Fully Built/big turbo Camry Sounds So good!!!!! (Turbo 2az-fe sounds amazing!!!)

[@Zosh]

LETS GO!!!!

[@ShaneVlogss]

YESSSSSSIRRR!!!

[@noneapplied8204]

@@ShaneVlogss yoooo youre in boca? Im in boynton id love to see this camry of yours bro I just got one with low miles

[@westcoast6860]

Toyota Camry your car is super clean bro I like the upgrade you did on it 🚘⛽️🚧💪👍🚦🛑

[@mariomccarthy5795]

Ain’t no way boy

[@shanegaming2446]

@@ShaneVlogss hi

[@Autogera]

It almost sounds like a Subi, and it’s got turbo sounds. Can’t wait to see the car at it’s full potential with the tune!

[@ShaneVlogss]

yeah it sounds super close to a subi and i really cant wait as well for the tune and what numbers imma make

[@usernamenotavalible9032]

My old rav4 2.0 (no resonator)sounded abselutely identical to a subie

[@absolutegaming5412]

@@usernamenotavalible9032 I would love to see, I currently have a 1az fe, what did you do just resonator delete?

[@usernamenotavalible9032]

@@absolutegaming5412 it was basically straight piped from the cat back. I forget what engine it was, but, it did come manual which made it all the more satisfying to listen to.

[@dragonxg6]

If a Toyota Camry pass me and I hear turbo spool and then a blow off valve I would make sure to make friends with that person😂

[@ShaneVlogss]

😂😂🙏🏾

[@evankennedytv1511]

I have an 06 4 cylinder Camry and this is exactly how I want mine to be

[@tommypickles3544]

Same

[@poiuytrpoiuytr4856]

You ever got it done?

[@robbie1606]

Where u buy the ground kit for ur camry?

[@tinuthomas531]

Yes finally I’ve been waiting!! Goddamn that sounds amazing. Who would’ve thought a Camry would be making all those sounds. Beautiful build.

[@ShaneVlogss]

Thanks man 😭🙏🏾yeah i really love how it’s coming out so far

[@GabrielDunkin]

Proud of you my son🥺

[@Mataco717]

YOOO!! THERE IT IS!!! What’s crazy is that it almost has this subie rumble sound to it. It’s not quite a Subaru sound, but it has rumble, and the Wuhan War Whistle and sneezes.😩 It sounds SO GOOD. CANT WAIT to see what it makes as far as power and what it sounds like fully opened up and running right. KEEP IT COMING MY G!!!🤙🏼👌🏼

[@ShaneVlogss]

Yes sir thank you 🙏🏾🙏🏾🙏🏾 yeah i can’t wait to get it tuned and finally open it up and see how much power it can put down

[@totallystock7779]

I agree with the similar sound to a subie

[@tommypickles3544]

I got a 06 Camry. Le. In-line 4 U just got a new sub Once I get my bread up. Turbo on the wayyyyyyyyyyyyyy🔮💯

[@hannahsmith2322]

Just bought my 2007 camry and I’m looking to do some stuff to it I can’t waitttt.

[@ShaneVlogss]

It’s going to be sick!!!

[@jsent825]

That was sick!! That sound drives me crazy man 😂 I've been dying to turbo a car this past few months and have been researching how to but the fact that I have never done this before and I admit i'm not a professional but if you love it why not 😅. Hopefully you can help me with my future own build bro and congratulations for the car really amazing ✌

[@ShaneVlogss]

Thanks man🤘🏾i really appreciate it , and yes it’s soo fun and rewarding having a turbo Camry , in if you live close by me in Florida I’d love to help!!

[@justinrichey161]

Camrys are so fun to drive, I like them better than my evo🤭

[@ShaneVlogss]

Whattt really you like them better then your evo!!!

[@tommykelley3948]

A FUCKIN CAMRY TURBO WOW, YOUR ONE OF THE FIRST TO DO IT🔥🔥🔥😁👌🏾‼️

[@absolutegaming5412]

That thing sounds like a Subie, specially on shifts crazy stuff man!!!🔥

[@f80_dann]

Seeing this inspire me to put a turbo on my 2019 Camry. I’m just having trouble looking for one atm. Thank you 🙏

[@ShaneVlogss]

Thanks so much 🙏🏾I’m glad I’m inspired you that’s so dope

[@txtchjmb29]

I’ve got a 2019 Camry. Putting a turbo would be pretty sweet but I plan on keeping this car for over 300k miles so no to a turbo as that would wear the engine out faster.

[@WaynePeeples]

Definitely been long I done sold my 03 Camry...bought a 19 XSE Camry had it bout 8 months since the last time I saw ya lol

[@ShaneVlogss]

Wooo that’s great l, i love the xse Camrys i would get it if i could afford it 😭😭 but yeah it’s been long

[@user-ih9lc6sx9l]

Yo this is sick, I’m getting an 04 4 cylinder soon. Your giving me ideas 😂

[@ShaneVlogss]

Ayeee that’s perfect that’s Why I’m making these videos 💪🏾

[@kokobeatz7222]

Make sure the engine doesn’t burn oil. Notorious for having crappy piston rings.

[@jaydaniels88]

@@kokobeatz7222 and what if it does burns oil? What needs to be done? I have a 2007 4cyl 🤔

[@urbangangsta]

James Daniels new piston rings....

[@4touchdowns1game29]

@@urbangangsta honestly if you're going to put a new piston rings that you might as well put a new pistons and rods.

[@btchhopperou812]

Looks like you live in South Florida too! Awesome that someone around here has done up a Camry I4. I been wanting to throw one on our '14 Camry, only ours in an Automatic(which worries me a little putting it under a shitton of torque). I don't want it loud or poppin'... I wanna keep it sleepy- VERY sleepy! Anyhow, VERY fucking cool ride! Definitely will check out upcoming and old vids as well as sub- Thanks for the tour, peace Oh, BTW, it DOES sound tight as hell other than the exhaust chattering, but when you get on it a little you can tell it will be pretty damn quick once you get that tune dialed in, alright, later!

[@ShaneVlogss]

Thanks. So much 🙏🏾

[@BG-360]

gonna be inheriting my dad's 05 camry pretty soon, I just wanna know how to turbo it

[@longboarderebright]

Turbo slamry ftw!

[@debo9mm]

Gave me sum hope on my Camry 😭

[@ShaneVlogss]

Hell yeah!! i love to hear that 🙏🏾🤘🏾

[@sosick58]

Facts 💀💀😖

[@ramseyriggs6340]

Dame fr.... Same here.. Id do my own work tho

[@FishAdvisor]

I like the looks of it for sure. Clean sleeper for sure. I tuned several vw's over the years and they have the exhaust behind the engine and between the firewall. It's much easier to place a turbo with the exhaust up front Japan style! I'm in south fla as well so I'll keep my eyes open for that black beauty!

[@ShaneVlogss]

thanks so much !!! and where in south florida are you located ? maybe when i get the car running i can stop by !

[@FishAdvisor]

@@ShaneVlogss North Lauderdale area. East Coast

[@rocknr01la]

Brother! this is the best looking and sounding camry ive seen on the internet, mad respect for makimg such sick build. i have a 2008 v40 body also with a 2az-fe (but automatic) and ive been wondering what to do with it to make it more fun, had an idea of 1jz-swapping it, but now i know exactly what i want

[@mida8s]

i wanted to get a lexus for a vip type build but a 05-06 camry looks like the move

[@RileyTheMonster299]

You need to Actually sauter your mass air flow sensors Wires together. Those cheap connectors Are changing the resistance Through the wire. The right load isn't going through Those connectors Even if you twist the wires together And then slide the crimpers over it It will still change the load. You need to Actually sauter Those wires together Get rid of those connectors altogether and Cover the wires with heat shrink Tubing. I have a Toyota RAV4 With the same motor I am wanting to BOOST Which is how I found your video Same motors different vehicles. But I've had the same problem with the mass air flow before Turned out It was because I was twisting and crimping wires. If you can Just get a new plug for the end of your wires To replace the original one and you have to Use the wire the way you are You really need to Actually soder the wires together. Otherwise it changes the Impotence or ohm load Just enough To cause a problem It will never read right It's causing resistance in the wires. Rather you twist them together or use butt connectors It's just not a good enough connection.

[@risktak3r1994]

How am I just seeing this?! I have an 02 Camry SE 5 speed and I just have so many ideas for it. Definitely wanna track it. Such an amazing car to drive!

[@ShaneVlogss]

That’s amazing you would put a fast spooling turbo if you wanna do circuit racing 😂 it would be so much fun

[@risktak3r1994]

Yes! fun and exciting😁 looking forward to seeing your progress

[@chon4413]

Congrats bro it fkn runs!!! Sounds dope

[@ShaneVlogss]

Thanks bro 😂🙏🏾

[@penguinmaster7]

well this gives me some hope for my pile of trash

[@ShaneVlogss]

Hahah yeah man these motors are great just not a lot of people build them

[@penguinmaster7]

@@ShaneVlogss unfortunately that means build costs are way up there. no builds means no parts readily available. doesn't help that there's no aero parts to improve that hideous front end.

[@vatobryanvlogs4570]

It's definitely your starter, I had it the same problem with my Toyota Camry se v6 you could try to change it yourself it be easier than paying $400

[@ShaneVlogss]

Ahhh good i will definitely change my starter and also i think my alternator dude is blown too

[@vatobryanvlogs4570]

@@ShaneVlogss dammm I mean that's kinda expected when you have a turbo in your Camry 😂🔥good luck fixing it tho

[@TheCrummyGuitarPlayer]

That turbo is huge. I would love to see him put mustangs and challenger scat packs to shame lol

[@michaelenright6814]

I cant wait to do this to my dads rav4 hes got the 2az-fe engine

[@YutyrannusRex]

Whatuppppp!!!! Back at it!

[@ShaneVlogss]

Yes sirrrr!!!

[@LowetheTechGuy]

Now I want to turbo mine. May as well go through the engine before I reinstall it. Gotta go find the parts list now.

[@ShaneVlogss]

Haha yes that’s definitely the best thing to do , if you want i can send you a list i of the engine internals that i have done

[@LowetheTechGuy]

@@ShaneVlogss thanks man. But I'm selling it. Going to start my channel with the finishing up of it. I fired it up today with the junkyard motor. About to reinstall cv axles, touch up some dents/dings, prime bondo spots and shoot it duplicolor rattlecan silver. Then I'm picking up a 1986 300zx z31, the predecessor to my dream car a Z32. Now if I can just learn how to video/edit lol. But I still love what you're doing bro!

[@hectorbermudez2372]

Nice job bro thank you for the fun videos

[@moe1756]

which turbo kit?

[@ShaneVlogss]

this is a fully custom turbo kit that my fab guy made

[@RileyTheMonster299]

Mine does it too it's at the donut gasket exhaust probably got cocked funny now the bolts in the flange are cocked in the flange causing it to rattle because of the springs on the bolts

[@YezR909]

What turbo are you using? And what suspension?

[@ShaneVlogss]

at the time i was running a borgwarner s300sx3 62mm but as of today i have sold my borgwarner s300sxe 64 mm i was going to use. suspension im on cx racing coilovers but eventually going to switch to bc racing coils

[@BruiserBori]

Def th3 starter sounds like my solara when i needed one

[@ShaneVlogss]

Yes i am definitely going to be getting a new one when i go to rebuild it

[@swag230]

Dope videos bro!!! Keep at it😭 if I could get a turbo spool from mine I’d be the happiest kid on the planet

[@ShaneVlogss]

Thanks 💪🏾💪🏾I’ll definitely keep at it

[@afrohawk7960]

New subscriber. 2021? I like your Toyota Camry bro you did a nice job on that

[@ShaneVlogss]

Thanks 🙏🏾 welcome to my channel!!

[@afrohawk7960]

@@ShaneVlogss You’re welcome 2021?

[@rijagputra3092]

The sounds like a boxer engine, awesome!.

[@GabrielDunkin]

It does sound good tbh

[@ShaneVlogss]

Thanks bro 💪🏾

[@bradclift9419]

Sounds good dude! Can't wait to finally get my TC 2az built and slap it in my 09 vibe

[@ShaneVlogss]

That’s going to be sick!!

[@iSA-gu3yk]

Maaaaaaan you are crazy. Hi from Kazakhstan!

[@ShaneVlogss]

Hahah thanks man definitely shoutout to you 🙏🏾🙏🏾

[@spockbr18]

DAMN, that sounds amazingly fun!!! Gzzzzzzzzz

[@ShaneVlogss]

Yeah it’s very fun, soon I’m going to getting some more parts and makeing some good power

[@woopimback6990]

that actually looks hot. reminds me of a hinda sorta

[@ShaneVlogss]

Thanks 🙏🏾

[@isaiahbell8403]

I'm hella glad that I found this because I have an 06 toyota camry le and after hear one turbo'd I'm definitely going to turbo mine but its auto.

[@johng2074]

Fucking send it I’m doing the same to my car with 240k fresh rebuild

[@colslw760]

I know I've said this before but I love the build man!! Keep up the great work 👍💯

[@ShaneVlogss]

Thank you so much 🙏🏾🙏🏾

[@ralphmathews5579]

Looks good bro and sounds good for most part. Sick rims I would love a link to those.

[@ShaneVlogss]

Thanks 🙏🏾 unfortunately I do not have the link to these rims i bought them off someone a while back

[@Spacejock4]

Sounding good my man

[@ShaneVlogss]

Thanks 🙏🏾🙏🏾💪🏾

[@rookietoprobuildz]

Love seeing dope builds like this 🔥

[@ShaneVlogss]

Thanks 🙏🏾

[@oreodog]

I’m about to get an 02 camry with a rebuilt 2az-fe myself so this is some nice inspiration for sure. How reliable is it with the turbo though; I’m going for reliability over power for this car first.

[@eazymoneyemg6392]

It will definitely shorten the life of your engine without proper modifications

[@ShaneVlogss]

Sickkk , so for me because i cut corners my motor got hurt vey early in the process around 13k miles , but i know people that have there built 2azfe for over 50k miles , as long as it built well and you have a great ecu with a good tune you would be solid with reliability as long as you don’t beat on the car and jsit cruse it and do regular oil changer

[@rodneygreenwaymusic]

One neat trick I learned is having somebody cover the exhaust with something large enough and kinda going a cover up/uncover the exhaust while starting. It honestly sounds like the air/fuel ratio isn't right. It's not creating the combustion that it needs to. I'm not a crazy car guy, but I know that sound. Somebody will correct me if I'm wrong I'm sure.

[@ShaneVlogss]

Sorry for the late response, but i found out that the battery cables i used were not full copper and on top of that i didn’t have a power from the battery straight to the starter so i did get new cables and a power straight to the battery from the starter and it starts perfect now

[@fabesboard9267]

Where did you get the front bumper and how did you put it on?

[@ShaneVlogss]

the front bumper came with the car but i bought the front lip on ebay but they are verry hard to find tbh

[@lotus30388]

I wanna add a turbo to my 05 v6 Camry and customize it but idk where to start

[@ShaneVlogss]

I would say start off by building the motor first so that the pistons and rods can handle the power

[@nampam3945]

Standard original block (is this the 2AZ-FE with the oil squirters), wiseco rods, molnar pistons (why not molnar rods?), double waste gate, huge turbo (what level boost are you doing?), original radiator (seems to tolerate the extra heat), nice header (where from?), no mention of bigger head bolts, no mention of bigger injectors and fuel pump. Great sound, many will copy if you give specifications.

[@ShaneVlogss]

Yes I’m sorry i didn’t mention that , but this is the original 2azfe (from a Camry has no oil squirters) wiseco pistons, molnar rods, double tial 44 wastegates, upgraded arp head studs and main studs , yes the stock radiator does work but i have to high cam spal fans that blow a lot more air than stock fans. 550cc injectors upgraded .20 over cometic head gasket

[@nampam3945]

@@ShaneVlogss Great work, thanks for the info, I wonder how much the squirters manage to cool pistons: cant find data on that. Better fans, clever move, I was looking for a multi-row radiator but cant find one. The 0.2 over spec head gasket reduces the compression ratio, I assume, to accomodate boost. These engines seem underrated by modders, and have high HP with low weight, but there seems to be no consensus on the upper HP limit: some say 400. Lol, so many questions....its a great project. Was the tune tricky, what is the chance of detonation, what octane can you get for it.

[@thirtyonefifty3133]

Heyy what a dope camry. i hope you get the chance to get the new camry and build that one up.

[@ShaneVlogss]

🙏🏾🙏🏾🙏🏾 thanks !! Yeah i would definitely try and do the same with the new Camry if i were to get one

[@kramnull8962]

Sad thing is, many ecus use ohm's to calibrate the system, for fuel mixtures and idling vs. WOT. Those wires spliced add resistance that could be misleading the ECM from properly regulating your engine.

[@ShaneVlogss]

Yeah unfortunately that’s why I’m going to be upgradeing ecu to haltech

[@maisonmesser7856]

What was your first customization? And how much MPG you get now? I want to do this to my 06 Camry but not sure where to start.

[@ShaneVlogss]

I would start by knowing how much your willing to spend and how much power you are going for as well, the mpg i haven’t really calculated it yet but i get gas once a week just about, because i cruise most of the time.

[@derekpineiro9084]

Hey man, i have an 09’ Camry 4 cylinder, you think i could upgrade with a turbo? And if so you know of an estimated price range it could be?

[@ShaneVlogss]

Yeah you can definitely turbo it, the price depends on if you get a custom manifold /inteocoller but depending on the turbo (eBay/ or real brand turbo) will factor as well but if you do get custom manifold /intercooler i would say safly about 4500 with everything

[@TheCrummyGuitarPlayer]

So the star thing could be your air to fuel ratio. Or your fuel pump doesn't have enough power to put fuel in the engine.

[@Rich_Shifz]

Literally you can hit your starter with a pipe and that'll get the gears in there moving

[@ShaneVlogss]

I figured it out it was my battery terminator Bal they was really lose

[@justinman333]

im looking into putting a snail in my 2.4 4 cyl 2003 camry, how much for the fabicator to make that , what u were talking about at 6:35 , also how much for the whole project can i expect to pay doing the work myself ? also any tips u have regarding tuning or fitment would be very much appreciated🙏

[@torreypires6192]

Looking for a 06 or 07 camry now to start a build

[@ShaneVlogss]

Ayeee that’s dopeee lmk when you get one

[@chrissithiphong]

Hey man who did you get to do the install? I'm looking to turbo my 2ar-fe too for the heck of it. Did you get a custom exhaust too?

[@ShaneVlogss]

I had my tuner install the ecu and had the fabricator make a custom manifold and custom exhaust too

[@GIXXRBRAH750]

This was the 2.4L VVT-I 16 valve

[@ShaneVlogss]

yes this is the 4cyl 16 valve / fully built motor

[@rudyguerra2595]

I think your timing belt is lose cause it's out of alignment... check that out

[@ShaneVlogss]

yeah i think i fixed that after the video before i got tuned, im currently about to start thre process of rebuilfong / refreshing the motor!

[@dkconceptz6055]

do you have the wiring diagram and which management system you used I did the same build just need some help with the timing a tuning

[@ShaneVlogss]

no unfortunately i don't have the wiring diagram my tuner was the one that wired everything in for me

[@jeremygfoots50]

I got the V6 and i wanna do that my Brother!

[@jtsi8859]

I wonder if a similar setup can be putted on 1azfe engine

[@TheShahOf_Iran]

That’s sick

[@xv40t77]

Sounds like your having a voltage drop or something from the battery to the starter. What size wires did you use and where did you mount the battery? What are you tuning with? Are you running a clamp for the maf? I got a boosted 2011 on a aem fic with 750cc injectors at 12lbs with no issues. That’s a big ass turbo btw does it seem like it lags a lot?

[@ShaneVlogss]

thanks i really need help with this, so first off i relocated the battery to the trunk. the wires provided were 0 gauge wire for both negative and positive cables. i am tunung with the greddy e manage blue, and what do you mean by clamp? i have the maf sensor connected to the charge pipe bolted in.

[@xv40t77]

ShaneVlogs a maf clamp is a voltage clamp that limits what voltage the Ecu sees. Air flow through the stock system gives a different reading than a 2.5” smooth charge pipe so you would need to limit the voltage readings through the rpms and into boost in order for your Ecu to not try and take control of your air fuels and cause drivability and stalling issues. I believe the aem fic and haltech units are the only piggybacks with a clamp. As for the not starting I’m gonna put my money on the battery wire setup. If you measure voltage at the starter and maybe even Ecu when cranking I bet your getting a huge drop. Maybe do a video on how you set up the battery/wiring and I can check it out.

[@ShaneVlogss]

Ok thanks i will make a battery set up video on Sunday

[@ShaneVlogss]

I have to see when i get off of work today but i think i found the issue, my begitave terminal on my battery was super loose Ki can wiggle it around and take it on and off with ease , i tightened it all the way before i whent to work this morning and started my car and it stared first try, also I’m hoping that was my problem with the mass airflow sensor voltage as well

[@xv40t77]

ShaneVlogs that would be a nice easy fix.

[@AllenSpec]

Why am I just seeing this!? We need one video a week my Guy

[@ShaneVlogss]

I really need to do that but i really don’t have much left to do on my car before the tune just need to fix fuel rail and solder wires and that’s it

[@johnnyvasquez8724]

I wanna turbo my 04 camry le but I don’t know where to get the parts and stuff

[@ShaneVlogss]

What’s up, i will be making a parts list video soon and i will have all the information you need to know with links and everything

[@stanwardoshiro]

Amazing build!

[@anthonystorres1313]

What kind of exhaust are you running? I have a 2AZ-FE with a turbo, the turbo flutter sounds almost exactly like this but I have a stock brz exhaust and honestly I can only hear the motor and can’t really hear anything from the exhaust, I checked for an exhaust leak and everything seems fine, so I’m thinking of getting a catback exhaust and maybe removing the catalytic converter to make it louder

[@ShaneVlogss]

I was running a straight pipe straight from the turbo

[@joshjanzen9196]

Just got the TRD, I hope a turbo becomes available for it soon!

[@ShaneVlogss]

Nice man are you talking about the 2018 Camry ?? That would be sick if they have a kit for one of these

[@joshjanzen9196]

@@ShaneVlogss nah I am talking about the 2020 Camry TRD

[@joshjanzen9196]

I got the supersonic red and black I like it quite a bit.

[@YeldosAlgabayev]

bro its fire what kind of wheels it is

[@ShaneVlogss]

Thanks 🙏🏾 they are called enza vatore , idk if they still being sold any more i did switch wheels tho

[@lucasb_7573]

Did you roll the fenders to get that fitment in the back?

[@ShaneVlogss]

Yes i did roll the back fenders only

[@lucasb_7573]

Okay thanks, I lowered mine a couple of months ago and I'm really trying to get that camber out of the back without raising it. What did you use to get that lip down on them

[@lucasb_7573]

@@ShaneVlogssi tried a heat gun and a fender roller but it didn't really do anything for the lip I'm wondering if I'll just have to hammer at it or something 😂

[@bencarter2620]

I got a 05,I need my engine to b like that

[@ShaneVlogss]

Yessir 🙏🏾🙏🏾

[@lahj627]

It could be the fuel pump it could be spark plugs or timing belt

[@ShaneVlogss]

I fixed it , when i did my battery relocation i didn’t have. A paper straight to battery so i bought i cable for that and i fixed it

[@gasscooterdude]

The "02+ Camrys with the 2.4 four cylinders have timing chains 👌

[@R3Elijah]

Where did you get youre turbo? been thinking to turbo mine ina month or so.

[@ShaneVlogss]

You can get the turbo form agpturbo.com , or on k series peers .com

[@jaydaniels88]

I have a 2007 toyota camry SE 4 cyl with just a Muffler Delete.. What else should i add or take away to make it somewhat a resemblance of your car sound and speed wise?

[@ShaneVlogss]

You will need to delete the resonator as well the make it similar to mine

[@jaydaniels88]

@@ShaneVlogss got ya, appreciate it bro, just installed a K&n Air filter as well and thinking about putting a new catback exhaust system as well as a new header that's California approved

[@ShaneVlogss]

Hell yeah that sounds great , and are there any California approved ones?

[@jaydaniels88]

@@ShaneVlogss yea I found one on part geeks

[@rajshan4921]

TD04 turbo would-be fit nicely bro.. your is huge turbo.. awesome job..

[@ShaneVlogss]

Thanks 🙏🏾, yeah i wanted to get something decent size and this guy helped me get the parts and picked the turbo for me

[@randomnessnonsense640]

Ours sounds kind of similar except the turbo obviously but what engine do you have in it

[@randomnessnonsense640]

We've got the same motor omgggggg I'm def turboing my yota

[@ShaneVlogss]

Yeah sound be the same motor , but yes this car is so great to drive once it’s turbo!

[@ramyeez7046]

do you think you could boost the 2az fe stock? or should you build the engine?

[@ShaneVlogss]

You can but i suggest you upgrade the engine for sure

[@ramyeez7046]

@@ShaneVlogss thanks.

[@BovineIntervention]

​@@ramyeez7046bro if you tried that you'd blow your shit up. Adding boost goes hand in and with upgrading the engine because it's not built to handle it.

[@ramyeez7046]

@@BovineIntervention i ended up getting an EK civic lol.

[@ramyeez7046]

@@ShaneVlogss i ended up getting an EK civic lol.

[@Rman2112]

Can we get a list of all the aftermarket parts you used like the front lip rims and exhaust possibly??

[@ShaneVlogss]

Yes definitely will have a video out soon

[@PrinceSmokey401]

What tunning chip did you use or did you tune the regular computer

[@ShaneVlogss]

I have a stock ecu, but i also have a piggyback ecu wired into the car too help with the tuning , i highly suggest getting a stand-alone ecu for this build it will help with working out alll the bugs, because with the piggy back systems i am always having trouble

[@THE_REALnDEAL]

the turbo is facing the wrong way and i'm concern how dose the air even blow in

[@WaynePeeples]

Sounds dam good

[@vusterv5680]

What kind of headlights are those? I want the same one like yours??

[@ShaneVlogss]

These are the 2006 Camry black housing headlights

[@Retail2retire]

Dude that spool!!

[@chadnorton3373]

One click is a starter that's a battery or fuel issue

[@muramasa870]

Damn kinda want to turbo my 2.5 2013 camry xv50 US/UAE now... But I fear my transmission can't handle it

[@ShaneVlogss]

I’m not sure if the auto trans can hold that much power

[@zoltvivid-yt8574]

Bro thoes wheels where did you get them! I need some on my Camry

[@ShaneVlogss]

My bad , i don’t have them anymore and i bought them off someone years ago so i don’t have a link to them at all

[@kaviewin9190]

Finally uploading xD.

[@ShaneVlogss]

yess sir!!!

[@RileyTheMonster299]

What all have you done to your internals In the engine. I know bone stock It says not to put more than 8 to 10 psi maximum If you actually want the motor to last any amount of time. I was just wondering if you have Done anything like forged internals? Never mind just answered my question I didn't hear what you said about your internals I went back and listened. But as far as your mass hair flew You really need To Sautter those wires together. Or find a whole new plug that you can run your wires directly into so there is no Crimp or twist connections In line. How Much boost do you think you'll be able to Throw at the motor with what you've done

[@ShaneVlogss]

Dope so yeah when i rebuild the motor i am going to be soldering he cables for sure for the mass airflow sensor , and i threw 23 psi of boost easily before i took it apart.

[@RileyTheMonster299]

@ShaneVlogs Hell ya! I heard you could take it she just couldn't take it for very long. I'm rolling the rav4 with locking differentials. So my lunch should be outstanding At about 45 miles an hour It will Unlock the differential Automatically Switch to front wheel drive only. So it should launch like a bat out of hell.. I don't know I'm still looking into a lot of it But it's definitely going to happen.

[@markwilding5108]

MAF needs to be in front of the turbo inlet

[@ShaneVlogss]

I was there i had to extend the wiring but i fixed all the issues that you see in this video lol

[@erickbajamundi9945]

What are coolant temps? That heat soak from turbo placement must be insane

[@ShaneVlogss]

the coolant tempts are actually running cooler because i have a mishimoto thermostat that opens up cooler than stock , also u have upgraded spal fans that blow twice as much cfm as the stock fans so everything runs cool for sure, and then on top of that i have a large 3 inch intercooler as well that helps the charged air to be cool as well

[@thebncustom]

Bro subbed u Love from Pakistan 🇵🇰

[@ShaneVlogss]

Thanks man i really appreciate it 🙏🏾🙏🏾that’s amazing all the way from Pakistan !!!

[@thebncustom]

ShaneVlogs ✌🏽💕

[@Mario-cl1jf]

How much power your making rn? Wondering since I also have a Camry 4 cyl

[@ShaneVlogss]

I have not got my car dyno turned yet so I’m not sure how much hp i will be at, i Jane a new set up with bigger turbo and also better internals as well

[@toyotabrony]

Mario 503 it should make about 278 hp or 285 hp and 278 ibs pounds of torque. Since it’s a bolt-on turbo