Tap to unmute

Fusion Friday - Boundary Fill

  Рет қаралды 3,212

Brad Tallis

Brad Tallis

Күн бұрын

Пікірлер: 45
@justinchurch8440
@justinchurch8440 17 күн бұрын
Its also super interesting that they combined this function with surfaces and solid bodies. Usually, these two functions are separated in other CAD programs (as we all know again). Anyway, great to know that Fusion does this and now we know where to find it lol. Thank you!
@luis7899
@luis7899 4 ай бұрын
Thanks Brad! I am glad I am not the only one that found confusing which check box to use when using this command. As an Autodesk Evangelist maybe you should suggest to the dev team to make the tool more intuitive. I love Fusion anyway.
@justinchurch8440
@justinchurch8440 17 күн бұрын
So, Fusion obviously needs to make this simpler, all they need is a dialog box that shows each body created during the "Boundary Fill" operation. All CAD softwares do this, as we all know but it is normally called "intersect" say in SW.
@amforiconsulting
@amforiconsulting 8 ай бұрын
Thanks for covering that Brad 👍🏻 The example with surfaces is pretty straightforward but, as you rightly say it's the selection of cells that really complicates the use and understanding of it. Maybe a graphical preview when selecting cells would really help users understand this tool better
@bradtallis8968
@bradtallis8968 8 ай бұрын
Ya, I wish Fusion "highlighted" the regions for each cell. I had another more complicated example that had multiple cells, but it made the video way too long, so I cut it out. Maybe I'll show it in a future webinar or something. Thanks for watching and commenting!
@amforiconsulting
@amforiconsulting 8 ай бұрын
@@bradtallis8968 It's totally understandable for filling a bounding box of surfaces and planes. It's when it's used with creating intersecting bodies when it really becomes confusing and not intuitive at all. With that water volume example it's almost easier to create a zero offset surface on the inside and a zero offset plane at the top and then use boundary fill in the same way you show at the beginning, because that way it results in a single cell to select.
@DJN1K3
@DJN1K3 4 ай бұрын
Thanks for a great explanation and use
@billyfrank6318
@billyfrank6318 8 ай бұрын
Great Explanation on a tool that I have avoided because I didn't understand it well enough... Now I do thanks to you Sir, well done!
@bradtallis8968
@bradtallis8968 8 ай бұрын
Glad it helped!
@rodsdaytona
@rodsdaytona 8 ай бұрын
Hey Brad glad to see you back in the saddle. always a big help!
@bradtallis8968
@bradtallis8968 8 ай бұрын
I'm glad you find the videos useful. Thanks for watching.
@JANtheDane
@JANtheDane 2 ай бұрын
Brilliant!
@americorosales2085
@americorosales2085 8 ай бұрын
thanks, Brad for sharing your tutorials and experience, again I will follow up on them.
@bradtallis8968
@bradtallis8968 8 ай бұрын
My pleasure!
@MichaelLange-m7x
@MichaelLange-m7x 6 ай бұрын
Maybe the checkboxes are in order from outside to inside? Not sure what the top check was for since you didn't show that one. I'll have to try it myself...
@leiflindqvist9095
@leiflindqvist9095 8 ай бұрын
Absolutely brilliant, I can see using this for a lot of applications. Thanks
@bradtallis8968
@bradtallis8968 8 ай бұрын
Glad it was helpful!
@roncooper6302
@roncooper6302 7 ай бұрын
I knew Fusion was powerful, I just didn’t know how powerful until I discovered your channel. You are great. Thank you.
@bradtallis8968
@bradtallis8968 7 ай бұрын
Awww, thanks for the nice comment. I'm glad you are finding my channel useful. Have fun Fusion'ing!
@vorsprung2330
@vorsprung2330 8 ай бұрын
Thank you so much Brad Glad to see you all the time
@bradtallis8968
@bradtallis8968 8 ай бұрын
You are very welcome.
@darrenvosper634
@darrenvosper634 8 ай бұрын
Your a great teacher Brad
@bradtallis8968
@bradtallis8968 8 ай бұрын
Thank you! I appreciate that comment.
@CarbonGlassMan
@CarbonGlassMan 8 ай бұрын
Great video. I am getting back into Fusion and this is helpful because they keep changing Fusion and it's layout.
@bradtallis8968
@bradtallis8968 8 ай бұрын
Glad it was helpful!
@CraigHollabaugh
@CraigHollabaugh 8 ай бұрын
Thanks "vase half full guy", I had no idea what Boundary Fill is.
@bradtallis8968
@bradtallis8968 8 ай бұрын
lol. Thanks for watching.
@WardInstruments
@WardInstruments 8 ай бұрын
Great stuff! Thank you!
@bradtallis8968
@bradtallis8968 8 ай бұрын
Glad you liked it!
@IceCreams62
@IceCreams62 8 ай бұрын
Very useful, thanks a lot Brad 🙂
@bradtallis8968
@bradtallis8968 8 ай бұрын
Glad you found it useful. Thanks for watching.
@joell439
@joell439 8 ай бұрын
Thanks - definitely earned a subscription from me. Looks like I have some work to do reviewing your other videos 😊
@bradtallis8968
@bradtallis8968 8 ай бұрын
Thanks for subscribing! I hope you enjoy the other videos.
@StraightThread
@StraightThread 8 ай бұрын
Very useful tip! Thanks, Brad.
@bradtallis8968
@bradtallis8968 8 ай бұрын
Glad you liked it. Thanks!
@williammills5111
@williammills5111 8 ай бұрын
Thanks, Brad!
@อีลอนคาร์ก
@อีลอนคาร์ก 8 ай бұрын
Thank you Teacher
@rbyt2010
@rbyt2010 8 ай бұрын
Thanks for the video, Brad. Great to have you back. Sub'd
@bradtallis8968
@bradtallis8968 8 ай бұрын
Thanks for the sub! Much appreciated!
@ikbo
@ikbo 8 ай бұрын
Hi Brad, weren't you on the fusion team? Have you left AD?
@bradtallis8968
@bradtallis8968 8 ай бұрын
Ya, I'm no longer at Autodesk.
@gevanvliet909
@gevanvliet909 8 ай бұрын
So boundary fill can also be used to copy bodies. Is there a use case for that (over normal copy/paste)?
@bradtallis8968
@bradtallis8968 8 ай бұрын
Not that I can think of. I would use the normal copy/paste. Thanks for watching!
@JokelesComedian
@JokelesComedian 4 ай бұрын
Does not work. It will not let me select anything.
@markedtky
@markedtky 4 ай бұрын
Seed cell doesn't work. Fusion360 is just broken.
Fusion Friday - Sketching on a Drawing
6:15
Brad Tallis
Рет қаралды 1,7 М.
Adding Draft in Fusion
14:44
Brad Tallis
Рет қаралды 2,2 М.
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН
Гениальное изобретение из обычного стаканчика!
00:31
Лютая физика | Олимпиадная физика
Рет қаралды 4,8 МЛН
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Two More French
Рет қаралды 42 МЛН
Une nouvelle voiture pour Noël 🥹
00:28
Nicocapone
Рет қаралды 9 МЛН
Slicing Through Your Designs: Section Analysis in Fusion
13:51
Brad Tallis
Рет қаралды 2,2 М.
Fusion Friday - Direct Editing
7:41
Brad Tallis
Рет қаралды 1,8 М.
Design a Best Selling 3D Printed Vase in Autodesk Fusion
8:10
The Maker Letters
Рет қаралды 234
Fusion Friday - How would you make that?
13:36
Brad Tallis
Рет қаралды 3,4 М.
Fusion Friday - Intersection Curve
10:03
Brad Tallis
Рет қаралды 2,3 М.
Pattern on a Path
15:34
Brad Tallis
Рет қаралды 3,5 М.
Fusion Friday - Ground To Parent
9:20
Brad Tallis
Рет қаралды 2,1 М.
Fusion Friday - Creating bent tubing
18:43
Brad Tallis
Рет қаралды 3,3 М.
Fusion Friday - Scripts with AI
9:53
Brad Tallis
Рет қаралды 2,3 М.
The Best Band 😅 #toshleh #viralshort
00:11
Toshleh
Рет қаралды 22 МЛН