FX Impact M3 1st regulator modification

[@sameraloreibi5750]

I liked your video and it was very interesting because I am suffering from slow recovery after I had a fast recovery , but once I raised the pressure in 1st reg things changed and even the small o ring inside the body of the regulator was damaged and the piston o ring as well was damaged

[@5stargunsandgear]

Great mod. Huma Air is sending me a new front reg they just started making for the M3 will be hoping its a good replacement for those that cannot machine thier own regs. Hope to see meaningful gains

[@BhaursAirguns]

Yes Huma new 1st stage regulator works good

[@chrisfigueroa3361]

Awesome I have already replaced that whole reg three times because it starts to leak from the breathing hole so thanks for sharing be safe buddy 💯

[@sameraloreibi5750]

Replace only the small tiny o ring in the body of the regulator which sets in the middle at the breathing whole area from inside and the leak will stop

[@chrisfigueroa3361]

After many times changing 0rings on the first reg I have two first stage regs from fx they both leak after I change 0rings after about a couple of weeks it just leaks from breathing hole so I bought a huma first stage reg for my fx m3 now it's good 👍 so far fingers crossed thanks for the info I tried what you did but it still leaked so I just gave up and got the huma hopefully this will solve my problem ty again it's always a pleasure watching your videos

[@BhaursAirguns]

Thank you. Hope Huma will work for you. I prefer FX Regs over Huma. Huma is good initially. If we adjust it again and again it starts showing issues. But for 1st reg as we don't need to adjust it often, Huma should work well

[@marcioeidelwein7610]

​@@BhaursAirguns What kind of material did you use on the tip of the disc springs pin, where does the sealing with the adjustment screw?

[@BhaursAirguns]

@@marcioeidelwein7610 I use peek material or complete piston made of peek. Peek is much harder material than delrin. But as I set the 1st reg pressure at 160 bars or higher, I concluded that peek is better for instant sealing at such high pressures. It is not as flexible as delrin. But in 2nd reg I am using delrin piston as I normally keep the 2nd reg pressure at 110 bars.

[@marcioeidelwein7610]

​@@BhaursAirguns thank you

[@sameraloreibi5750]

Just change the small tiny o ring which sets inside in the middle that no one sees it, it is under breath area and hard to take it out and to fix again , the leak coming from their.

[@JoseSantos-jd3dn]

Hi. Greeatings from Portugal.That is a good mod, congratilations. I will share what i´ve made that works too. In my case, I have a huma reg gen 2 for my fx crown, and I discover the piston (brass) and springs (0.4) from huma gen 2 are the same as fx 1st reg (plastic piston). So I change it and add 2 more springs. So 7 sets of total 14 springs in this order ))(())(())(()) 210 bar 1st reg and 180 bar on second. But if i had a lathe, I tried to copy your mod just because is better🤙

[@aqdas1236]

Just subscribed to your channel sir after seeing your excellent work, I have a question.. How and where did you learn this skills? Great work 👏

[@BhaursAirguns]

Thank you for liking my video. One learns the work in which one takes continuous interest and gives continuous time. Decisions are all from God

[@aqdas1236]

@@BhaursAirguns keep doing may Allah bless you 👍

[@Sansyed]

❤lovely work.veey informative

[@Hunting_lover_pak]

Good ho Gaya ❤

[@BhaursAirguns]

Thank you 😊

[@raultamez1332]

Good video I have a cuestion I rebuild the second stage regulator in my m3 several times but when I screw the bottle and I open the regulator don’t hold any pressure the air star leaking trough the barrel what you think it’s thank you

[@BhaursAirguns]

Valve is defective

[@chandhaobijam5743]

May i know what is diameter size of the transfer port?

[@theairgunner6124]

So,sir i can adjust 1st reg pressure without draining or fire for to empty the 2nd reg

[@BhaursAirguns]

For 1st regulator adjustment there is no need to empty the plenum

[@armankhanjony7843]

Dear, will this system solve the impact m-3 main problem leakage problem? 

[@BhaursAirguns]

@@armankhanjony7843 it depends that where from the gun leaks

[@ertogrul12]

hi mate could you sell to me your first stage mod. reg piston and your modification tigger for my impact m3 ? regards

[@BhaursAirguns]

I have sent a couple of triggers but I found that it's not a plug and play part. A lot of minute adjustment is required. Hence I am not selling it anymore. Similarly I understand that one has to understand the real problem of the regulator to fix it. The piston and brass part can be sent but I can't say these will be productive for you or not

[@gagain100]

Alo can I buy modified parts from You ?

[@BhaursAirguns]

I do offer some parts but 1st regulator parts are not plug and play. So I do not offer them.

[@gagain100]

@@BhaursAirguns I saw some delrin between regulator screw and piston, but I'd be happy to buy complete set if it fits stock first reg case. I'm able to fit them.

[@BhaursAirguns]

@@gagain100 The new version of FX pistons is similar to what I made. All piston made of brass and front sealing tip made of delrin. You can easily buy FX latest pistons from FX. It will cost you less that at what cost I can provide you the piston

[@leilei6262]

哈喽

[@顺开]

来了