FX Panthera and FX Dynamic Barrel Removal and Install

[@JohnVentarino-ey5ln]

Ernest how come you tell us to leave comments on your channel and when I do you never answer me.

[@JohnVentarino-ey5ln]

Exactly what I mean you can't even answer people unless there your FX fag boys.

[@sandyschupper8401]

I have front AND rear bottles on my 600mm. Can you go over the procedure for removing and replacing BOTH bottles? I am going, as you did from .22 to .30

[@anthonydefillippis8806]

Hey Ernest! Barrel kits are available now?

[@MrBiscuit_WithButter]

I wish to change the caliber of my Panthera Hunter Compact from .25 to .22. I asked two authorized dealers, and they said no. What parts do I need to complete this change?

[@FXAirguns]

We have a video on our channel how to change barrel length and caliber for the dynamic block . The thumbnail shows a King but the action block is the same so the same parts apply.

[@pcpjavali8357]

I want to buy 100 liners I have an import agent for Brazil thanks Luis Barbosa

[@rebevepi]

Buen día! Una pregunta, me compré un FX Dynamic Express 600, hay manera que le pueda cambiar el cañón por uno de 500? Venden el cañón por separado? Y el cañón externo para el tamaño que quedaría?

[@FXAirguns]

Yes it is possible to install a 500mm kit 👍 the outside diameter stays the same .

[@chrisparkin431]

Reminds me of my school chemistry teacher, never quite sure if he was in control of the next experiment or not when things were exploding

[@sandyschupper8401]

Also: Utah Airguns Messed up and only sent me 1:16 .30 Superior Liner and wrong probe. What else do I need to convert my Panthera 600mm dual bottle now in .22 to .30 ?

[@FXAirguns]

You need a complete barrel kit , barrel/plenum/shroud/probe and magazine

[@sandyschupper8401]

@@FXAirguns Utah Airguns is telling me that they are not able to order that barrel kit. Can FX sell that to me or can you suggest another source. I’m in Connecticut.

[@airshootist]

Thanks for doing this! Definitely helpful for all of us Panthera / Dynamic owners. I removed my barrel and shroud all as 1 piece by loosening the screws on the side of the receiver and then unscrewing the whole thing as an assembly, which worked fine as I needed to remove the shroud to access the valve. Soon I may be doing a caliber swap and will use your method here.

[@AirHeadArms]

Great video and looks simple, then again you make them all look simple lol, we appreciate all you do for our sport!

[@jeremysaunders9916]

Thanks Ernest for this, great info as ever. I use the same tools as you, Bondus Allen keys etc, love American tools and I am in the UK. Could you tell me what make of electric wrench you use for your allen keys the white one ?. Thank you. Ps.Or anyone else😊

[@gigolocan8914]

So your saying it’s ok to dry fire without the bottles and no pressure obviously to degass the plenum? I thought that was a huge NOPE!? even the manual says you shouldn’t.

[@tmright18]

My plenum does not drain when i disconnect the bottle and turn the (huma!) regulator ?

[@Nick-gi6ym]

It’s really great that you do all these barrel removal or etc. please don’t use power tools on these small screws. Great Job thank you

[@lectro88]

One more thing... Thanks for showing the Blow Out and the dual bottle removal procedure,. as I am adding 2nd bottle.

[@dalfry]

Does this void warranty?

[@ernestrowe5061]

Hi, no if done properly

[@dalfry]

@@ernestrowe5061 thanks! Good to know i can do this with my dynamic .22 so I can have a larger bore option.

[@sandyschupper8401]

is 1:16 correct for .30 slugs?

[@FXAirguns]

Usually it’s a 1:18 twist 1:16 is .22 cal slugs

[@revopqrs1]

awesome!! thats the info i was looking for, appreciate it!

[@fieldpro5041]

great info as always buddy. thanks so much for sharing

[@gigolocan8914]

I actually thought the blow out would be much more violent at 100bar

[@K1llerElite68]

Does anyone know what cordless screwdriver he is using?

[@hankvana2149]

Thanks! I really appreciate these videos!

[@eduardpelinel8211]

NICE WORCK .....CONGRATULATIONS .......

[@EdBraunbeck]

When will barrels be available?

[@FXAirguns]

You can order them true you FX dealer

[@EdBraunbeck]

@@FXAirguns - @UtahAirguns said the caliber change kits aren't being made yet. 🤷🏼‍♂

[@Eralov]

krale in eu also dont have barrel kits for the dynamic block

[@recklessjunkie]

Ernest I hope everything’s OK with you Newman & frommann I hope your still working your lathe for fx I think your a valuable part of the team 😢

[@wsmc8275]

Is the pellet probe supposed to be lose even with the set screw tight. Mine has play and is seated properly.

[@FXAirguns]

Hi , is the breach oring in place ? The one in the brass inlet .

[@wsmc8275]

@FXAirguns Yes it is. It's loose until it seats in the transfer port. 1/2 cocked, you can wiggle the tip of the probe. Not sure if this is by design. I do know, my transfer port is scratched pretty good by the sharp edges on the probe and maybe the loose fit is not helping. The cutout in the probe needs to be deburred. I was thinking of switching over to the HUMA pin probe and transfer port. So far I'm not impressed with the quality of FX. Won't be buying anymore.

[@andrespineda6998]

Great Video, I am just wondering if someone knows who is selling already the kit to convert my 22 to 30?

[@lectro88]

Ernest, You never cease to amaze me with your knowledge and ease of manipulating parts.

[@pcpkrait6964]

Fx dynamic AR 600 model masterclass please bro....

[@shine9680]

It sucks ill never be rich enough to own an FX gun..

[@zaegonz111]

Is their a tool coming to remove the valve seat?

[@ДмитрийДенисов-с6б]

Not easy