ARM Programming with Embedded C - LED Blinking Using Keil Software

[@VishalGaikwad]

#include void delay(void); int main(void) { IODIR0 = 0xFFFFFFFF; // Configure Port 0 as Output port while(1) { IOSET0 =0XFFFFFFFF; // Make all pins of Port 0 High delay(); IOCLR0 =0XFFFFFFFF; // Make all pins of Port 0 Low delay(); } } void delay(void) { T0MR0 = 100000; // Load calculated count for desired delay T0MCR= 0x00000004; // Stop on MR0 T0TCR=1; // Enable Timer 0 while(T0TC!=T0MR0); //wait until TC reaches the desired delay T0TC=0; // Reset Timer }

[@sankhiptanews9441]

keil 5 has no lpc2148

[@ashilantony6868]

I'm getting error while doing this same code

[@VishalGaikwad]

Do it again from starting

[@judithjohn6230]

How to install keil for lpc2148 please send me link sir

[@VishalGaikwad]

www.keil.com/download/product/ Install MDK-Arm

[@judithjohn6230]

Please provide me program sir

[@VishalGaikwad]

#include void delay(void); int main(void) { IODIR0 = 0xFFFFFFFF; // Configure Port 0 as Output port while(1) { IOSET0 =0XFFFFFFFF; // Make all pins of Port 0 High delay(); IOCLR0 =0XFFFFFFFF; // Make all pins of Port 0 Low delay(); } } void delay(void) { T0MR0 = 100000; // Load calculated count for desired delay T0MCR= 0x00000004; // Stop on MR0 T0TCR=1; // Enable Timer 0 while(T0TC!=T0MR0); //wait until TC reaches the desired delay T0TC=0; // Reset Timer }