🏻

[@Ghostrider-71]

Excellent job. Your weathering is impeccable. Very difficult to capture on a solid dark paint scheme. Very nice. 👍🏼

[@PerisModels]

Thank you very much 👍🏻

[@markrayton6385]

WOW !!! Peri your models are absolutely fantastic and your video's and tips are excellent. Keep up the good work and thanks for sharing. I have subscribed.

[@PerisModels]

Thanks mark 😁😁😁

[@markrayton6385]

You are welcome 👍🏻

[@raytheron]

Another superb build! Great job!

[@PerisModels]

Thank you my friend 🤙🏻🤙🏻🤙🏻

[@steliospratsi9047]

οπως παντα εξαιρετικη δουλεια.

[@PerisModels]

Στέλιο σε ευχαριστώ 👍🏻

[@MrMoosModels]

Amazing work on your Mudhen! I like the blending techniques you use with the oils during weathering.

[@PerisModels]

thank you for your kind words

[@formalpuma9157]

Where did you get the ladder? I’ve been looking everywhere but no luck

[@PerisModels]

Spare one mate

[@raptor1550]

Awesome you even put the tiny mirrors on the canopi... Impressive :)

[@PerisModels]

Thanks 👍🏻

[@neffex1116]

man that look so sick and so cool then jet F 15 strike eagle i the best

[@PerisModels]

Thank you

[@glynchivers9519]

Great build once again, cant wait for the next one.

[@PerisModels]

thank you so much :)

[@Hobbymanworks]

Great work, Thank you Sir

[@Adamslee72]

Awesome job Peri fantastic result stunning finish cheers 👍🏻🍺🍻

[@PerisModels]

Faron Adams cheers bud 🤙🏻🤙🏻🤙🏻

[@nigelstudio1942]

Woah! This is so epic! Im inspired by you that when i grow up ill make this too.

[@PerisModels]

Cheers

[@mr.modern4419]

Fantastic build. Again, just enough weathering to make it look real without making it look "worked up". Not a complaint but an observation, I hate that the clear decal film can still be seen even after varnishing. Still a 5 star build. Love your videos too.

[@PerisModels]

mr.modern44 thank you The hasegawa decals were very very thick unfortunately

[@icervoid]

Perfect, Beautiful, bla bla. THIS IS BREATHTAKING. I wish more time for my projects but i do not have.

[@PerisModels]

Thank you

[@henrysanchez4810]

That Hasegawa kit comes together a lot like my Revell kit it I built over 20 years ago, I'm currently re-doing it new paint and decals.

[@jackveneto420yearsago7]

The oregon modle

[@henrysanchez4810]

@@jackveneto420yearsago7 Seymour Johnson.

[@danielskomorovsky]

please do more full video builds!

[@PerisModels]

Thank you. Currently I am doing step by step and at the end I will make full

[@wadestipp1833]

Working on the same kit right now and I was surprised at the fitment issues. My last kit was the 1/32 Tamiya F-4 and there were no issues there. For this kit I'm finding that I'm having to to do more filling and sanding than I was expecting. Hopefully it will not affect the paint.

[@PerisModels]

I am surprised as I didn't have many issue You need to dry fit and try ans eliminate any issues before you glue the parts

[@aigarslindentals8315]

Superwork!

[@darkscorpion6534]

This is absolutely amazing work.... Well done.

[@PerisModels]

Thank you 👍🏻

[@mikeglenn1000]

Hi Peri. You have an incredible talent, my friend! I enjoy your builds!

[@PerisModels]

Thank you so much 😁😁😁

[@josealejandroalvaradobotei8584]

Excelente vídeo saludos desde Chile a mi también me encanta los aviones y él aeromodelismo gran trabajo 👍👍👍

[@PerisModels]

Gracias 🙂🙂🙂

[@bshupejr]

Excellent work, thank you for the video. What is the lump of putty in the fuselage for?

[@PerisModels]

Thank you Which part of the video shows the putty?

[@shane5692]

@@PerisModels 5:22. I am wondering why too. Extra ballast?

[@PerisModels]

@@shane5692 yes you are correct To avoid a tail seater

[@oliviergambaro3876]

Another great built.

[@PerisModels]

Olivier Gambaro cheers 😊🤙🏻

[@lazaroslazarou9123]

hey! great job!!! 2 questions, in 4:30 only sanding? no putty? 17:54 paper with white spirit?

[@leighnoe4814]

I like watching people build models

[@PerisModels]

Me too 🤗

[@ozjedi1]

I have the F-15 E Seymore Johnson kit from Hasegawa has been sitting around for years been wanting to get an update cockpit set and PE set if available which is why it hasn't been built yet

[@PerisModels]

Great kit

[@Headmod]

The Eagle is ready to Strike ! Nice one.

[@PerisModels]

Headmod thank you 🤙🏻

[@allgood6760]

Nice!.. I have a Hasegawa 1/72 F15.. 👍

[@PerisModels]

Thank you

[@MottysMilitaryModels]

Fantastic stuff matey !! I've just got myself an F-15c it's the tamiya one but it will do !! Lol hope your well and your family

[@PerisModels]

Thanks Steve 👍🏻👍🏻👍🏻

[@brettlloyd4446]

Nice model of a great american fighter jet, one of my neighbors on my street used to work on f15s in the USAF back in the 1980s

[@PerisModels]

Brett Lloyd thank you 😊

[@ashby1672]

it must have been a very tough work (this kit is quite old as far as i know). Great job!

[@PerisModels]

Leo Y thank you It's not as bad as you might think 🤙🏻🤙🏻🤙🏻

[@jcsandygobotobkkbo2192]

Most beautiful plane ever!!!!!!

[@PerisModels]

👍🏻👍🏻👍🏻

[@AirbrusherStudio]

Super work !

[@PerisModels]

Thank you very much 👍🏻

[@joemd7775]

What a beautiful build! What type of tool did you use to re-scribe the panel lines?

[@PerisModels]

Thank you I have a trumpeter scriber and tamiya scriber

[@kriscotant2213]

I'm just getting into using an air brush. When you are putting all of those layers of paint and thinners etc, do you have some type of ventilation or do you just wear a mask? I would be doing this in a room in my home and I just don't know what kind of fumes these sprayers can put out? Any info/help would be greatly appreciated. Thanks, the "Mud Eagle" was beautiful!!

[@PerisModels]

Hi there I am using a spray booth and a mask

[@stuartbremner9680]

Stunning build 👍

[@The_Aviator_Railfan]

Ok so I recently found the action airbrushes online but idk which one has good reviews. Can you send me a link to the one you have?

[@PerisModels]

Have you ever used one before? If not i would start with any double action airbrush around the £20-£30 so as to get a feel for it If you are experienced I would search for harder & steenbeck infinity 2 in 1

[@lasercreation-world1981]

very very nice. I'm excited, you make great videos

[@PerisModels]

Laser Creation-World thank you my friend 🤙🏻

[@thanhquannguyen9624]

Awesome ! Thanks.

[@PerisModels]

Cheers 😁👍🏻

[@dfplasticmodelsdidier3117]

Very nice job ! I'm waiting for the sufa

[@PerisModels]

Didier Fellous putting the decals 😁

[@robertg.fullarton4520]

Thanks for the link to this in SMCG. Very well done video, and great work on the F-15. What photo etch set did you use for this build?

[@PerisModels]

Robert G. Fullarton thank you my friend I used Eduard zoom set

[@chandrachurniyogi8394]

Is the F-15 Strike Eagle available in 1/32 scale & 1/24 scale with full functionality??? for e.g. retractable landing gear, opening pilot's canopy, movable flaps, ailerons & rudder on vertical stabilizer!!!

[@PerisModels]

I dont know

[@hetznaz7902]

Good question for Google my friend

[@simonwillis1529]

Great vid the gloss coat do you have to make it or can you get a spray can and the dull coat after decals

[@PerisModels]

You can get sprey cans for gloss and will coat but I have never used them. Always use Tamiya x-22 and x-86 with an airbrush

[@simonwillis1529]

Do know of any spray cans I’m looking for and also a dull coat once the kit is finished I’m doing as much research as I can before I start and you are very helpful

[@self401]

Man you are extremely good at painting and building. If I lived anywhere close to you I would pay you to build me an f-15e strike eagle like this. The f-15 is my most favorite fighter of all time. I have 3 hobby master models of the f-15 but I would love to own this one you just built. I mean wow. Like WOW!!!!!!

[@PerisModels]

Thank you All these models have already been sold and shipped to Europe If you want I can build and ship it to you

[@felix8758]

Great work👍

[@PerisModels]

Thank you 👍🏻

[@aigarslindentals8315]

WOW! Masterclass!

[@PerisModels]

Cheers 🤙🏻

[@creativecraft100]

Nice job 👍

[@PerisModels]

Thank you

[@munchkinmodelingman72GAM2]

nice...got one on my shelf I need to build.

[@PerisModels]

munchkin modeling man 72 🤙🏻🤙🏻🤙🏻

[@zackchen12]

What a masterpiece. Thanks.:D

[@PerisModels]

Zack Chen thank you 😊

[@gerardodelacruzortiz6153]

Great job

[@PerisModels]

Thank you

[@stephanemaniez1850]

et un abonné de plus...un....nice job!!!

[@PerisModels]

thank you so much

[@ZestyBagel26]

what did you use to ad the hydraulic leaks

[@PerisModels]

Oil paints

[@ZestyBagel26]

@@PerisModels thank you

[@lxbyest934]

Literally, perfect!

[@PerisModels]

Thank you

[@ATrainGames]

I have a question for you, Peri... I'm noticing (at least in this build) that when you remove parts from the trees you snip farther from the part, then go back and snip closer to the part, then file down any burrs. Is there a reason for this additional step in your process? Thanks!

[@PerisModels]

A-Train yes my friend Some times the plastic is very fragile and by leaving a small part with the first cut you reduce the risk for breaking the part

[@ATrainGames]

Great tip! Thanks. :)

[@antonincz9677]

Very Very nice

[@PerisModels]

Thank you 👍🏻

[@quantumeffect9739]

Awesome build! What Airbrush do you use? I find my self in need of a new one

[@PerisModels]

Quantum Effect thank you my friend I am using a harder and steenbeck infinity

[@mustangbob51]

i also have the same kit. very nicely molded. Peri, how long does it take for you to build one of these type kits on average?

[@PerisModels]

mustangbob51 thank you my friend Usually 4-5 weekends

[@mustangbob51]

thank you for the reply. i do enjoy your videos and i really appreciate your approach to detailing and the subtle manner that you do it.

[@creativecraft100]

What is the needle sizes for the black lines??

[@PerisModels]

0.2mm

[@TheWheels1965]

Hi, can you use a sharpie pen for the panel lines before the main coat of paint!

[@PerisModels]

Yes you can but you need to be careful what paints you will use later as it might react

[@impooser]

Excellent really pro

[@PerisModels]

Thank you very much 👍🏻😁

[@impooser]

​@@PerisModels Thanks for your reply. I have a little question. What is the purpose of pre-shading at 12:04? I see some modelers doing so, but in the end you are re-applying the base coat over it, which will make your pre-shading fade. What is the difference between pre-shading and washing your model? Could you enlighten me about these steps? I don't understand the difference. Thanks!

[@PerisModels]

@@impooser hi there With pre shading you are trying to enhance the color shade difference between panels and panel lines. Usually the area around the panel lines looks darker than the centre of a panel. You either do that or you spray with a lighter tone the centre of the panel. It's a step that allows you to have tonal variations. Wash is used to enhance the actual panel lines. Hope it makes sense 👍🏻😁

[@impooser]

@@PerisModels Thanks for your answer! Yes, makes sense! Alright, I will try to apply this technique on my (hopefully) future aircraft models! Cheers!

[@kamen25]

great video! i'm just starting to get interested in putting models together, so if you'd humor me, what's the putty for at @5:23? is it so the pieces don't shift around?

[@PerisModels]

It is just air dry clay for extra weight so I don't have a tail sitter

[@pcos8337]

Masterful

[@PerisModels]

Thank you 👍🏻

[@androoooo_oooo]

What did you use to make the leaks

[@PerisModels]

Oil paints

[@MrKrc2002]

Nice work

[@PerisModels]

Kelly Cottle thank you 👍🏻

[@T-N-TRacing]

This is amazing. How long did it take you from start to finish? I'd enjoy seeing you build a Raptor.

[@PerisModels]

Tyler Bowers thank you 😊 This model took me about 4 weekends as I only model Friday and Saturday

[@ruimachado2358]

Magnificent

[@PerisModels]

Thank you

[@Thetreefella]

What kind of glue are you using?(i assume thats glue the geeen lid with the brish)

[@PerisModels]

Tamiya extra thin

[@Thetreefella]

Thank you.

[@sniperrana]

which compressor you use for airbrush?

[@PerisModels]

It's a Sparmax with a holding tank

[@kevinm3751]

I noticed your Tamiya grey putty looks dried out compared to how mine looks. What type are you using?

[@PerisModels]

Kevin Morrison it is the standard grey putty Probably I let it dry a bit before I apply 🤙🏻

[@kevinm3751]

Thanks...

[@kannagi5070]

How did you control your hand so well while pre-shading? I find it so hard to draw the perfect line and sometimes ruin the whole painting :(

[@PerisModels]

Nothing at all my friend Some times I support it with my other hand...

[@Miguel-re2hv]

Please, show in next vid how to paint weapons. Thank you

[@PerisModels]

I will my friend

[@alexanderleslie3899]

Nice model

[@PerisModels]

Thank you 👍🏻

[@alexanderleslie3899]

Your welcome

[@hathaway3979]

beautiful!

[@PerisModels]

Thank you 👍🏻

[@hathaway3979]

you're welcome. I've built this kit before. this video gives a better insight for me for building it.

[@22Flaubert]

Poderia melhorar as músicas de fund Belo modelo e trabalho

[@PerisModels]

Thanks

[@krugmeister7301]

AWESOME Job...I have A Strike Eagle from AIRFIX...1/72 Scale....Not as good as The HASEGAWA kit..

[@PerisModels]

Thank you

[@irangoytia9012]

NICE MODEL EXCELENT...

[@PerisModels]

Thank you 👍🏻

mig 27 favorite

[@scottk9806]

Is this just a revised academy model or Vice a versa because this goes together and looks exactly like my academy kit I’m working on

[@PerisModels]

Hi! No this is a hasegawa model. Nothing to do with Academy i am afraid

[@Karakulimbro]

Music for the funeral

[@PerisModels]

I as I said before Cannot please everyone You can mute the music

[@plasticarmor4646]

Awesome

[@PerisModels]

Plastic Armor thanks 🤙🏻🤙🏻🤙🏻

[@AdrianN.88]

I'm surprised you put a matt coating OVER the polished aluminum!? it will become gray, not shiny metal?

[@PerisModels]

I am avoiding as much as i can to sorry over the metallic areas so they are still shiny

[@ВиталийЛевченко-з2м]

Класс!!!

[@valsimotdesign]

hello. Your work is awesome,....Can you sent me some videos to download just to show my father in law:)?? He is a senior model builder, for over a 40 years, but an old school method,.only paint brush :)Thank you

[@PerisModels]

The videos are too long and big in size Better show him the channel

[@hetznaz7902]

You can also do a KZbin to mp4 conversion and download them there

[@shots_cycling]

Position to attach the ladder is different.

[@PerisModels]

Where it suppose to go?

[@shots_cycling]

Peri's Models Attach it on a black vertical line.

[@PerisModels]

@@shots_cycling got u It is temporarily put on