That saved me from sending my Hatsan mags back right after I got the rifle in the mail. I buggered one magazine up and the other came pre-buggered, so I had to fix both of them. I was looking forward to getting down to business and sighting in my new rifle, and boy was I pissed. I had never used this system before and didnt know what I was doing. You just saved me another week of waiting. Nice job.
@shiroxyui3 жыл бұрын
thanbks dude, helped me out - didn't know how to reassemble mine after cleaning the insides
@joedoe85848 жыл бұрын
Thx Ernest. Funny I just asked how the magazine assembles 3 days ago on Airgun Nation forums. Thanks for putting this together.
@ernestrowe50618 жыл бұрын
I seen you post, and that's why I made the video.
@albertopapi44457 жыл бұрын
I had the problem that on mine to were the screw got loose and the magazine spring loose his tension. Thanks to your video now I got it working as new.
@nickshergar6 жыл бұрын
This video saved me SO much hassle... Thanks so much buddy......
@relzric8 жыл бұрын
Cool. When I put mine back together I did not know the top of the wire went in a hole. I thought it locked in place from pressure. I will have to take it back apart. The first time I did it it kind of freaked me out when that spring buzzed out. Thanks for the help.
@MattsplatsGunReviews8 жыл бұрын
Thanks a lot for the video. This was really helpful. I don't think I would have figured it out without it.
@naser76114 жыл бұрын
This video saved my life 😅 Thanks for your video and shame on FX with this stupid magazine.
@manolofdez37395 жыл бұрын
i appreciate your help, thanks very much!!! from mexico city
@mrshoto90358 жыл бұрын
Thank you Ernest - nicely done, & very helpful. Best regards
@fekrire7 жыл бұрын
Wow such a great video, keep up the great content
@marierosellev7 жыл бұрын
thanks great video. How much spring do I remove because the first pellets skirt gets squished when I reload for my FX Crown?
@fred95326 жыл бұрын
Great repair videos.
@alviahmed25825 жыл бұрын
now i know how to make one! thank you
@juanmc81007 жыл бұрын
Thank you very much for the video was very useful for me
@davidkenneth4993 жыл бұрын
Ernest, my magazine keeps coming loose, after loding several times the nut comes loose or apart, with the 2 ball bearing needing put back in place, I am also worried about losing the ball bearings, can you help me sort out this problem, may be a locking nut would help, as you have to get it just right tightening it back up or it will not index properly, the mag is in .22 David.
@cavalcantecavalcantemtogro39466 жыл бұрын
Show de bola Parabéns
@johnsingleton60798 жыл бұрын
That's a shame. What about the smaller verminator magazines, will they load from the other side and work properly? Many thanks John
@youtube_threeBairguns4 жыл бұрын
Hola maestro, tengo una consulta tengo problemas con el supercargador de mi fx impact mk2, aveces el bolt pega en la parte plástica y no pasa el poston que podrá ser?
@wewekokowe68875 жыл бұрын
One day maybe... FX will evolve and they make a gun what can cycle a magazine (without shitty springs)
@onepiece8884 жыл бұрын
I know Fx has increased the magazine capacity with the new design but I just wonder isn't it possible to inrease it even more with a drum magazine mechanism by enabling to load the inner circle ?
@johnsingleton60798 жыл бұрын
Cheers for video Is there anything you can do to make these mags load from the other side for left handers?
@ernestrowe50618 жыл бұрын
no! It would be nice if FX can machine mags for lefties, but the lower mag stop has to be modified to accept both mags, To much work and may increase the price.
@Marshall2012omg7 жыл бұрын
John Singleton use a mark 2 vermi or bobat mag if you want it load from left hand side. Works for me.
@johnsingleton60797 жыл бұрын
Marshall Flanagan Thanks for the advice. I'll have one very soon!
@paulwainwright81496 жыл бұрын
four rotations is far to much this will mark every pellet that goes through the mag you need the min number of turns to feed all pellets l have mine on one and a quarter
@moonc4lf3 жыл бұрын
I guess it takes only one turn for Streamline magazine, there’s no way it can go 4 🤷♂️
@who0who8 жыл бұрын
Thanks...
@Squirrely14989 ай бұрын
Well all I did was break my spring 😅
@eric11388 жыл бұрын
Thanks
@paulwainwright81497 жыл бұрын
Good basic descriptions but I don't always agree with all your actions I have just cleaned and reassembled my magazine with 4 turns loaded the mag and manually pushed all the pellets through with a piece of wood .Inspection of the pellets showed a line indicating a snapping action of the inner mag rotation I would suggest the min amount of rotation of the spring to feed all the pellets through manually without marking them