FULLY Homemade JETSKI Part 6 - It's finished!

💥Use my link to install BLOODLINE for Free✅: app.adjust.com... & Get a special starter pack [Available for the next 30 days]
Part 6 of my homemade jetski, its finally done! doing some more testdrives, and finishing the last things!
plans: homemade-madne...

[@homemade_madness]

💥Use my link to install BLOODLINE for Free✅: app.adjust.com/dryq2fk_5n3ia9g & Get a special starter pack [Available for the next 30 days]

[@jackdaniels2657]

It just needs a cool rooster tail

[@Middleup999]

try to make the motorbike can be on land and in water

[@JESSE-zg2ny]

Frieslan boppe

[@ruohonleikkaaja]

I wouldn’t believe you made this alone if you didn’t vlog the process🤯 The end product looks awesome!

[@ellgaucho7332]

Atleast i see other 2 friends helping him...😂

[@DominoSixO]

Most of the people and friends nowadays, "no way you made that, I don't believe you" then you show them the videos

[@chrismarshall6082]

Incredibly impressive ! I wouldn’t have believed that someone as young could have had all those skills and determination. The steel work looks great but it would be good to add aluminum welding to your list of skills. A lot of the steel parts you made look very heavy and likely detract from the performance.

[@alvaro_builds]

You're improving so much each time. An example to follow. Keep it up man!

[@steammartian7705]

Very well done 🎉🎉🎉 the only thing is from the way I understand gel coat is. It dries from the inside out. So what u have to do is actually roll it on and cover it with plastic. I looked into doing the gel coat on my boat. It was a lot of knowledge to take in. But other than that well done. Suggest getting rid of as much steel as u can. Use stainless where u can and aluminum where u can. Keep the steel base though. That’s where u really need it. Unfortunately with boats too. Placement is key.

[@BABALOOEY46]

Just starting part6 and am binging from the intake episode… will go back and watch the hull build… I am intrigued!! Thanks 🙏 🎉

[@heinbloemert9651]

Hier heb ik echt ongelooflijk veel respect voor🙌🏼 Met zo’n kennis, discipline, en zorgvuldigheid kun je letterlijk alles maken😳

[@MostlyPosative-nj5ex]

I think adding safety redundancies in it would have been a good idea. A second bilge pump, bulkheads and a foam filled area for floatation just in case one of those hoses comes off or you hit something. That thing could take on water fast and become an anchor. Very nice work by the way. I know that I wouldn’t be able to do what you did on it. It’s absolutely incredible.

[@princepalalons8666]

you deserve way more subscribers. thank you for this series.

[@tannerwalker2735]

Looks so great. Another amazing project. Fantastic craftsman ship and engineering!

[@shakir6688]

Good job 👍 but I have some notes 1 safety Kay ! 2 I think there’s extra weight. You use a lot of steel 3 if you find someway to remove transmission that be petter 4 should you remove transfer belt and find someway to contact crankshaft directly with jet Finely you will done .. all the best

[@wiktorstrupinski6588]

this is nederlands! ik woon in nederland twee jaren nu, i love this country!!! soo good here, great build young man!!!!

[@footstepanglertv]

Your invented was good for my daily fishing activity bro😂👌

[@johnholmes6897]

You teach a young man how to fish/ hunt or build things Rarely will you fund them in trouble with the law. They're too busy having legal fun. This dude is an inspiration to his generation.

[@Koolteer]

Prachtig geslaagd project! Nog wel een tip, zorg voor een registratienummer (en vaarbewijs?). En de snelheiddsboetes op het water kunnen ook erg kostbaar zijn....

[@ratmanmurray7137]

What an awesome job! Well done... Perhaps put a water flap/door on the exhaust outlet so water can't get forced up the exhaust when you stop or you do a 360 and stop. Just a simple gravity flap would work. How is it holding up? Any update? I am watching in march 2024. Greetings from Australia

[@nicgurkweitz389]

So I know you put the wire mesh in there as a vent but my advice it to make a vent cover to prevent water coming in, you do that by making the exhaust of the vent cover pointing down towards your feet in kinda an L shape, so it's venting downwards which will help keep water out of the inside as you take on water from the front.

[@TheStyx91]

Prachtig, alsof tie uit de fabriek komt! Ik twijfel alleen wel of er genoeg aanvoer is van lucht. Heel veel plezier en kijk uit voor de waterpolitie!

[@ChrisKTMKurtz]

Very nice, while many American young men are running around confused about what gender they are and what bathroom to use Europeans are building they're own jetski's from scratch and learning new trades self taught. KUDOS!!!!! young man, well done. I could watch and learn from your video's all day long.

[@badijks]

It is a awesome build and also the paintjob and detailing is very nice👍🏻 I think you need maybe a drillpress or a milling machine maybe a idea for a next project

[@ronecisilva4143]

Very good!!! Congratulations!

[@jasonbouwland9384]

Man. Geweldig echt love the diy projectjes. Zelf ook bezig met een project. Al zij het een auto . Maar dit gezien te hebben lijed en subscribed heeft me een boost gegeven draad weer op te pakken.

[@ZwervenmetJuKi]

Volgens mij heb ik je pas nog in Leeuwarden zien varen/vliegen op het water, super mooi geworden👍😊

[@SneakZ88]

great job sounds awesome look forward to seen it on the water again

[@lookronjon]

Cool boat but I see so many potential problems. The “rack on the back of the seat is a problem. It’s something to snag on. The handles seem upside down. The reverse pull is where you can hurt yourself and it’s in the way. It should be a lever on the side where you cant hit it. Foot rests so you can stop yourself from sliding forward and being on the bars. The hull to deck fittings should be every 8”. At least 8mm. The seat should have a latch in the back. Some eyelets to tie to. Grab handle on transom. Pull eye on bow. So many things. You have many points of failure. Don’t go out far or alone. It’s neat but keep making it better. A big fishing platform with a roof and a drive unit would be so much cooler and productive. Another thing is the weight. The trim is off. Trim tabs would help.

[@ericboissonnade5597]

Waouuuh, c’est impressionnant! Bravo pour tout le travail. C’est magnifique. Tu dois être super content. Felcitation.🙌🙌🙌

[@P3surf1]

Great job. I’m thinking you might not have enough external air intake vents? Low air can cause more smoke. You want that top speed right? also since your fuel tank vent is in the engine room. Please add a marine grade vent fan. And absolutely need a bilge pumps. I’d hate to watch this project go under water. Fantastic work.

[@stevestogsdill5791]

Phenomenal work! Congratulations.

[@darktdi85]

Biggest respect for this great job! You are verry high skilled. And nice supermotard bro🤙🏻

[@DurzoBlint178]

This guy is the living embodiment of *fine, i'll do it myself* 🫡

[@homemade_madness]

🫡🫡

[@KewinWerkPoland]

Great WORK !!!

[@nickifiedperformance5891]

Amazing job!

[@herisumartono2422]

*"AMAZING.......!!"* 👍👍👍👍👍

[@benschlack5814]

That's pretty sick👍👍

[@jompisv8]

Awsome work,you impress me once again,love your chanal😀

[@sail4life]

Congratulations! Awesome job!

[@actionpack6125]

Love it

[@aarem01]

Mooi werk!!!!

[@J.J.CerpaG]

Espetacular!!!

[@georgearthur2043]

Fail safe engine cut off is important....nice work

[@richardstone4196]

Moet je zoiets nog ergens laten keuren en hoe moet je dit verzekeren?? Gaaf project trouwens!

[@孙良-w7m]

Is it long with synchronization?

[@oreste1967]

very good projet.

[@eujayhernandez9751]

You're awesome, how could I get a plan like you have? It's more detailed than I have, please can you send a link or website or if that your own design can I buy the plan?

[@elviscadagan2328]

make an amphibious JETSKI project

[@lionelmerle6024]

Hello According to the noise, I think your engine is running on only 3 cylinders 😅 Lionel

[@marottomarotto5621]

Belo trabalho parabéns 👏👏👏👏💯

[@elisayudistira8108]

Is the best

[@havasss]

a real influencer

[@martincstee5335]

How do you shift gear?

[@dfn808]

Looks absolutely awesome, well done!

[@stomptheelites]

🔥🔥

[@AlpSlm]

any engine overheating problems?

can't you give plans for free?

[@SalvadorGarciaG]

👏👏👏👏👏

[@raivomiilits6220]

Väga ilus tuli,Eesti lipu värvid ,Sini Must,Valge.🇪🇪🇪🇪

[@thomashoekstra3037]

Hoe ga je schakelen?

[@hubifan5711]

👍👍👍👍👍

[@bigdadgigachad3042]

You may want to add a fan to blow fumes from inside out the vent. Very cheap and will save from it turning into a bomb and you getting hurt. Super cool build 👏🏻👏🏻👏🏻

[@ivan10845]

Great! I was just about to ask about this one, wasn't sure if I missed it

[@tarajones3342]

Normal jetskis don't have them or need them. If the tank is ventilated properly there's no need to vent out the hull

[@homemade_madness]

Next video: final testdrive👊🏻 what should my next project be?

[@egbertjanemmens5432]

Een vliegtuig

[@Arfabiscuit]

Something less noisy please

[@marinusadrianus2886]

Very nice project 💪🏽💪🏽 ur real handyman .. next a small high powered speedboat .. jet propulsion

[@pawekasprzak2682]

Tank?

[@lennym1636]

Electric dirt bike, or a submarine...

[@JuPac420]

I’ve really enjoyed this series, I’m kind of sad to see it come to an end ahaha. You’ve done an excellent job, really fantastic. As one engineer to another I appreciate the amount of customization you put into this, I can tell you put extra effort into building it yourself instead of opting to buy pre-made parts. Excellent job!

[@JetSkiBrothers]

Building your own jet ski, the cool factor is off the chart! Really appreciate this build and all the hard work you put into it.👍 looking forward to seeing the next water test

[@B.Cote39]

HEY JetSki Brothers pretty awesome too!!! he did a great job didnt he!! Im gathering the knowhow to put a bike motor in the old seadoo so thx to all you guys for sharing your skills!

[@marinusadrianus2886]

Berg Matt zwart glanzend zwart en Carbon dan is dit echt een beest om Te zien 💪🏽💪🏽

[@quakxy_dukx]

I’m impressed by how well it planes across the water. It looks great too

[@gunnarfernqvist4896]

Impressive engineering skills! Impressive to see how you master everything from construction to welding and woodworking as well as a nice paint job.

[@theperson7718]

Need to install some kind of lock out system on that revers lever so it doesn't accidentally slip into revers at speed and send you over the handlebars.

[@xabi_merino]

Amazing!! Quick question, how do you change gears (might have missed it in one of your videos…)

[@keonlawrenc5145]

i love the series but their is only one thing i want to know......how do you change gear an use clutch......because you did not explain that part.....?

[@keonlawrenc5145]

Is this for real or is this just another one of those fake winner scam.....

[@marcioreis2648]

I'm completely blown away young man, your skills are just awesome . I'm extremely happy for you. Can't wait for the test drive. 👍👍👍👍

[@THEFALCON58]

One on each side forward facing vents for more cooling and exit back. wouldn't aluminum be better than steel and keep the weight down a lot. ? Plastic car door pockets may work for external vents . ?

[@davessparetime83]

If you hold your reverse handle half way it will act as neutral. Make sure to get or make rear sponsons for each side to control roll.

[@shelbyseelbach9568]

He literally said that halfway would be neutral, several times.

[@altheboss5722]

great job.but let me ask you this .how are you shifting gears on the jetski I did not see a gear lever. kawasaki zzr1200 engine does not come with automatic transmission far as I know.

[@1one3_Racing]

It doesn't look like it was made in a shed. It looks like a Chinese replica of a Yamaha! So I guess you've succeeded in your task!

[@agusjunaidi1991]

Thanks for completing the video, you're awesome RESPECT ❄️

[@ludolulu5632]

Total cost for this super project ?

[@MajorCatas]

My Dad was the #1 Jetsprint Racer in NZ back in the day so I helped him pull jet units apart and put them back together again many many times, always trying something to make them a bit better. Your self-fabbed jet unit is just so cool. Well done. The whole project looks fantastic, especially the handling. Just one engineering question, is it possible to separate the motor from the gear box? By the time you gear the engine down in the gear box and then gear it back up again you could probably run the engine direct to the jet unit saving time, effort and weight. I am assuming that 6th gear is direct drive like a car though. Great job!

[@rootvalue]

So incredibly impressed with your planning, execution, follow-through, and commitment to correct issues. Well done.

[@darkkevind]

Really enjoyed this build series, what you've done is excellent! Hat's off to you sir. One thing I did notice right at the end there, where you've made the joins of the rubbe seal around the two halves, I think you'll have an issue with water ingress in both of those corners. I think what would have been better, is if you carried on round each corner and made the join on the straight, and if you couldn't do one join (because maybe the lengths of the rubber weren't long enough), made sure any joins were on a straight part, instead of at the corners 👍 Amazing end result though!

[@ДмитрийЛитвиненко-е8ц]

Великолепно!Люблю смотреть когда человек может что-то делать руками!

[@guillaumegateau5854]

Superbe travail, ingénieux. Tu promets un avenir brillant. Vivement le prochain projet 👍👍

[@Sgt_Hest]

Briliant, love to watch this project, respect! Wonder what will be the next project :D

[@joriverbart795]

Hey man don’t you need a license number to safe you from a ticket

[@martinchristiansson658]

Really cool! Actually, I got inspired to get jetski licens because of this jetski serie👍

[@charinaalveny8847]

Your home environment is comfortable and beautiful with a very beautiful lake, I really want to live and have a house there ❤️

[@haskellfilmz]

Wow! Now that's pretty incredible! Too much work for me! Tell me this guy is not a designer/ machinist/Artist.

[@BTR2018]

That’s a killer video 🤙🏼

[@ostryt4928]

Hi. I have similar project jet ski with motorbike engine. Main drive is on chain but going to do like yours on tooth belt. Can you tell me do you have tooth pulleys the same diameter ratio or they different ? Been today on water, 6th gear, max reevs was running fine but not sure 1:1 is ok for jet pump 🤔 What your thoughts about ?

[@ChefViana]

I thank you, because it was inspired by your videos that I started studying and I'm already building my first boat. I want to play your homemade Jet Ski. It's admirable your skills, congratulations!

[@sport1349]

Jornt ik heb er geen woorden voor,toch wil ik het proberen > JE BENT EEN GENIE

[@Martin-pk5zd]

Wat een geweldige machine heb je gemaakt. Vakmanschap! Mooi de bouw te volgen. Thanx!

[@WJansen]

wouw. echt heel gaaf. gedaan man. Kunnen wel voor de grap drag racen tegen mijn seadoo rxp 215.

[@amsterdamrico]

Echt mooi wat je voor elkaar hebt gekregen. Maar snap niet echt waarom je zoveel hout gebruikt man. Is glasvezel niet handigere geweest?

[@theshirehighlander7292]

That is some great craftsmanship. I also like the place you live. The houses are sooooo beautiful.

[@marquisethomas5611]

@3:30 he going do what to the seat ? 😮🤨

[@Marvinfj32]

Fine work young man. But the tossing the parts down on the table gets a bit annoying. . Petty? yes, but the little details are what makes a vid just a vid to making a professional movie. But again, very fine work. I wish you the best.

[@hinkendunken3468]

This is sick!! Can't belive that you made that, looks like it was made in a factory, well done

[@keeperlit.leterrip7722]

A zx12 will not perform as well as it should do without the RAM air intake hooked up so that extra air enters the intake at higher speeds. You may not be getting its full potential without directing air into the two intakes from the front of the jetski. A motorcycle designed for RAM air will hesitate and lack power from about 5k rpm upwards.

[@moosenbeans903]

Just thinking out loud in the states them things spray water straight up from the nozzle goes 10+ feet up like pee think it’s like a water flag. Next is the jet boats here mild to stupid fast they can tilt the out drive up and make 100 ft rooster tails. Think that would work on yours? Maybe adj trim tabs

[@ChefViana]

I live in Rio de Janeiro, Brazil and I'm setting up a small shipyard to manufacture small boats, speedboats and Jet Ski.

[@erikhumble9797]

Super gaaf! En uniek.. ben benieuwd naar de test drive video