Rainbow E2 Black Vacuum Cleaner Cleanup and Tear Apart Video

[@kirbykid63]

Again Graig just want to thank you for the informative video on opening the power nozzle.

[@erasetheyears]

Hey great video, really enjoyed it. I hope you will make a video of how you clean the hoses on these units one day! I know you gave a nice description of how you clean the hoses but still I would love to see it in action. Super satisfying to see all that gross grime cleaned away!

[@vancemccoy]

This helped me sooooo much. Thank you, you gave me the confidence to dig deeper into my Rainbow than ever before.

[@gagainer]

I'm so glad!

[@jordansaltou8560]

@@gagainerhow did you do the foam part?! HELP!!😭😭😭

[@jeffkalbfleisch4847]

Thank you. I got a rainbow e2 given to me and it's got some issues, but I wouldn't take it the the repair shop as nasty as it was. The one you had was perfect compared to this one. In fact I think it got used then stored in a shop or something without getting cleaned. Lol, but with your help I was able to clean it up nicely and now I can drop it off to have the switch removed and a new heppa filter and I think it'll be ready to go. I'm not a big rainbow fan so I'll probably donate it to a family in need.

[@vanphillips1878]

Thanks so much for this video. I cleaned our vac and it is so much better. I had some trouble putting everything back together until I watched your video.

[@RobloxsWaltDisneyworldTh-uf5tf]

Hey, I love your videos. ( I'm using my son's account). To answer your question, wet dust doesn't fly, BUT... Customers are told upon purchase what I call "the three Gremlins rules" from the movie Gremlins LOL! 1. to never ever vacuum up ashes, sheetrock dust/debree, and powders like Carpet Fresh. They are water insoluble. There is a HEPA filter because of rule number one that 9 out of 10 people never follow LOL and also by law, rainbow has to put a HEPA filter in it whether it is actually utilized or not... just like by law, toasters have to have a warning tag on them to never put them in water. 2. Clean your separator at least once a month if you're not going to do it after every use. It is the life of the rainbow and if it gets coated, it will not work properly. 3. Do not run the rainbow with no water in basin and do not store with water in basin because people leave the same water in, it becomes a sludgy non liquid byt non solid

[@RobloxsWaltDisneyworldTh-uf5tf]

And I wasn't trying to be that guy LOL I do love your videos but I grew up as a rainbow baby LOL my mom got into it in 1980, and I believe she was the first woman to become a satellite distributor (or at least on the East Coast, but i could be wrong). But basically the quality of the rainbow is so great that they have in 10-year warranty on motor or replace the rainbow, and 8 years on parts and labor should anything ever break or crack etc. Also you get $1,000 off when you trade in your old rainbow for a new one. No other product or company offers that. Try to take your washing machine back to Sears to get a new one and ask for $1,000 off Etc LOL

[@Comrade_Asbestos]

I know you guys don’t really like the SRX but it’s actually not that bad now they put a more powerful motor in it and went back to the E2 powerhead. We just did a demo a couple days ago and bought the new SRX and this new powerhead is absolutely insane. Motor is much more powerful to. There’s more airflow now.

[@gagainer]

I’ll be happy to revisit the upgraded version. Excited to see it

[@Comrade_Asbestos]

@@gagainer oh yeah it definitely is a lot better not as powerful as the e2 but the airflow is just as good maybe just a tiny bit worse than the e2 but definitely an improvement over our 96 se

[@alexshatner3907]

@@gagainer Are these Rainbow Vacuums really worth $2500 ??? cuz that's I paid a door to door salesman about 20 years ago

[@JDCrae]

Another great video. I've torn down and rebuilt 3 of these now. All worked great except for one. Gets hot and shuts down after 15 minutes of usage. Brand new motor, new gasket, new separator, new foam insulation. It was beyond nasty when I got it. Only thing original inside was the control board which was dusty was blew it out with a keyboard duster. Motor fires up nicely, not loud etc. Scratching my head trying to figure out what's causing it to overheat. All OEM parts from rainvac too

[@lorenzomcmillan4567]

Thank you Greg for making the video. although i am partial to the Old D2 Rainbow i know the newer models are supposed to be better . but you're videos are very informative i watched the video about the srx and was surprised at how terrible it is . Really like watching all you're videos about all the various vacuums and the performance of them .Keep making videos Awesome Job . and Thank You again for taking my request into consideration

[@jyoungGMAIL]

I worked at Rexair (the actual mfg's of the Rainbow)....and I was in supply chain mgmt. I can tell you during the design phase of SRX -- a couple of major themes emerged -- one was curing known issues or design improvements of latest models, that weren't feasible with existing design and cost consideration. Also was "revolution" vs evolution change. Thus you see some radical design changes, which by nature create new and different (and uknown also) flaws and unintended issues. I think we should have chosen Evolution. The concern was would the market not be engergized by it vs Revolution. I have more insights but thought I'd share that. On the power nozzle I loved the side brushes. They were taken off primarily because major Saudi Arabian Dealers hated them.

[@gagainer]

Thanks for watching I appreciate the kind comments I try to be fair and factual

[@kirbykid63]

Thank you for that very informative video, I have serviced many D4’s and most are clogged with mud.

[@gagainer]

Glad to help

[@kirbykid63]

@@gagainer I have many high end vacuums in storage to be refurbished or parted out in my storage unit many Kirby’s rainbows, oreck, and Dysons sell mostly online.

[@brandonpierce1729]

​@kirbykid63 do you have this vacuum that he is working on in this video?

[@meanyist]

I'm using a 28 year old rainbow and it works perfectly I especially like the aquamate to shampoo and incidentally sir you are quite handsome

[@kirbykid63]

Thank you I just serviced mine and replaced the top fan.

[@diegotoledo7507]

Thank you so much for this! Saved us some money 👍🏽

[@Mollychief]

Thanks!

[@Mollychief]

This video was exactly what I needed to refresh my older e2! Thank you so much!

[@HaroldLeonard-d2n]

Whats best to clean the gasket around the filter (rubber thing)

[@Thuwaizh]

Thank you for this video and I hope you answer my question My rainbow machine is 110volt can I change it to 220 Volts?

[@Reborn_Rover]

Hi, like you videos. Informative. I was wondering if would consider making a video on the Aquamate ll as there is only one video on KZbin of the Aquamate ll system and the gentleman doesn’t say a word the whole video and is constantly putting the camera down so you have no idea what is really going on and what anything does. I’m really hoping that you would consider making a better video. I’m considering buying an Aquamate ll system to go with my rainbow series 2 speed for rinsing and dry passes when I use my Bissell Hydro steam to clean my carpets. The problem with the Hydro steam is I find it leaves the carpets still very wet even after multiple drive passes with it, and the rainbow would do a better job at picking up the water in the carpet, thank you keep up the great work!

[@emilyi771]

Just use your rainbow with an empty basin to pull up the water left by your Bissell steam. Not through the power vacuum attachment, but through the large nonpowered, non-electric attachment. Sorry, i have forgotten a lot of the names for the attachments.

[@PatrickSmithinskinsissy]

Well what’s the best one then in ur opinion?

[@MissMal92]

This was extremely helpful, thank you

[@RosaRodriguez-te7qi]

Hi , I need to know how change the power button in series E

[@UrsulaBarber-g5i]

Can the HEPA filter be washed with water or blown with air compressor?

[@garrettdodson6110]

Does the rubber water pan/motor gasket get glued onto the motor? I’m ordering a new motor cause mine has vibration despite the fan blades being superbly clean. And it doesn’t come with the thick rubber gasket I don’t think.

[@marlam2039]

Thank you for the power head tear down. I'm losing power to the head when I turned to the side. Do you have a theory?

[@mr.zbych1002]

Thanks from Poland

[@gagainer]

Welcome!

[@joncomer6778]

Greg, We have recently started having issues with the handle level sticking, and either not allowing the brush cleaner head to engage the brushes, or engaging the brushes and will not disengage. Any insight into disassembling the handle to review the lever mechanism?

[@JoniGarris]

Where do you reconnect the 2 plugs for the lights, I saw you disconnect them reconnect them, but I cannot remember exactly where to plug them 🤦🏻‍♀️ great video BTW got my machine spotless now, If I can figure that part out to get it back together 🥴😊

[@antoniobatista1758]

Reservatorio

[@antoniobatista1758]

Preco reservatorio

[@ishta]

Hi. I have a single speed E2 series. It just stop working while vacuuming . I inspected the water bowl tab and tested with a chopstick engaging the safety switch, bus still no power. Should I start with the safety switch first or go up top on the main switch? Thanks

[@Dilek7104K]

Thank you so much for this video.

[@tonyablackwell7295]

What is the acid wash you speak of

[@Brightbear_mom584]

How do you take apart the handle on the hose of the Galaxy E2 Galaxy 2000? My trigger switch went out and I wanted to see if I can open it up to see what’s going on? I can’t afford to take it in right now and want to try and fix it myself.

[@gagainer]

is that a rainbow? We dont have a galaxy

[@chelseahaggard9386]

I have taken mine apart and cleaned it. I put it all back together, but now it only works on the side that blows out air instead of the vacuum part. Any ideas on what i did wrong? I did it exactly how you did and had my husband help put the motor part back in.

[@gagainer]

sorry I been away... did you get it back working?

[@felixenriquez1896]

Where can I buy the clip for my D4 rainbow vacuum cleaner

[@susansmith5593]

I clean my bowl often, I want to know if I can take apart the bowl? Where is a vac shop or online?

[@gagainer]

No you can replace they aren’t that expensive from a vac shop

[@lorenzomcmillan4567]

After the comparison of the Rainbow's can the same be done with Kirby?

[@bonitahoward1271]

What is the difference between the E2 and the E2B?

[@brandonenga]

Hepa filter is required for aham certification. Also if i suck up sheetrock dust on an e2 it will get through at the right amount. My srx. 0 dust inside so far from july.

[@paulgekides6608]

👍The hepa neutralizer was (and still is) a smart addition to the machine. Common mistakes by owners are not using enough water and/or not changing the water halfway thru (particularly with dirty/old carpet, little ones in and out tracking in dirt, pets). In both of these scenarios, some dust and dirt will not be trapped in the water bath and will end up in the motor components or out into the air. Also, vacuuming the carpet after doing any drywall work, even a small area, is not recommended since this powdery dust is not wetable. So, by having this third step of filtration in the rainbow, we are letting virtually nothing escape the machine, resulting in fresh, clean, water washed air. Separator-Water bath-Hepa neutralizer is a deadly, 3 way combination against dust and dirt giving you a clean, healthy home

[@trainfan1980]

Hepa filters was mandatory by lawmakers that every vacuum sold has to have HEPA filters on them not much u can do about that. But in my personal opinion, every vacuum lets dust get by no matter what anyone that says that they’re vacuum won’t let dust or anything back into the air is just trying to sell a product.

[@jordansaltou8560]

How did you get the blades off?! Struggling!!

[@gagainer]

take that last nut off and blades stack together.... don't force just gently tug off.

[@sarahburgin3014]

I don’t know which way to try to turn the nut; it is extremely stuck. Tried wd-40. I don’t want to try to turn it the wrong way. Is it traditional, left loose, right right? Trying to hold stem with pliers and turn nut with wrench. Really hard!

[@sarahburgin3014]

I finally got it. Whew!

[@bnickel7398]

I cannot get the power head off and I've watched you about 20xs. I've unlocked. The tabs near the lock move forward manually then the side tabs move toward the center. 1. There's no way I can hold and pull up all 4 at the same time. Pls help

[@gagainer]

did you get it... I use knives on two tabs and the other two pull with my hands.. pops right off...wedge knives in to hold while you get other two tabs

[@unlimiteduactions205]

Hey what do you think of the Fairfax vacuum and have you ever worked on one of those?

[@lisat9707]

How do you get that Knut off to get the fan blades off to clean

[@jeffkalbfleisch4847]

Watch around the 4 minute mark. Once that part is out you put a small wrench to hold the shaft and a larger one to remove the nut. I had two crescent wrenches out so that's what I used but end wrenches are probably best. Note after you get the nut off I had to hold the shaft and twist the fan to work it off. Then I had to do the same with the washer/spacer and the other fan blades.

[@greggreg5935]

Good morning, I have such a question and a heartfelt request to you. I own a Rainbow E2 Black vacuum cleaner. I have taken to cleaning the vacuum cleaner, but I am stuck on taking apart the motor body. The problem is that I can't match the size of the socket (hex) to the size of the screw - standard 6 mm (not enough), 7 mm (too much) Would you be able to help me with the exact size of this screw/socket to be used ?

[@gagainer]

unfortunately I dont even know the size.... if you message cory at house of vacuums in high point nc he maybe able to help with that question..

[@jeffkalbfleisch4847]

It's SAE 1/4“

[@Utahprideboy]

Hey Greg I use grease lightning it’s really good at removing the filth, Are you going with Cory to the VDTA this year?

[@KevinBo2015]

I used brake cleaner power spray.

[@sprayfoam3232]

Dear Greg, what about the bearings, what would you recommend? If we tear down and clean, then it is just a pity to leave old bearings...

[@gagainer]

that is beyond my pay grade... I would consult a tech on that...

[@softgold9430]

Hello. please tell me - what is the price of the original air filter for the model (RAINBOW E 2 Black) in the USA? Thank you

[@gagainer]

36.41$ on www.rainvac.com

[@sarahchadwick6424]

I can’t get the separater off. There is No tool with mine and I have tried socket set, screw driver, wrenches… what can I do?

[@gagainer]

its plastic so if you haven't already use a set of pliers and gently work it off....spray some lubricant on it if you can get it in there..sometimes they have rust on them

[@tinafrancis4942]

I think the SRX power head has a lot of air leakage and it’s brush roll intake area is too big for decent/ concentrated suction pressure. I should have bought the E2 black.

[@terrywilliamson4725]

My vacuum, the same model, only works in low mode. Does anybody have any suggestions on what I need to repair or replace I have already replaced the power switch and that did not solve the problem. Thanks in advance for any help to point me in the right direction.

[@gagainer]

Could be wiring or computer board. I would take to a reputable vac shop for repair.

[@gagainer]

where are you located? What state?

[@Msspanky457]

So on the E2 you don't blow out the motor- you just wipe it? I used my Rainbow to vacuum sheet rock dust ( I know now a bad thing) and I want to totally clean it. Can you wash those 3 discs in hot soapy water (Dawn detergent)? I don't have an acid wash.

[@Msspanky457]

I just got to the motor & my E2 must be a much older model. There is zero insulation/baffling. It has a filter that resembles a filter in a car carburator....very filthy. The motor was on the inside of the filter. What next? Are there discs beneath that?

[@carlosdias3687]

hello I have a rainbow e2 2 speed gold that stopped working today, I saw that it had the power button burned I changed it but it no longer turns on how do I know if it is the motor or the card, and if it is the card there is repair or the card it's cheap you don't send it to Portugal giving me the tips to know if it's one thing or another? appreciate

[@gagainer]

I would contact rainbow direct and have them direct you to an authorized center for service... Most vac shops can diagnose that pretty easily

[@1cfkroll]

Thanks this helped a lot

[@danielozuna9844]

Where can I get rainbow parts , apart from a rainbow office

[@gwendolynmeredith5779]

I gotta go to Georgia to Rainbow store from Tallahassee

[@therealMrSiXtY6]

My trigger is locked after barely sucking up the side of a carpet. How can I get this unstuck please?

[@gagainer]

its prob broken in the handle taking the handle apart you will find the spring or the cheap arm is broken....happens all the time ... if you dont want to deal with it take to a vac shop to help with repair

[@VacMaster2020]

What is your Bench vacuum

[@gagainer]

Filter queen majestic

[@VacMaster2020]

@@gagainer nice

[@fernandasilvagalvao8458]

How I change de fuse of the rainbow?

[@gagainer]

cory house of vacuums of the triad can help with that ... his contact info is listed on alot of my videos...

[@mdmccaskill21]

So when I have motor off and am trying to clean the fan blades what do I use to remove the nut?

[@gagainer]

here is a better video.. I use a monkey wrench the trick is holding the shaft still on top end while loosening the nut kzbin.info/www/bejne/sHKbp6uZmbGpgq8

[@mdmccaskill21]

@@gagainer thank you - I put the stem in a vice grip and then used monkey wrench

[@gwendolynmeredith5779]

How much does it cost if the Rainbow repair man cleans my Rainbow vacumn?? Thank you..

[@karenmccranie3381]

Can I ask a question

[@makaylajones5259]

I inherited a rainbow vacuum from my mother in law I cleaned it but there is water coming out of the heap filter when I turn it on and the motor just sounds weird

[@gagainer]

is the separator on the machine? are you overfilling it? was the hepa filter washed under water.?

[@jesscox3128]

It looks like they ran this machine dry.....gross!

[@REALfish1552]

I bought one of these over priced things and got NOTING in the way of preventative maintenance or how to even clean the part above the water container when finished. I don't even know what the hell the part is called, but it's the fins that spin inside the water container. I know they come out because someone showed me once but I was in the middle of something and can't remember, and have nothing to reference. Anyone have a link to something that shows it?

[@gagainer]

Here you go all the videos rainbowsystem.com/support/videos/

[@PamWosick]

My reset button won't stay in what do I do

[@OutbackTeaching]

You didn’t explain how to remove the rotors… once you get to that part. (You said be right back) & the next scene you was already cleaning. Please help me out -thanks in advance.

[@jasonjennings8125]

I have the E-2 gold

[@PatrickSmithinskinsissy]

I think you should keep ur opinions to yourself about the dust in the areas, there’s always gonna be dust in those areas, even in the D-2/D4, even the old chrome domes. I noticed also there’s no armature or motor brushes.

[@aprilcrawford6439]

Everything went perfect until I put it back together and now it won’t turn on 😭

[@rachelrailey3521]

I think I made an opposie!

[@leontaylor3572]

compressed air

[@shermananderson700]

In spite of your goal to make a quality video,he mic was too far from your voice box so your information was difficult to receive. I suggest you redo the video.

[@gagainer]

Yes... I appreciate that... yes we didnt realize the mic situation wasnt working until after... it will be fixed next time.. thanks for watching

[@zodiacfml]

this product is cringey old design like the other ageing vacuums that are still selling today. this product could easily be replicated with a wet and dry vacuum with some water in it.

[@softgold9430]

Hello. please tell me - what is the price of the original air filter for the model (RAINBOW E 2 Black) in the USA? Thank you