Fusion 360 - RC Engine Modeling (Part 1)

This video will show step by step on creating 3d model of RC Engine , due to the length of the video so i divided to a several part of videos. You will learn various technique on the sketching, modeling, assembly, and animated mechanical movement of the RC engine.
Part 1 Video : • Fusion 360 - RC Engine...
Part 2 Video : • Fusion 360 - RC Engine...
Part 3 Video : • Fusion 360 - RC Engine...
Content in this video :
Engine Crankcase
Sleeve Bushing
link for the drawing a360.co/2ZpTQA5
Note: the i didn't follow exactly 100% form the drawing, but form the video you will get the idea how the create this models.
#Fusion360
#RC Engine
#Nitro Engine
=================================================================================
Help me to spread the knowledge by donating to my paypal account:
paypal.me/Didi...
=================================================================================

[@geraldruzira5119]

Wow!... thanks for the video, I look forward to go through part2 and part3.

[@DidiWidyaUtama]

You can find part2 and 3 inside my channel

[@manricobaldeschi8057]

già così è un esercizio carino...

[@DidiWidyaUtama]

Grazie

[@technikrosa]

Very awesome work! Would be great, if you share drawing in description under this video.

[@DidiWidyaUtama]

Sure, but i need some times to finish up all the component drawings and annotations, i'll let you know when it's done

[@isaacweber1918]

Hey Didi, the reason the slot was off-center was because the offset plane you created at 8:45 was not in the center of the cylinder. It should have been placed at -37.5 mm from offset. You corrected it with the sketch at 31:00, but I thought I'd comment to let you know.

[@DidiWidyaUtama]

Good, thank you for your feedback, I appreciated

[@isaacweber1918]

@@DidiWidyaUtama Also just wanted to say thank you for being so generous with your YT channel. I am learning Fusion 360 for my job and learned a lot from your videos. Have you ever printed a model you made in fusion? It would be super cool to print out the RC engine and see how it works!

[@DidiWidyaUtama]

@@isaacweber1918 hi thank you, for this rc engine i haven’t have a chance to print it, but if you do, please pay attention to the joints tolerance you need to add, good luck

[@klauskurt2901]

Sometimes it's not so easy to follow your video. You already have drawings. You should provide them, it would be easier for the viewer, and everyone can find their own mistakes more easily. The viewer also learns to read drawings. Many thanks

[@DidiWidyaUtama]

Thanks for your feedback, i will give you the link for the drawing in the description pretty soon.

[@manricobaldeschi8057]

Manca la parte dello spillo che inietta il carburante

[@louies6914]

I cannot understand when you are drawing the first profile,why are you using diameter dimensions?

[@DidiWidyaUtama]

louie s it’s just common sense if we like to measure a cylinder , than we usually measure in diameter instead in radius.

[@louies6914]

Didi Widya Utama I figured it out after actually making the part.I thought you were going to make something else with that profile and then I saw how stupid I was :).I got to the point where I' m done with those two slots and with that revolve operation from inside that channel.I' m at 23:25 with the part right now but I had to take a break since I'm on the PC for 5 hours now.Anyway keep up the good job,those parts are fantastic.

[@DidiWidyaUtama]

louie s great, keep on going, thanks for visiting my channel anyway.

[@louies6914]

@@DidiWidyaUtama Well,I saw good stuff.I managed to finish this part.I will continue with the next parts.Thank you for the video!

[@DidiWidyaUtama]

louie s U’welcome