Galaxy Note20 Ultra 5G screen FPC connector replacement

Ebay store: www.ebay.co.uk...
WebSite: sorinelectroni...
Patreon support: / electronicsrepairschool
KZbin Members: / @electronicsrepairschool
Forum: forum.sorinele...
Discord: www.sorinelect...
My tools: www.amazon.co....
PayPal me: www.paypal.com...

[@Matsuiiiiii]

Hi Sorin, I realy like your black piece of carpet with the red outline. Is seems quite heat resistant. Could you please share a link where to buy this?

[@zmagomah]

He got it as a gift..😍

[@techtronics7]

Haha 8/10 😂 This is like 11. The components are so small and you risk burning them.

[@HectorLopez-jw2ke]

Sorin Says: You never see Me clean and change solder with low melt. Great job and the best for you.

[@ToFixPro]

Great job i'm doing the same technique for FPC connecteur 👌

[@JinCola1001]

Excellent Remove without flux or rosin.Great Skills👍

[@RK_MOBILE_REPAIR]

Finally After Long Time i see A Good Microscope Video Quality on your channel ...😍😘

[@MisterBlack83]

Sorin, where and when do you stream ? Id love to join in a stream but all I ever see is your coffee time livestreams on youtube!

[@gadgetfixup1628]

Excellent job as always. I tin the new connector pins with a bit of solder to give me a little extra cushion for connection. Just a suggestion, I was getting nervous with that second reheat on a sandwich board. 😅

[@elberttanner6189]

I concourre.

[@mikeh6286]

Excellent content. Thank you very much.

[@ridethefog]

Like you always say: Beautiful!

[@rfr653]

Good job mate 👍

[@Leon_George]

How weirdly convenient, I've just bought one.

[@johannesdesloper8434]

Well I'm not such a solderexpert as you but I think I can say I have 4 decades of expierience. What I learned I think that it is very important not to stirr or vibrate de solder during solidifying. it will appear as a dull surface and is much more britle. I remelt dull solderjoints.

[@icommandoi145]

Was curious what you used to glue the back frame and your method with the claps to complete the repair.

[@Aneesh.Asokan]

It's most likely B7000.

[@corel965]

there is a precuted both sided tape that goes around frame nothing special :)

[@MrRvdbeek]

This a great job did burn the plastic always so I need 10 pieces to fix it😂

[@moutiayahyaoui2509]

maybe there's a monster inside 😂😂 love ur vibes god bless u

[@emojeljohn]

i have the same phone note 20 ultra 5g it just stopped displaying my itself but didn't fall down or in water, the flexy and socket seem okay

[@sadiqtv307]

Good job sir

[@davidbolha]

@ 13:51 Would like to know THAT USB charger (with the LED LCD display) which one it is (& where to buy). 😍🤔😏

[@hamzatayawe1083]

تحياتي لك صديقي سورين فقط ملاحظه صغيره استخدم قصدير سائل منخفض الحراره حوالي ١٤٠ ممتاز لهذا نوع من التثبيت انا استخدمه في صيانه الايفن

[@HectorLopez-jw2ke]

Great example of When to chang solder

[@KingHenrycruz]

Please 🙏🏽 where can I buy the connector from!!? My Note 20 Ultra's connector suddenly went bad too

[@lltm2856]

Does that solve touch issues after it got wet ???

[@Gabriel.Chiriloiu]

Salut. De care cositor ai folosit? Cu plumb sau fara?

[@aechtabayer5434]

NIce video. I have a problem with my A21s now. ive done the old connnector out and bought 5 connectors to try myself again...... so the problem is using flux the connector wouldnt bound with the fresh applied solder. i heated the board some minutes before placing the new connector. Anyone any tips?

[@theKURDIZHPRIDE]

Is it posible to charge the phone with the wireless charger even tho the Connector is broken

[@BigPackets]

nice vid. what air speed do you use on the hot air?

[@12345678904151]

How much for this service?

[@lnglng6961]

❤

[@rmservices9367]

its Sorins Connector

[@Satirefields]

hi there sorin, I was just gonna ask how could I identify neither a bios chip is broken or a PCH and CPU is shorted? 😅 thanks

[@supernova1163]

There are videos about that

[@Satirefields]

@@supernova1163 thanks, im having very big doubts its either the SIO chip or the bios chip (the bios chip pads were broken as I was removing the IC with a 200° max. hot air)

[@winlose3073]

I think solder paste might be better and easier for this kind of tiny soldering right?

[@srikanthkanth3224]

sir im from india can u send 2fpc for note 20 ultra not available in india i will pay money

[@kadmaster]

Come to Beşiktaş,Sorin..

[@omersayli]

Does he know the Beşiktaş :) It is a football club in Istanbul, Sorin.

[@kadmaster]

Ofcourse, He knows...He's big fan...@@omersayli

[@winlose3073]

how to know it's gonna be lowmelt before you buy it?

[@corel965]

You have a melting temperature written on pack like 180c 220c etc... :)

[@winlose3073]

problem I've never seen a temperatuer rating on them here in my country I might be looking in the wrong place thanks for the info👌👍 @@corel965

[@lucabarbolovici4974]

Noice

[@geovani60624]

next time remove the camera modules please xD

[@acalat]

Why you start to pay viewers for your lessons repair.

[@dazzkhan2299]

Sorin can please instead of skip some of video..use FF so we can learn every single thing.

[@marphymarphy]

I love the way You speak about devices...Ooo, we have a niiiice laptop, niiice board, niiice phone, i was expecting we have a niiice new battery😂😂😂It is so typical for You, that it is strange If somebody say the same sentence😂And finally...Great job like always😊👍🏻

[@Evhen_Velikiy]

Для такої роботи я зазвачай використовую станцію нижнього підігріву. Це значно прискорює роботу.

[@RobertHlmNL]

Solid. Solid. Solid.

[@dweijers2193]

Nice job Sorin, well done.

[@ayubtechke4294]

Do more phone repair video Sir🙏

[@MP-yt4cx]

300 degree and heat it from the bottom ....

[@exooooo9122]

yeah that what we do normaly but in his case he can't.. bcs at bottom is shield cover and under it it have chips

[@sergioperez-wt9tw]

fantastic work,very clean,,congratulations

[@Rodriguespsyify]

5:22 this flux would be with isopropyl alcohol. ?

[@rifatahmed4659]

1st time in past few year sorin wicked before soldering 😮

[@lucataszarek8782]

Hello🤝good job👍👍👍👍👏👏👏👏👏👋👋👋👋👋

[@Maciej.R.]

Ostatnio tak myślałem żeby jak lutuje się takie rozproszone i ruchome elementy. Użyć czegoś w rodzaju wybrujacego patyka. Wysoka częstotliwość wibracji spowoduje że cyna i nóżki przełamią opór powierzchniowy cyny.

[@wisher21uk]

Brilliantly done Sorin thanks 😊

[@padmalalmunagamage466]

Excellent, subscribed

[@teslasapple]

Smooth

[@aliemlek]

👍👍👌👌

[@cimogt7857]

Nice job👌

[@mbaymahubert1656]

Amazing work sir

[@omersayli]

nice work

[@Hejazi1365]

Why didn't you beat the connector from the other side of the board?

[@lablackzed]

You can't because there is a chip there didn't you see the shield.

[@gulmulmiah1919]

@@Hejazi1365 What wire is this that you can use.

[@Kalma-cn]

i rarely see u soldering plastic connector from the top. how much temperature ?

[@t_Gecko]

he said he was using 180°C low melt solder, so probably around 200°C

[@EsportsTVs]

plastic connector lower than 240 degs

[@modorangeorge4991]

@@t_Gecko 183C is regular pb solder, not low melt solder based on bismuth or indium, just regular solder.

[@exooooo9122]

​@@modorangeorge4991 true but still regular pb solder melt around 180-190 when i search for fabric soldering it give this : Solder Temp.:235±5℃ Duration: 5±0.5sec i guess this is the safest temperature) but on my Tinol it giving 190 temperature of melting but suggestion is 340 - 420°C

[@ovidiuovidius]

Salut Sorin, ce fel de tester charger folosești? FNIRSI de care? Mulțumesc!

[@atoms1978]

🇷🇸❤️❤️❤️❤️❤️🇷🇴

[@ArthurTugwell]

What flux do you use please?