Gaahleri GHAD 39 Air Brush Review

[@moneygangrepp4]

I just got mine today, for the price it's a damn good airbrush. thanks for your review.

[@Mannysscalemodeling]

Awesome man!! Thats for sure, your welcome!!

[@gaahleristudio]

awesome video! thank you so much for reviewing GHAD-39!

[@Mannysscalemodeling]

Your welcome! Awesome Air Brush GHAD-39

[@SteveRowe]

I wish you could use words other than "nice" to describe the spray. Was it smooth? Was it even? Was it uniform? Does the nozzle with the extra channels make a difference?

[@Mannysscalemodeling]

It is smooth and atomization is excellent!

[@StumpyGrumpsScaleSpeedShop]

Awesome review, thank you for the video! I'm looking to upgrade from my cheap Amazon Gothobby airbrush and this one looks like a great next step.

[@Mannysscalemodeling]

Your welcome, thank you!! Oh yea for painting models the GHAD-39 or GHAD-68 are awesome!!

[@jeffallen3382]

I picked up this air brush a few months back and was impressed! I really like it.

[@Mannysscalemodeling]

Cool thanks Jeff!! Me too!

[@oneteamgarage]

Awesome video! I just picked this airbrush up. Thanks for sharing 💯💪🏾🙌🏾

[@Mannysscalemodeling]

Thanks man! Awesome, its an awesome airbrush!

[@dwightatnorthernstar1820]

Nice. I have recommended after watching many cleaning vids., that one should rinse the cup and needle with water or warm water to get rid of cleaner which all airbrushes suffer from plating wearing off......thanks....

[@Mannysscalemodeling]

Thanks man!! Yea you can use warm water, I just use thinner in all mine and havnt had any issues yet after 36 years of air brushing.

[@andyrodrii1495]

Me pareció genial el Ariografo! y me encantó como lo limpias después de usarlo, amigó sera correcto si lo limpio con alcohol. un fuerte saludo para ti y tu canal 👏👏🤗👍🇲🇽

[@Mannysscalemodeling]

¡¡Gracias!! Yo uso diluyente de laca para limpiarlos.

[@projecto6305]

Good review 👍. Thanks 😊. Just subbed you get you closer to 1k. Now I have to catch up on your videos.

[@Mannysscalemodeling]

Thanks man I appreciate it!! Subbed you back and will be checking out yours too!!

[@ramblers69]

Nice review, sprayed nice!!

[@Mannysscalemodeling]

Thanks Tom! It did for sure!

[@PatrickKend]

I just purchased the Gaahd-39. They had it on sale on Amazon for $29.99. For that price I figured I couldn't go wrong. Thank you for the review Manny.

[@Mannysscalemodeling]

Thanks Patrick! Your welcome, the GHAD-39 is my work horse air brush! Awesome deal man!

[@Bruces-Eclectic-World]

Awesome Manny.... I have both brushes and love the GHAD-68, wait until you try that! The funny thing I just shot my review video of the 30 brush... Lol My video is not as good as yours... Lol The 68 will not disappoint you at all and it feels great in your hand. Trust me, I liked it so well I bought another 68 when they were on sale. They have been running special's on all there brushes! They mean to take over the market I think... Lol LLAP 🖖

[@Mannysscalemodeling]

Thanks Bruce!! Oh awesome! I will check out your video too for sure! The 68 is sweet from what I can tell so far, holding it was very comfortable! Cant wait to spray with it lol. Yes they have ive been watching them too lol. I think they are trying to too!! The 39 is awesome my new now goto airbrush for models! I subbed you too!!

[@Bruces-Eclectic-World]

@@Mannysscalemodeling Hahaha... Hold on Trigger... 🤣 The video is not done yet, still in the can... Hahaha I did do have an half backed video for the 68. Still learning video making at 69... Lol Watched "Grandpa Marks Hobbies" videos on the 68, 39, GHAC-98D... He does a great video on them and that is whey I bought them. I have 3 of them now and I might get me one of the GHAC-98D I see that you subbed and thanks. Much Appreciated Manny! LLAP 🖖

[@Mannysscalemodeling]

Oh ok LOL! Doing a good job Bruce with the videos from what I saw, going to watch more for sure. I did see Marks videos on it too very cool and awesome job! Your welcome for the sub!!!! @@Bruces-Eclectic-World

[@cardzscaledreams3917]

Nice review Manny...even though Im new to airbrush it looked like a nice wide spray pattern.

[@Mannysscalemodeling]

Thanks man!! Yea it was very nice! I cant wait to try the other one here this week!

[@cardzscaledreams3917]

@@Mannysscalemodeling cool, I'll keep an eye out for it👍

[@Mannysscalemodeling]

Cool Pat thank you, im looking forward to trying it out lol@@cardzscaledreams3917

[@cardzscaledreams3917]

@MSMVPodcast dude I've had my Iwata for 6 month and was terrified to use it. I finally did my first paint job the other day. Old Tom's build, and I can't wait to try it again 🤣

[@Mannysscalemodeling]

Oh nice man! lol Thats awesome! I hear ya I love air brushing@@cardzscaledreams3917

[@T-DawgsModelCars]

Awesome review brother!

[@Mannysscalemodeling]

Thanks bro!!

[@T-DawgsModelCars]

@@Mannysscalemodeling you’re welcome bro!

[@dragin79]

I just picked up one of these after watching your video and tried MCW enamels with the hardener and it was an epic fail. Not sure what I did wrong as I thinned them out and added their hardener. But long story short the body is back in the purple pond. I took the brush all apart and cleaned it hoping for better results this time around. Is there a paint that is pre thinned that you would suggest for a beginner so that I can spend more time learning the air brush and less time cleaning it as it seemed to clog quickly. Using a timbertech compressor at about 18 psi and I was first cutting the paint per MCW instruction then I tried 50/50 with a little bit of hardener no bueno. Thanks for any help you can give so I can get some paint on this 70-1/2 camaro!

[@Mannysscalemodeling]

Thanks man they are awesome air brushes! That sucks man sorry to hear that! I havnt used the MCW enamel paints yet. Busters custom colors is pre mixed and ready to spray, MCW also has lacquer ready to spray too and so does Scale Finishes.

[@thespectator2976]

i picked up an Iwata Eclipse HP-CS but i havent used it yet :( thought i had the time to start with this hobby but yeah, seems not at the moment (the iwata is my first airbrush aswell). Dunno if its any good for newbie like me :) love you content :)

[@Mannysscalemodeling]

Thank you I appreciate it! The HP-SC is a great air brush. If your just starting to airbrush it will be great for ya, just a matter of getting used to it like any air brush really. After trying this one GHAD-39 especially with the .5mm needle its my goto for air brushing models lol

[@Compliment_Thief]

1:59 GHAD* You missed out the A….. 🤷🏿‍♂️

[@nitroAl67]

Great review! I was thinking of getting this one or the Neoeco SJ83, after this review I’m going with the Gaahleri . I’m kind of new to the airbrushing, I had a old badger single stage. When you mix your paint your ratio is 4:1? I’ve never used that Mr. Color leveling thinner. Can you use that on acrylic paints? I’ll give it try. Thanks.

[@Mannysscalemodeling]

Hey @nitro Thank you! I have never tried the Neoeco line before. I had a Badger 150 I still have lol. When Im spraying Tamiya paints i around a 4:1 mix. Then if you need it thinner just add more Leveling thinner. The Mr Color Leveling Thinner is awesome for many reasons! The only Acrylic paints I have tried it in are the Ammo Cobra Motor paints. You will be more then happy with that Gaahleri GHAD-39! I will be using that in all my videos when air brushing models! Love it!! Let me know if you get it and if you have any questions feel free to email me and I will try to help you out

[@nitroAl67]

@@Mannysscalemodeling Thanks Manny! I’ll let you know . I appreciate the help! 👍

[@Mannysscalemodeling]

Your welcome, sounds good!! @@nitroAl67

[@Dude_Slick]

I would go with the Neoeco.

[@deputy3690]

How long did you wait in-between clear coats? Did the tip dry up while waiting? Thanks nice video

[@Mannysscalemodeling]

Thank you! For the video I only waited around 5min between each coat, most of the time 10-15min. No tip dry

[@danieljanssen4580]

You’re using 2K with no gloves or respiratory you better read up concerning the safety issues with 2K….wow

[@Mannysscalemodeling]

I was wearing a respirator when I was clear coating, as I stated I will be wearing one so I wont be talking.

[@j.d.greene3895]

I bought one of these a few months ago and I don't like anything about it!

[@Mannysscalemodeling]

Really? What kind of paint were you using? PSI? What were you air brushing, models or ? What didnt you like about it?