Fusion 360 export component as STL | Fusion 360 tutorials

Try Skillshare for free! (referral links). Premium classes on your topics:
My Fusion 360 classes on Skillshare:
www.skillshare.com/en/r/profi...
skl.sh/3ZrqlKP
Recommended 3D printing classes:
skl.sh/3MShtZJ
skl.sh/3Mqf4ov
skl.sh/3MusT5q
Recommended Graphic Design classes:
skl.sh/3snKiWL
Recommended Premiere Pro classes:
skl.sh/3QLELmj
skl.sh/3u8UBhJ
Recommended Blender 3D classes:
skl.sh/3u3q3hB
Save 50$ when you subscribe to Fusion 360: aklam.io/oTrjMY
Get a 10% discount when you order from Xometry get.xometry.eu/r/e3ee3233cc
In this Autodesk Fusion 360 Beginner Tutorial I demonstrate the solution how you save a component as an individual STL File. It is good to know how to export individual components from Fusion 360. After this tutorial, you will know how to save individual components from an assembly file. As we will see in the end of the video, it allows you to export the component and open the individual file / individual component in the slicer, before creating a G Code and sending it to your 3D printer for your 3D Printing project. I use the Prusa slicer since I do my 3D printing on a Prusa 3D Printer.
3D Modeling in: Autodesk Fusion 360.
Homepage: www.sw3dish.com/
Sound effects: www.epidemicsound.com/referra... (affiliate link at no cost to you)
KZbin channel: / @the_maker_letters
3D Printer appearing in mini photo: The Original Prusa i3 MK3S+

[@The_maker_letters]

Did this Fusion 360 tutorial help you? You can buy me a ☕ if you want to support the channel. www.buymeacoffee.com/themakerletters Thank you in advance ! :)

[@ostapbender5791]

Perfect!

[@The_maker_letters]

Thank you!

[@user-yo4hv3dn1y]

it only says export or save copy as

[@The_maker_letters]

Did you save your project before you tried export?