Fusion 360 - FIX 4 Axis CAM Wrap Problem - Ask LarsLive

FIX 4 Axis CAM Wrap Problem is a snippet of Sunday's Ask LarsLive. You Can watch the full episode here:
• Ask LarsLive Fusion 36...
(The advice in my videos are my own and are not intended to represent the views of my wife, children or employer)
My email:
[e-mail]
Want to learn more about Fusion 360? Check out this link:
autode.sk/2rXApL2
Free CNC Handbook:
www.larschristensen.org/free-...
LET'S CONNECT:
/ lars_cadcam
/ mrlarschristensen
/ cadcamstuff
MY SITE:
www.larschristensen.org/

[@evanlacava9213]

More Lars CAM 😁👌🏻👌🏻👌🏻

[@radkemachinetool6587]

I am trying to do a part with some features full 4th simultaneous and other features 3+1. I’ve tried Tool orientation, but when I simulate, it shows the XYZ coordinates incorrectly on all surfaces except the 1st one which is G54. Please help with programming a part using both full 4th and rotary positioning on multiple rotational surfaces. Thanks Lars for your channel!

[@qqqqqqqq1407]

there is a way to do a continuous 4th axis wrap toolpath within 2d contour with a stepdown and everything just I can't figure out how to post the rapid moves properly so when it goes into the next cut(stepdown) the rotary moves slow.

[@jimbarchuk]

"The RAP function! Boom-chicka-boom." [crickets] Tough room.

[@thomasrahm]

Do you have the same (w)rapping option with 3D toolpaths? Struggling with a v-belt drive wheel on my 4 axis cnc mill ... and no, I don´t have a lathe. that is what I´m building ... :-)

[@radkemachinetool6587]

What about the fact that the Key would be tapered?? This is the problem I am searching for which brought me to this post. No answer to my problem yet.

[@timjoy6609]

You've probably figured this out, but you can just cut the long sides of the key with a normal 2D contour with no wrap. Use the wrap only for the cylindrical face around the key.

[@Sarwiz1]

no one in their right mind would machine a key into the part. i think u had it correct in the beginning

[@timball4324]

The "rap" function lol!

[@automan1223]

Does Inventor do 4th axis rotary tool paths easier than Fusion ?

[@cadcamstuff]

No. It is the same CAM kernel in both software

[@automan1223]

@@cadcamstuff ty