Xiaomi Mi Wifi 2 Repeater Range Extender | Full Setup Tutorial for the Ryze DJI Tello

ALTERNATIVE RANGE EXTENDER: • Tello Range Extender S... . Xiaomi Mi Wifi 2 Repeater Range Extender | Full Setup Tutorial for the Ryze DJI Tello. The Mi wifi repeater range extenders go for about $12. Find it here: amzn.to/2tRTYq7. You can also get it here: goo.gl/nToCnA.👀👀 It unfortunately looks like the Xiaomi Mi repeater is no longer available. I have not used it, but based on the research I've done this one will work as an alternative: amzn.to/3fFMrU... is a cheap way to extend the wifi fpv range of your Tello or any drone that uses a 2.4ghz wifi signal. I show you how to setup the Xiaomi Mi Repeater for both the Tello and another 2.4ghz wifi fpv drone in this video. I have been hearing from Android users that these steps work for them as well.
👀LOOK HERE It was just brought to my attention that the Mi Home app has changed slightly. You can still use these steps but some of the screens have changed. You have to click on where it says Home at the top then change your location to Beijing. Go back to the previous screen and select Tap to add a device. Then select Household sec... on the left side and then you’ll see the Mi Repeater 2 on the right. Select that and then this video will take you through the rest.
Find the Tello at the DJI Store: click.dji.com/A...
Here's the video testing the repeater: • DJI Tello with Xiaomi ...
Setup for the Ryze DJI Tello is in the first part of the video and setup for another 2.4ghz quad is towards the end.
If you missed my review series on the Ryze DJI Tello, you can find it here: • DJI Tello Drone Review...
My Landing Pad: amzn.to/2y7ZND5
My Headcam: amzn.to/2xzeVJH
AS ALWAYS, GOD BLESS YOU AND THANK YOU FOR WATCHING!
If you would like to support my channel, check me out on Patreon: / gadgetinspector . It's a great way for us to connect.
**This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows me to continue to make videos like this. Thank you for the support!**
My Product Recommendation Page on Amazon: www.amazon.com...
▶ Check out my gear on Kit: kit.com/Gadget...
Incredible Instrumentals by Ryan Little
KZbin: / ther4c2010
Soundcloud: / iamryanlittle
“Welcome to Wakanda”
CGI Snake by Chris Zabriskie is licensed under a Creative Commons Attribution license (creativecommon...)
Source: chriszabriskie....
Artist: chriszabriskie....
Barbarian by Pierlo freemusicarchiv....
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons....
Music promoted by Audio Library • Barbarian - Pierlo (No...
#ilikegadgets

[@GadgetInspector]

HERE'S AN ALTERNATIVE RANGE EXTENDER: kzbin.info/www/bejne/aneUXqN3it2abdU. Just in case you can't find the Xiaomi Mi anymore.

[@Derickandlannyfpv]

Sir this is a king level video ... Thank you!!!!! I'm wondering something to put up a very powerful extender on my house roof will that have the same effect but work better? or can two mi2 be joined? In the area there is alot of interference ... don't get me wrong the mi2 totally changed the video quality for the better... but is it wrong to want more or a fixed home station? Bless D

[@AlanBathurst]

excellent video th only 1 I have watched that explains exactly how to connect successfully great job

[@GadgetInspector]

Thanks Alan. I'm glad it helped. Surprising how they don't include any instructions.

[@michellem086]

@@GadgetInspector Agree this was the only video that adequately explained the process. The device I got today did include instructions but they're worthless. Thanks so much for this help!!

[@lifehackertips]

1. Connect to Tello and make WiFi password for Tello 2. Connect to WiFi extender 3. When WiFi extender asks what network to extend, choose Tello network

[@davidlowe5946]

I had despaired of actually getting my Xaiomi repeater working with my Tello. But after watching this (and some diligent work and a whole lot of swearing) I GOT IT WORKING! Thank you!

[@GadgetInspector]

Awesome, glad it helped.

[@Coqui-Media]

I have probably watched ten or more videos on this extender setup and YOURS is the ONLY ONE that got the job done! Expertly explained ... clear concise and no BS. THANK YOU!!!

[@theobserver2674]

BS= BiaS (detour)

[@BIGDRONEFLYER77RC]

Thanks brother, Thanks for this. I had mine for 7 months and needed help setting it up. God bless ya brother and happy flying.

[@GadgetInspector]

You got it. Glad it helps. Lots of trial and error but I finally got it to work.

[@Kingstonhawk]

What was the extended range? Was it more than 20 meters?

[@ChristopherSengkey]

Thank you bro, finally my lil tello can fly farther then ever.

[@Pinonyan]

I know it's old, but this was super helpful. Just bought a Tello ryze and the MI Wi-Fi extender, everything was explained clearly and I'm really happy.

[@GadgetInspector]

Glad it helped Joyce!

[@shanecinfo7415]

On Android and got stuck setting it up in Mi Home, connected to my Tello but it kept timing out and wouldn't go any further. Noticed my light was blue and checked my connects and had a Tello_Plus, and it worked fine! Skipped quite a few steps, somehow it connected everything itself, but I'm okay with that! Great video dude!

[@GadgetInspector]

Glad you got it worked out.

[@solarfry]

It’s a RANGE extender. You place it 100 to 150 from you and it extends your range another 150’. If you place it next to you, you get minimal benefit. You get 100 to 150’ depending on wi fi range. You check range with cellphone so as not to risk your Tello.

[@vineyardsaker6195]

Thank you for your explanations, I had a hard time with my Tello and your video solved my problem. Thank you!!

[@thisiangarcia]

I have seen several videos on how to connect the wifi extender to the Tello, and they're all quite difficult to understand. Perhaps, it's in the way on how they present it. But yours, it's all as clear as crystal. Thanks, Gadget Inspector!

[@GadgetInspector]

Glad to hear that; that's exactly why I make these kind of videos. Thanks for the feedback.

[@jaycorrao6648]

Thanks for the great video tutorials and reviews they are a pleasure to watch because they are easy to understand. I love my Tello. For it’s size and feature set it is by far the best drone out to date. I picked mine up for $100 and it came well-equipped with the quad, extra props, three batteries, a triple battery charger and other miscellaneous odds and ends. The video though 720p through WiFi is totally acceptable for making family memories and the wide angle photos it takes are simply outstanding. Obviously it’s not equipped to handle much wind but still for its size it’s amazing. I do use the Mi repeater if I am flying in an area larger than my backyard. I try to place the repeater central to where I’ll be flying and stand about 20-30 feet away.

[@GadgetInspector]

Wow, now that was a great deal you got for $100. I usually give away most of my drones once I'm done reviewing them, but I won't ever get rid of this one. Big fan of the Tello. Glad the video was useful.

[@chrisdehoedt1982]

Hi, I found this tutorial very useful. However it took about an hour to work out how to add a device in the Mi Home app. I finally discovered that you have to click the + sign at the top right of the page when you are in the room home page . . . Thanks Chris

[@gfp38]

Your video is excellent. I would never had thought to choose China, let alone all the rest of it. You're the best.

[@CAScience-w1y]

thank you kind sir, for the clear and comprehensive directions. After not using the extender for several years, I wanted to get back into it, and your video was instrumental. Wishing you a blessed new year!

[@GadgetInspector]

Hey thanks! I’m surprised and pleased that this video is still valuable.

[@jodymarty3179]

No way i would have figured this out without your video. Killer job. Thanks man.

[@GadgetInspector]

Glad it helped.

[@Blizofoz45]

Thanks for posting this I don't think I ever would have gotten mine set up if it wasn't for your video.

[@GadgetInspector]

Awesome, glad it helped.

[@nbkdraven]

Thanks for this tutorial. Just got my repeater in today and couldn’t figure it out fully by myself. My daughter is going to love me even more now. Off the subject I can’t wait till my Skydio 2 comes in around April or the second quarter of 2020. GAME CHANGING DRONE!!!

[@GadgetInspector]

Between the Mavic Mini and the Skydio 2 releases, the Skydio is definitely the more intriguing drone. Glad the tutorial helped on the Tello. Still my favorite little drone.

[@eacevedo325]

Thank You, a Whole bunch!!! -I was seriously discouraged, trying to get my Xiaomi Mi Wifi 2 extender, watching other "how to" vids, finally, after carefully following your clear direction, I am so very pleased that I had success with making use of the WiFi extender with my Hubsan H216A, Thank you for making this vid, -will follow and looking forward to liking more of your vids! Blessings and Shalom :-)

[@GadgetInspector]

Glad it helped, God bless and Shalom!

I live in Brasil, São Paulo. I become your fan and Yesterday i get my new Tello. Your're great person!! Thank you for help me choice the best one for me. God bless you!!

[@GadgetInspector]

Thanks, I appreciate that!

[@GustavoMiglioriniArruda]

Thank you very much for this very detailed tutorial !!!! I've just bought my Tello, but I'm already in love with it !!!!

[@klopossa2]

My Galaxy 5s didn't need a password. I got the plus on the reboot and my FPV is much smoother. I ran my route through the kitchen 3 times in a row without crashing. TY man Love your stuff..

[@GadgetInspector]

Yeah I've heard from a few guys that they didn't have to do all of the steps. Glad you got it going.

[@ajinoz1234]

Thanks for the video saved me LOADS of time. I found the only problem was after setup and re connecting for normal use. From another video i found this work every time. 1 power up MI extender. 2 Power up Tello then wait for the BLUE connected led on the MI extender. 3. Select wifi ####_plus on your smartphone. 4 Start Tello app and your away. Thanks again for your time putting this together.

[@joncarlson475]

Okay, This worked. I got my range extender in the mail yesterday from eBay. I used this video for the set up. It wasn't easy and after about 90 min last night I gave up. Today with a fresh mind I got it. And like you said once set up you don't have to do it again. It works great and my signal bars and video transmission are much improved. Tomorrow I will add my Gamesir T1d controller to the mix. and test it further. I used an Samsung S7 Phone, one thing in your video that caused me some initial confusion was that you stated you were using an Apple phone. (I just ignored that part and proceeded with your instructions.) Thank You for this video.

[@GadgetInspector]

Glad it worked for you.

[@DiscoveryOwners]

Thanks for your great videos on gadgets, too! I had one major problem with the Xaiomi I want to let you and your subscribers know about. I wasted several hours, nothing seemed to work. Bottom line, I was trying to get this configured at my desk...right below my TP-Link router. It’s string RF signal was overloading the receive side of the Xaiomi. I moved everything to another location and everything went flawlessly. Wish you were my neighbor! Needless to say, I subscribed.

[@GadgetInspector]

Thanks for the sub Bob and glad the video was helpful. Thanks for sharing!

[@rjamian]

Thank you for a very clear explanation,I had done it 6 months ago and somehow it needed to be reloaded again and not remembering the steps.So all works fine now.

[@GadgetInspector]

Awesome, glad it helped.

[@almeisam]

Thanks for the tutorial. It took several tries to get it to take the password when connecting to the -plus repeater, but once it did, it worked.

[@GadgetInspector]

Glad it helped.

[@thesoulkeeper31]

Finally someone who can explain every step go the process. Thank you so much. You just gained a follower.

[@GadgetInspector]

Awesome, I'm glad it helped. Thanks for the sub as well, I appreciate that.

[@ftl900]

Thanks for making this video!! I watched a different one but it wasn't as well made as yours. I appreciate your time and effort put into making this!!

[@davidlowe5946]

Thanks for the great video. Now that my tello is set up it works with both the Tello and the Tello FPV apps. I've been to 99 feet and STILL have my Tello in one piece!

[@GadgetInspector]

Whoa, sounds like you like to live dangerously 😂. Glad you got it all setup.

[@Relyx]

So I get to the part where in Mi Home I choose the wi-fi I want it to extend, and I choose my Tello. I click next, and it goes through the following steps: Connecting device, Sending message to device, Connecting device to network. I cant get it to connect to the network, that part always times out and then I cant carry on with the set-up. It just asks for me to try again. EDIT: Ok so this is because there is no internet access. If you just close the app (ignore it saying you'll be cancelling the setup if this appears) then it actually does work. Right now I'm connected to the drone through the extender. Now just gotta test the range increase :P

[@MrEye4get]

Same deal with my setup. The blue light comes on but the app fails to complete; because it can't see the Internet?

[@TikoyTV]

Same here

[@TikoyTV]

@@MrEye4get i kep ttrying and made sure the phone didnt connect to another wifi. in the end it said failed but the repeater showing a blue light and it worked!

[@BionicRusty]

Thank you so much for this video. I have a Tello and one of these repeaters coming soon. Can’t wait to try it and because of your video I know I’ve got a good chance 😃 Have a great day and keep up the great work.

[@berkcan3475]

thank you so much every video they say connect tello to mi repeater but doesnt explain anything so this helps a lot

[@GadgetInspector]

Glad it helped.

[@beachcomberflotsam1673]

Very good. I have a little different repeater but your video cleared the way for me to “get it” ! Thank you

[@GadgetInspector]

You're welcome!

[@hkitm]

Thanks to this tutorial, I got it to work! (The 1st time I did the copy step, the light didn't turn blue but the 2nd time it did!)

[@GadgetInspector]

Awesome, that's just what I want to hear.

[@jclust]

Good thing you did it the 2nd time you explain you had to connect to quad first before you do the connection to the xiomi app...Thanks great video..

[@esuohdica]

Jesus that was complicated!! I needed the help of another video as well, but we got there in the end! Thanks dude

[@GadgetInspector]

Glad you finally got it. Enjoy!

[@patlooson4644]

🔴This was most helpful. Thank you! Otherwise to understand the complex Chinese software is a big irritation. Like anything from China, the hardware is good, software sucks. Simple straight explanation in the video helped a lot.

[@GadgetInspector]

Glad it helped. Instructions could definitely be better on a lot of these products.

[@klopossa2]

@@GadgetInspector yea..surely they could do this if they wanted. Maybe they are frowned upon by their peers if they cater to the Americans too much..don't get it. So many other Chinese products with great support.

[@craigschumacher7544]

This video is stored in my library and once again proved helped me fix my inadvertent password mistake.

[@GadgetInspector]

It unfortunately looks like the Xiaomi Mi repeater is no longer available. I have not used it, but based on the research I've done this one will work as an alternative: amzn.to/3fFMrUq. If enough people like and/or respond to this comment I'll go ahead and do a setup tutorial.

[@GadgetInspector]

I'll try to provide updates in the comments as folks let me know about them. Xiaomi has updated this app a few times since I made this video, so some things have changed. Please check the comments below for updates. A couple of viewers have been getting errors even though the connection was successful, so as long as you see a blue light you know the repeater is connected even if the app gives an error.

[@CardsNSleevesTCG]

1:12 Damn I thought you dropped that wifi repeater back into place so nicely, but got dissapointed when it was just an edit

[@GadgetInspector]

😂

[@Bergwacht]

You literally saved my ass dude, I didn't realize that the tello didn't appear in the xiaomi app if I didn't set a password...THANKS!

[@JoneRich80]

Got it to work (eventually) but it's worth noting that the app shows an error once it's copied the Tello signal. My app said that it was "out of range." If you go back once you've received this message then all works fine. As soon as you see the solid blue light and the Tello_Plus wifi is available then it's worked

[@bensvideocollection]

Thank you so much! I had read in someone's review on Amazon, that you had the best video for explaining how to set this up. I followed your instructions to the letter and it worked beautifully. Who would have thought it?!! Great job!

[@GadgetInspector]

Glad to hear the steps still works. Xiaomi updated their app since then. Thanks for the feedback!

[@bensvideocollection]

@@GadgetInspector it is a little different but the basic steps still work.

[@myskyviews]

Awesome thanks, I was able to set mine up following the instructions, now just need to do some range testing as I was only testing it at home.

[@GadgetInspector]

Great to hear! Glad it helped.

[@1safariman]

Great review and demo I already set mine up way back but will save this to my favourites to jog my memory if I ever need to do it again 👍's up

[@audigit]

Thank you sooo much. You have a voice for radio, and radio we all need to do this. Thanks.

[@GadgetInspector]

Thanks, I appreciate that. I have been toying with the idea of doing a podcast.

[@audigit]

Very nice. Thanks

[@Kana7782]

Oh man! What a hassle! But thanks! Even though I was getting a timed out message, I still got the blue light and a connection. Thanks again

[@GadgetInspector]

Glad it helped!

[@RRLouis]

Thanks Gadget Inspector for this video to set up the repeater! Only KZbin video that explains it so well that it actually was easy! You asked the question about not having to enter a password when re-assigning a non-hyphenated name to your Tello: Well, after I typed in my new name for the Tello, I pressed into the password field and a blinking cursor appeared, but I didn't type anything, I just hit OK. A dialog came up asking me if I wanted to use a null password, and I said OK! That was that. After rebooting my Tello, the correct name came up in my WiFi choices and all was good!

[@GadgetInspector]

Awesome! That's just what I wanted to know. Thanks for sharing.

[@rbmwiv]

Tip I found out for better video, when connected to the Tello dont connect to wifi first. First open the Tello app and click on connect and it will open WiFi and connect. I use the same repeater. I have been getting better video quality by opening the app first after plunging in the booster cut the Tello on then open app and go from there much less dropp out with the video. Great video keep it it up.

[@GadgetInspector]

Thanks for sharing the tip.

[@rbmwiv]

No problem. Keep up the good videos!!!!

[@quartelli]

Thank you for this, excellent explanation on how to connect even with the new Mi firmware I managed to figure it out. Thank you so much.

[@GadgetInspector]

You're welcome!

[@terryrlowe]

Very nice job! I think even my wife could have set it up with these directions!

[@GadgetInspector]

Lol...

[@GUYBITTON]

2020 and still works great!!

[@GadgetInspector]

Awesome, so glad to hear that.

[@SkunkWorks2001]

Thank for you absolutely perfect instructions. I've been struggling with this for awhile and thanks to you, I was successful :)

[@GadgetInspector]

Excellent...glad it helped.

[@AllenSchmidtSr]

Yeah! Finally! Got mine working on Android. Thanks!!!

[@GadgetInspector]

Glad it helped!

[@mrbg55]

Really helpful - going to be using this with my Osmo mounted on a cable cam, so thanks for getting me a head start

[@GadgetInspector]

Glad it helped. Thanks for watching.

[@pegcity4eva]

good tutorial, just an FYI for people with the DJI spark the Mi 2 will never actually connect to 100%. The app will always time out. It will still clone your settings but it won't offically work. Its annoying because it works but you will not be able to change it to wifi repeater mode in the app

[@Truangel777]

Hi GI...still relevant and excellent video in June 2020! Going straight to buy you a coffee for the time I KNOW this video saved me. Thankgiving for the wise counsel. Peace.

[@GadgetInspector]

I got it my friend...blown away by your generosity. Thank you so much. God bless you.

[@3dprintwiz378]

Just bought a zerotech dobby drone online today. I also bought the wifi extender. Hope this works so I could get a longer range on my drone.

[@GadgetInspector]

As long as it uses a 2.4ghz wifi signal it should work.

[@markpurifoy9881]

H ey gadget inspector you said if you can connect without changing wifi name and no password ....to let you know I did and learned it from another you tuber I follow Quadcopter 101 he did it on his channel.... maybe they updated the repeater????? just thought I would let you know ...... your still my favorite reviewer on you tube...

[@GadgetInspector]

Ok Mark, thanks for sharing.

[@stefanengstrom9732]

Thank You for the instructions. They were very helpful even though I am an Android user.

[@GadgetInspector]

Awesome, I'm glad to hear it works for Android as well.

[@jkartouche]

Thank you for taking the time to put this video together, I really appreciate it!

[@GadgetInspector]

You got it, glad it was useful.

[@ericacae]

Thank you this would have been very hard without you.

[@GadgetInspector]

Awesome, glad it helped.

[@1mrstacey53]

Inspector: That's OK - thank you for your help to one & all!

[@rfknapik]

Thank you for this video. I'm going to try this with the Fimi x8 se 2020 once I find a portable 5ghz repeater.

[@stevenshackelford1937]

I'm brand new at this... so my question is - what do you do with the wifi repeater now? Does it hook into/onto the transmitter? Nice video. Very seldom is much said about the 2.4/5.8 wifi signals and knowing which phone had which signal to work with the FPV camera feed. Thanks for sharing.

[@GadgetInspector]

I usually just place it on the ground or if there's a table next to me. I angle the repeater so that it's facing the direction I'm flying the Tello. I did a test flight a while ago here: kzbin.info/www/bejne/namyhn5pmJWVf6c

[@DavidReynolds-kr6yh]

Thanks for that, I have the tello, and recently got the xiaomi wifi extender and was wondering how to connect them.

[@GadgetInspector]

Glad to help. Thanks for watching.

[@Bionic_Rob]

Thanks Gadget inspector. Will be trying out your steps very soon. Will also let you know if there are any surprises. I have the equipment required as specified. Will let you know how I get on. Also interested in the DJI clone copter in this video. Will see if you have a review on it in your KZbin videos. The Tello is my first drone. I wanted something that wasn’t too expensive in case I lost it.

[@GadgetInspector]

Hope you like the Tello, I really do. This should help reduce if not eliminate all of the video skipping.

[@GadgetInspector]

Here's the Spark clone review: kzbin.info/www/bejne/d2GanneAdpZsf7c

[@Bionic_Rob]

Thanks, don’t want to get too carried away with all these gizmos. Will set up the repeater tomorrow. Yeah the video and poor range are a pain. Wish they had of done the job properly in the first place. Anyway life is full of suffering so I’ll have to go with it. Great videos by the way, clear and fun as well. Cheers Rob

[@Bionic_Rob]

Hi Gadget Inspector, I said I would get back to you about the Wi fi extender. Happy to report all up and running with the WiFi extender. The Xiaomi app has changed slightly (as apps do). However, told it we were in Beijing and I saw the correct Wifi repeater. Anyway all good. Got 2 repeaters and configure one to extend the home wifi as well as the Tello wifi. Now buying the Game Sir t1d blue tooth controller for the tello. Also thinking about buying a drone for producing good quality videos of scenery. Looking at the Parrot Anafi or a DJi Mavic air or maybe Mavic Zoom. Interested in preprogrammed flights with waypoints already defined. Interested to hear what you think if you have the time? Cheers Rob

[@23ambrose1]

Thank you so much for the Xiaomi setup help video. Mine now works as advertised.

[@GadgetInspector]

Excellent, glad to know it helps.

[@stevebillman4191]

Good job! Some screens were different in the mi home app on my phone (android S9), but essentially the same. Followed your set up and all is well. Thanks.

[@GadgetInspector]

Excellent, glad it helped.

[@slugosrc1256]

Great video I have a repeater like this and can't get it to work I'll try your way tomarrow Thanks Rich

[@GadgetInspector]

Let me know if you get it to work. It can be finicky with all of these darn steps.

[@alexanderbloemers570]

Excellent video! This Made it so easy for me. Would not have been able to manage otherwise! Thanks

[@GadgetInspector]

Glad it helped.

[@SuperBoytech]

Huge Huge Huge Thanks.. I tried a couple of videos.. Only did i get it after this,,,

[@GadgetInspector]

Awesome. Glad it helped.

[@CustomMotovlog]

Thanks for the video it is very useful, the app isn't very intuitive an it was very helpful!

[@GadgetInspector]

Glad it was helpful!

[@peterkaikko7565]

Thank you so much for your very excellent step-by-step instructions. You rock!

[@GadgetInspector]

Glad it helped. Thanks for watching and commenting!

[@glennk682]

Very good info. Waiting for the same repeater to arrive and will certainly use your guide. Thanks 👍

[@GadgetInspector]

Thanks Glenn.

[@Kel_Joy]

Worked great! The app has been updated a little since you made this video but I was still able to follow your instructions. Thank You!

[@ashann50]

Thanks for such a clear and easy tutorial to follow

[@GadgetInspector]

You got it Geoff, glad it helped.

[@mikrodronefiendvideos5612]

thank you. that helped a lot, i never would have picked mainland china.

[@GadgetInspector]

Glad it helped. Thanks for watching.

[@stuartwoodward4297]

Thanks for this. Messed up the password connecting to the Tello. To reset the drone. turn it on, hold the on button for 5-8 secs until lights go off. That should reset the drone allowing you to try and do the password again.

[@GadgetInspector]

Yep, great tip.

[@TheJoeWentzProjectTV]

Thank you so much for the information!! This helped me immensely!! I hope you have a great day!!

[@GadgetInspector]

Glad it helped. Thank you for watching!

[@scream2749]

first off, great video, got mine working, but didn’t extend range or make anything better infact it made the rage shorter, so far my tello has been a complete waste of money sadly, should of got a spark

[@GadgetInspector]

Hmm, sorry to hear that. Very strange indeed.

[@greggill971]

Can I use the radio controller that came with my Hubsan H216A along with the Xiaomi WIFI extender without any problems? Love your videos. Intelligent, to the point, entertaining and helpful.

[@GadgetInspector]

You made curious Greg so I just went out and tested it and as I expected there seems to be more lag in the controls. Especially when I flew out a little bit. Guess I wouldn't recommend using it; seems like the bluetooth and the boosted wifi signal aren't playing as nicely together. Now, it could be in my head because I haven't flown the H216A in a while, so give it a shot. Keep it pretty close and test it in a wide open field or something. Thanks for the kind words as well.

[@benherr2736]

Thanks so much for this great "How To Video" I followed right along and all is well. I did look at a few other charnels that did the usual "Just plug it in and turn it on BS" to no avail, what a surprise. Ii really apricate your time and effort to make this stuff understandable. Ben Herr

[@GadgetInspector]

Glad to hear that Ben...that's exactly why I make these kinds of videos. If I have trouble with something and I can't find good info on it, I know others are in the same boat. Thanks for the feedback.

[@DanWhitacre]

Very good explanation, seems easy. I will wait for you flight test videos to see if I want to order one, especially if the wifi video signal improves.

[@GadgetInspector]

Thanks Dan. I'll be testing it out soon

[@Angel-jh8fu]

Hello mate! Thanks a lot for the video. It was really helpful. Thank you very much for taking the time to make it. I couldn't find any other useful way to set up my devices. Thanks again and keep up the excellent work

[@GadgetInspector]

Awesome, glad it was helpful.

[@sc4r4b]

Thanks! Your instructions still apply today (7/2019) with the most recent hardware mifi2, mi home app, and up to date Tello firmware. Note I selected “China” as my location not Mainland China or Beijing. I did use a password on my TELLO WiFi.

[@GadgetInspector]

Good to know it’s still working. Thanks for the update as well.

[@Seerwealth]

OUTSTANDING lecture. Be Blessed.

[@haisty]

Amazing video! Thanks for the instructions.

[@GadgetInspector]

Excellent, glad it helped.

[@shoffmann70]

I just ordered the Mi wifi 2 range extender. I'll be using it for two things: extending the range for wifi drones, and extending the wifi range for my tablet and phone while using the Kitbeez X2 mini true wireless earbuds out in the yard.

[@GadgetInspector]

It'll definitely work with your drones, but it won't help your earbuds unfortunately. The buds are using bluetooth rather than wifi.

[@shoffmann70]

I meant to state that I can move my tablet/phone further out in the yard, and keep the tablet/phone within 15ft of my headphones. I notice that the X2 buds keep a solid signal within 15 - 20ft of music source. Thinking of upgrading to Treblab X5 or Soul X-Shock buds after I get my new car tires. Bluetooth headphones provide more freedom for yard work or going to the gym - I love 'em!

[@GadgetInspector]

Oh yeah...if you're looking to upgrade I can definitely vouch for the X-Shocks. They are my absolute favorites and the first ones I grab. And you're right, wireless is perfect for yardwork and stuff; you don't have to worry about wires getting caught and all of that. I understand taking care of the vehicle too, we'll be getting tires for my wife's car soon as well.

[@nickandersonco]

You're the man! Thanks for the help.

[@tomislavmihovic3783]

Just tested. Must have ithem for TELLO. The image on the smartphone is much more stable and the distance is greater.

[@GadgetInspector]

Glad it's still working after all these years.

[@Earle63]

Your instructions were spot on. Thank you sir!

[@GadgetInspector]

Excellent, glad it helped.

[@lairdbufflehead]

Great video. Could not have set this up without your help. Thanks. 😄

[@GadgetInspector]

Excellent, glad to hear that.

[@jamesm9560]

Ohhhh you have to connect the Tello App to the phone first Then try to find the Tello Plus named network with the MiHome app. Then it works.

[@odabax]

Ty Bro! Great vid ;) Now its working thanx to you! I'llshare your video on several forums ;)

[@GadgetInspector]

Wow, glad this vid is still relevant after all these years. Thanks.

[@JWadz]

Great video with very clear instructions. Thank you.

[@GadgetInspector]

Awesome, glad it helped.

[@valentinshantarenko5378]

Thank you! Works

[@GadgetInspector]

Glad it got you all set up.