Full video - cold start 3B diesel and shutter install.

Working on the front end a bit and wanted to get this baby fired up. It’s been almost 2 years without a start up.
Changed all the fluids and filters, connected all the electrical, primed and started it up.
Some of the products and tools I used on my build;
Oil pump/syringe: amzn.to/3XbU5J3
Seam sealer: amzn.to/3G6WVIv
Electric DA: amzn.to/3cvbaMk
Durablock set: amzn.to/3PE4SrK
320# sticky back amzn.to/3SVPtp3
80# sticky back sand paper: amzn.to/3OpVKGs
Stripping wheel: amzn.to/3PA6kvl
40 grit flap disks amzn.to/3L4bEod
Wire wheel set: amzn.to/3PdomnX
POR15: amzn.to/3lPX35o
POR15 Metal Prep: amzn.to/3HhhMJh
POR15 rubberized undercoating: amzn.to/39T1WrL
Eastwood internal coating: amzn.to/3t1xGS9
WEN mini belt sander: amzn.to/3MguHwP
Belt sanding belts: amzn.to/37Lvo2k
Spot weld cutter: amzn.to/3kM91wg
Replacement bits: amzn.to/3scUeiv
Drill bit 1/8: amzn.to/37Zhqdj
Step drill kit: amzn.to/3MRxMU1
Spot weld clamp: amzn.to/3kIkZHj
C clamp: amzn.to/3OXW9kL
Flux core wire .03: amzn.to/3KLk43t
Welding gloves: amzn.to/3MNHqac
Dewalt drill: amzn.to/3KKxqgu
Butt weld clamp: amzn.to/38Skhoi
Cut off wheels: amzn.to/3sz89Q1
#coldstart
#diesel
#dieselstartup
#bj60
#60series
#fj60
#hj60
#fj62
#toyotalandcruiser
#landcruiser
#bj60shutter

[@DuncanMargetts]

Looking so good. A new primer pump to fix that leaking one is pretty cheap. A Bosch unit is the best choice. Engine is sounding great (what I can hear of it through the background music at least)..

[@Missedmyride]

Good eye. It’s actually not leaking thou. Some of the diesel just spilt down when I primed.