Awesome video bro👍🏻👍🏻👍🏻 I got the same pump. Where did you get the kit and what’s the part number? My model and serial number has worn off.
@Appiontools11 ай бұрын
Thank you! The part number for this kit is #KTG520-R. You can buy the kit directly on our website at this link:appiontools.com/ktg520-r/
@keehn204 жыл бұрын
Note! When he states that the notch on the head needs to face towards the relay and then tells you to repeat on the other head. Make sure you catch that gold nugget. Make sure the other head has the notch facing towards the relay as well. I bought a used machine off eBay and got it for 200$. They said it wouldn’t pump. Figured it just needed a rebuild kit. Nope. The seller did a rebuild on it and put one of the notches facing the wrong way. Knowledge will always be power.
@newkidontheblockism3 жыл бұрын
How long does this repair take?
@keehn203 жыл бұрын
@@newkidontheblockism 45 mins tops.
@newkidontheblockism3 жыл бұрын
How long does this repair take?
@Appiontools3 жыл бұрын
On average it should take 45 minutes
@OlGoodJoe4 жыл бұрын
I'm having a leak down problem that is not a cylinder problem. I know it's not a cylinder problem because when pressurize directly to the high side cylinder port right off the head, it will not bypass through the valves but when the block is in place there appears to be a bypassing of the pressure. I have checked all fittings and bubble tested the condensers while assembled. I feel it may be a problem inside the block that holds the gauges and mounts the condensers. Can you tell me how the block is ported (how pressure travels through it) so I can diagnose where the problem is please? Would sure appreciate it. I will check back here and I can be emailed at Mark@SunStateHVAC.com Thank you.
@OlGoodJoe4 жыл бұрын
I just sent an email to the above link.
@ball-se6gu4 жыл бұрын
I need to take the damn motor off the pump. Shit vid.
@bdog4u27 ай бұрын
This is about rebuilding the compressor not taking it apart.