🔧Galaxy J7 Glass Only Replacement (FULL GUIDE) - J7 2016

Hi my friends!💜
Nothing to say :3
My equipment:
◉Glass cutting wire: bit.ly/3GiwqkH
◉Heat plate (glass separator): bit.ly/3hNAe47
◉UV Lamp: bit.ly/3GiVLLw
◉Glass cutting machine: bit.ly/3PTnTaU
◉Glue remover: bit.ly/3Vid6YZ
◉Small autoclave (bubble remover): bit.ly/3hX7WUC
◉Big autoclave: bit.ly/3GdQTHj
◉360° Separator: bit.ly/3Gr6409
➥Our service official website: jerrymobile.pl
Join my page👍
/ jerrymobilepl
Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜

[@restinpeacekobe2411]

I learned more of what I need in life in 10 min than all of college and public schooling combined

[@wolfiekersey]

Brilliant, having never attempted anything like this.. I did it first time.. Excellent video, clear and concise. Thank you very much.

Excellent video, clear and concise. Thank you very OK

[@leonherrera2382]

Sos un capo todo los otros tecnicos de telefonos sacan el panel junto con el bidrio

[@Dano-uf8ys]

Not really crazy about the breakneck speed demo for the J7 Sky Pro. A little voice over would be nice as well. The update, is that for the J7 cause I see you demo several models???

[@ahsanshah6831]

yes write

[@celltronix]

i did the same thing with note 2 and it works 100 percent :P

[@fotonick]

Great video. Convinced me that I should not try it myself. I found someone who can do it for $120. A bargain.

[@bryanramirez3075]

why so much not even the lcd cost that much.

[@deansimon8508]

@@bryanramirez3075 right !

[@MJ-rr4hd]

yup its a burgain for who did it.

[@SigmaShorts161]

Is it original display.s touch.?

[@diegolopez89]

el protector metalico del parlante de llamada te olvidaste ! pero que gran trabajo te felicito!

[@VERJULJOR]

diego lopez compa dónde puedo conseguir esos bodrios j7 j5

[@diegolopez89]

se venden salen muy baratos $80 argentinos. pero vi que viene el táctil solo tambien... yo ya cambie 1 pero jamas lo volvería a hacer jaja.. ya me comi un j7 solo desarmando... la verdad perdi todo lo que venia ganando en varios que ya arregle...

[@diegoloja6715]

diego lopez canmuio

[@rajasekhar5675]

diego lopez hhgggyi

[@jonathanalmendras1134]

El J7 2016 no lleva el protector metálico! Saludos

[@JahanZeb1976]

Wonderful.

[@criticalmass04]

Did You did that job for customer, or for Youre self?

[@Dano-uf8ys]

I also noticed you separator was set at 140 degrees C/F? I remember you saying something about 90 degrees C 194 F

[@ineedmymodfixed]

How do you prevent the glue from covering the front facing camera? Or does it not matter?

[@moniquesolomons1567]

Hi Jerry mobile, please could you show how to replace only glass from Sony xperia XZ.

[@Dano-uf8ys]

The. Cleaning solution you used to clean the screen, is that specific or will any solution work?

[@igboanugostephenking2213]

the last option was perfect.. wow thanks man...

[@JerryMobilePL]

Thanks! ☺

[@Dano-uf8ys]

I haven't gotten an answer back yet but I suspect the circuit board it temp sensitive, I know the battery is. I'm wondering if. Elmers clear glue is safe to use in place of LOCA glue.

[@rohitkhan3769]

Perfect sir ji

[@frenchfather5330]

Goog job ! How many milliliters of glue for this, please ?

[@manojvishi1985]

1.5 ml

[@sheivincent]

Can you always see the scratch marks of when you took off the last glass? Cause at the end when the phone is dark I see scratch like marks. Don't get me wrong this beats having to get another phone but if we were to watch movies that have lots of dark night time scenes I'm just going to be staring at the scratches going insane. But that being said thumbs up cause I don't think I have the patience to do it plus I always lose screws 😆

[@YourzTechy]

Please also Include some sound in your Videos ...

[@johnsusila4072]

Yourz Techy what exactly total reassembled?

[@balubhalerao1333]

Yourz Techy

[@gwgaggghshe5426]

hi Tamara loda

[@eddyvideostar]

To: Yourz: He probably speaks no English.

[@alekoldchannel1950]

Get some speakers and play music on them *PROBLEM SOLVED!*

[@santycarp3668]

me salvaste de gastar plata en otro celu muchas gracias

[@Brian7G]

Lo pudiste hacer?

[@cellularshow.6689]

Awesome job done well done keep it up

[@rodrigogallo9902]

Congrats mate 👏👏👏

[@sajidimperial2141]

nice video

[@diomesahaytv5193]

Excellent!!!!

[@vboss5764]

What cleaner did you use after glass removal?

[@asifkhan999]

Nice video

[@sifaxo]

very nice

[@Dano-uf8ys]

Thanks, where did you buy it? The separator, I mean? What about the Elmer's clear glue question.??? What is LOCA.?

[@JerryMobilePL]

I updated video description, please check

[@akhlaqueshaikh1886]

Super sir

[@leonidassantos6831]

What is the temperature used ?

[@mohammadharoon4231]

Good job

[@uttaranchalifilmsproductio4701]

hello sir give me the link of the wire and glue plz

[@AbdulHadi11447]

Great buddy

[@MdTuhin-wp4uo]

wow nice bro...

[@munismunisk9177]

thanks u sir .......i like this vedio

[@ЛинарНуриев-х6л]

What kind of glue do you use? Loca 2500 or Loca 1000?

[@Dano-uf8ys]

I can understand why, you'd remove the battery but why the circuit board? Is it also temperature sensitive?

[@JerryMobilePL]

I don't want to break the front camera, LOCA glue will destroy it so I removed all parts from inside

[@HuaweiPsmart-xh6dc]

What glue do you use to glue the glass

[@Raajshahbaz]

superb idea....

[@اللهاكبر-ح9ف5ي]

Super, bravo.

[@Dano-uf8ys]

Upon a second look, it looks like you left the battery in, while heating the lens. Was that the case, if so why? Batteries are temperature sensitive and can be ruined with extreme temps.

[@AFKtvOfficial]

Terima kasih atas tutorialnya

[@HelpingMind]

helpful video.

[@shubhambady9872]

Best sir

[@TechnoShahSuri]

Nice sir ☺👍👍

[@eldhoselaeoprd9671]

Super. GOD BLESS YOU BRO

[@santiago4945]

I would like to change the front digitizer from the stock white one to the black one and order it from your site. Did you change the glass screen as well? As I would like the logo, back arrow (on bottom right) and windows viewer (bottom left) to appear.

[@jesusbrizuela2853]

Hi there, whats the name for the bolt that u are using to hold the wire while u are separating the glass from the lcd.. the gold one in yor right hand

[@selwynbarreto1584]

What wire did u used sir.

[@dhivaziva]

super, thanks for your video

[@frankwalkery5394]

I have a question, I have a J7 2018 and recently I sent it to repair the display but the glass crashed and began to fall and I have a spare viewer, so I want to know if this process is the same for the J7 2018 and if not there is risk that the display will be damaged by the heat because the part is not original

[@farmanaliali7656]

Thanks bro

[@restinpeacekobe2411]

1.2 million j7 users broke their screens lol

[@altocross6574]

yes I did!!!

[@eddyvideostar]

Colton: Or may have a premonition of such.

[@simply_relaxing_stuff]

Yes ,me too

[@Matt-nx1vs]

Lol

[@saralrasta7071]

thanks

[@rolyjancosalguero4945]

Qué pegamento es el que usas para pegar el glas?

[@JDMACC]

digitizer is the glass and your not heating it enough so thats why your chipping it. Keep device on and if it gets to hot it will shut off automatically so you know its too hot...

[@talibkhalifa6537]

superb

[@kashmira007]

how much will it cost to replace the touch screen of j7 prime mobile

[@alekoldchannel1950]

20-30$

[@ramosryanr.137]

Does it fit with the glass with samsung galaxy j7 2017?

[@SaiSai-kv3ih]

what water you used?

[@الحاشدي-و6ش]

مشكور

[@grungelover3502]

Can we do it without disconnecting the mother board?

[@mehmedhyuseinov4626]

Do you not use the double sided tape to protect sensor and front camera?

[@joseluisacenaibanez1577]

Ññlb u

[@somratsalauddin203]

Nice

[@talibkhalifa6537]

right repair

[@bakedpotato1744]

Does anyone know how to do this on the J7 Prime 2017? (J727T1)

[@javierzegarra5813]

a cuantos grados trabajas para no quemar la pantalla??

[@diegotomas9759]

Does this phone worth now?( Should i buy it?)

[@narayankumawat5582]

aap ki shop kaha pe he me rajasthan se hu mere j5 prime ka glass dalna hai kitna kharchaa aayega

[@tayyebrajput3494]

Sir mera on8 bhi same demej hai par vo upar sai girnai ke baad thoda bend ho gya hai sir kya vo theek ho payga

[@Steel-Pinnings]

Why do you have to take the whole back and guts out of the phone to heat and pry off the glass? Just seems to be a lot of work to not mess with other than take apart and put back together after the glass is back on the front. The only logical explanation of why is the heat to loosen the glue will mess with parts inside.

[@CoffeeNo0b0514]

Answered your own question... Lol

[@drewevans8680]

@@CoffeeNo0b0514 hahah ikr!

[@eddyvideostar]

​ @@CoffeeNo0b0514​ : FJ Killer: This a wonderful example of self-mussitation and soliloquy.

[@kellie77381]

eddyvideostar You could also call it 'talking just to hear yourself speak' or in this case typing.

[@SalvadorMulgado]

buddy!!! what is the name of the liquid you use? please BLESS

[@JerryMobilePL]

jesus salvador galindo mulgado It's LOCA glue :)

[@SalvadorMulgado]

Jerry Mobile wow!!!! foreal? looks like a another thing!! if a change my digitizer I need put the liquid obligatory? or what is the use? Thanks for answer me

[@dixielandfarm]

For best results, yes. But you need a UV light to make it harden correctly. If you are accident prone and drop the phone a bit, using 2 sided tape (in most kits) makes it much easier to remove any new screens in the future, but dust CAN get trapped underneath eventually. My wife tends to break her screens twice a year, so I don't bother with the LOCA glue, but that DOES give the best results, as you can see Jerry Mobile do.

[@SalvadorMulgado]

dixielandfarm thanks a lot my friend you help me so much!!

[@deemonmeister]

B-7000

[@pratapchatterjee4184]

Thank you for the info.

[@rishirishi2292]

Sir any data loss?

[@gymmotivation3553]

Good

[@nizarvpm]

What's that tool he is using.. Heat air gun??

[@RamKumar-hd3jy]

nice

[@gianfrancoramundo4853]

BRAVO OTTIMO LAVORO

[@justpassingthrough9887]

Just what I wanted to see. Can I just set the phone outside instead of having to purchase a UV light?

[@untitled8513]

yes

[@oskibila3938]

question: I bought a new complete screen. I disassembled the phone and removed the broken screen. I assembled the new screen WITHOUT REMOVING THE PROTECTION AND WITHOUT ADDING GLUE ONLY TO CHECK IF THE NEW SCREEN WORKED OK. THE NEW SCREEN WORKED PERFECTLY. I disassembled everything again and assembled it, this time REMOVING THE PROTECTIONS. I DID NOT ADD ANY OTHER GLUE ON THE EDGES NOR ANYTHING ELSE. Now the screen isn't working. On the left everthying is white and it doesn't respond to touch. What is broken, the new screen or the motherboard or something else?

[@LucasMartinez-mu1uj]

Es un j7 neo? Xq es similar. Y quiero saber si lo podria acer en un neo

[@horacioaguerocerda7219]

grat job!

[@cristianguillermotejerina5781]

Q likido le echaste cuando pegaste la pantalla?

[@es_viernes]

Me pregunto lo mismo

[@chrrlees]

What kind of gue u Use to glue the glass and the touch pad

[@bharath7684]

Do u do glass only replacement for micromax canvas mega 4g q417

[@ahsanshah6831]

so so mfunny

[@thanh_hue719]

hi anh em ở việt nam muốn mua vật tư và dụng cụ thì nên ở website nào ?

[@Nasdaq-pi4tk]

Who else checked their volume 😂😂

[@littlemadness221990]

I was restarting my laptop :)))))))))

[@knowledgehubfacts4537]

haha

[@rithirithi5709]

Price for replacement plzz tell me...😢😢 Iam broken

[@rajag3003]

Lenovo p2 p2a42 mobile ka touch+display+LCD hai Keya ?

[@adarsha267]

How much is that glass

[@swapnilkadam5016]

Samsung Galaxy j7 next body replacement kidar milegi

[@shobhacherian0493]

It happened to my J6 galaxy phone a week ago. Never the phone had fallen or dropped. Not a single scratch on the body of the phone. Warranty period is upto December 23, 2019 but the authorised service center says it is out of warranty and phone has impact damage internally. I doubt it is manufacuring defect, my helplessness is exploited by the vendor in Kottayam i.e. QRS Retail Ltd supported by the service center and the Samsung manufacturer.

[@rajeshkumarmahato2470]

glue name & last times white color which machine use or not

[@BIPINKUMAR-gs4ht]

Sir kitna paisa lageg j7 prime ka touch change karwane me Please reply sir

[@dilarafirstsmartzone583]

go ahead

[@NageswaraReddy19]

Hi bro my panasonic Eluga pulse x outer glass is broken so where can buy it please help me

[@kempachyplay9818]

hola jerry q liquido le pones ?

[@eSelekt]

We repair this model with oca glue. You can see on our channel