🔧Galaxy S9/S9 Plus Glass Only Replacement - home solution📱Success💪

No freezers, no laminators, repair done in home conditions 💪
Please turn on subtitles for English :)
My equipment:
◉Glass cutting wire: bit.ly/3GiwqkH
◉Heat plate (glass separator): bit.ly/3hNAe47
◉UV Lamp: bit.ly/3GiVLLw
◉Glass cutting machine: bit.ly/3PTnTaU
◉Glue remover: bit.ly/3Vid6YZ
◉Small autoclave (bubble remover): bit.ly/3hX7WUC
◉Big autoclave: bit.ly/3GdQTHj
◉360° Separator: bit.ly/3Gr6409
➥Our service official website: jerrymobile.pl
You will need:
- new glass
- metal handle tool (available in repair kit)
- heating platform (LCD separator) or hair dryer
- LOCA glue
- dispergator (used when separating the glass and for cleaning the screen)
- UV lamp or not if use glue from kit
- 2-sided adhesive tape
- tools like sucker, opener and screwdriver
Join my page👍
/ jerrymobilepl
Subscribe for more videos 😎
Comment if You have a questions 😊
Thank You💜

[@jillhoskins9966]

I don't what language is being spoken on this video, but it is MESMERIZING!!

[@OPapplerepair]

Wow very good,👍 the simple solution, but super,, im still searching the tutorial, and i wanna try your tutorial. Thank you🙏

[@salehsmart7561]

Perfect u are a hero

[@jettic08]

I am seeing the indents of the battery when i put the loca glue! Am i putting to much uv glue?

[@cryptomma6200]

Hej, czy LOCA 1600F również się nada, czy musi być raczej 2500F, czy wszystko zależy od tego kto z czym woli pracować?

[@vaithan3481]

Hi Jerry. What would you call that IPA dispenser you used to apply the toothbrush with IPA? I'd like to try to get one. Thank you :)

[@DeltaDawn22]

Geesh I was optimistic about doing it myself but after watching this video I'll have to cough up hundreds to fix mine! ( I just got mine 3 Month's ago!) 😢

[@CharlesEDarko]

Sad story

[@jaykay8295]

You cry and I will play violin

[@megatradetz]

Hey dude that is awesome i also using loca uv glue 2500 but i use it to fix tempered protection glass on any phone :D i make some videos about it you can try it dont pain just fix it forever :D

[@bestbroseph1258]

ok so a tip, you dont need a freezer, pick up some dry ice at your local publix or other grocer. works just as good, and you can just let it evaporate when done. that way the glass comes off in one peice

[@Swenser]

I dont think dry ice is gonna work on s9. Needs colder Ive heard. Would make a great youtuber if you can show dry ice method working

[@StarmanDX]

this doesnt seem *too* unreasonable. i will need to buy the uv light thing which hopefully isnt that expensive. wish i took advantage of sprints offer

[@bryceoslie4568]

Thank you for the video

[@michakobiaka6420]

Wielkie dzięki za poradnik i zmotywowałes mnie tym samym do samodzielnej wymiany szyby w moim s9 plus. Serwisy wołają 650 700 zł za wymiane a są to koszty używanego ekranu wiec ryzykuje nie dużo, a jak sie uda to za 100 zł mam naprawiony telefon☺.

[@JerryMobilePL]

Masz rację! Życzę powodzenia :D

[@adriann2005]

Więc na Pana miejscu, Panie Michale otworzyłbym serwis i robił taniej. Wtedy też chętnie bym skorzystał z Pana usług:)

[@adamwitczak1249]

I co udało się wymienić samodzielnie ?

[@flaviusboruz7280]

Bravo ba Jerry

[@thepio14343SWEG]

Hey, nice vid bud.. I'm wondering if you still apply the loca liquid on the newer phones like the note s20

[@JerryMobilePL]

Soon will be the video 😁

[@MarioPetka]

It gets automatically update to Android Pie after replacing the screen? Your screen is magical! 😂😂

[@rattz_slos7439]

That's what I've been thinking about🤣

[@SaYO90]

Ikr 🤣

[@merafekalier9284]

I understand everything you say.

[@fatihadiyaman1711]

Nice video, nice work. I have to ask one question. After taking off the glass, do you need to remove the back cover and all the components if yes than why?

[@realista182]

same doubt, why to not KEEP all components? loca glue should not be electricity conductive..... so no problem if goes internals

[@marius4338]

@@realista182 if the adhesive gets dirty the camera and earspeaker. must be cleaned

[@huntingaliens5477]

@@realista182 no he dropped the phone he said and then needed to replace some stuff I believe. No need to take everything out

[@cpspec3004]

@@huntingaliens5477 He dropped the phone and broke the digitizer screen. Had to take that out too. correct.

[@parrot559]

Pozdrawiam również z Polski 😁

[@MistrzBartek125]

Tylko 22$ - dzięki, teraz mogę spać spokojnie

[@jay-rerrea9164]

is isopropanol is the same as isopropyl alcohol? im thinking on where to buy it 😅

[@marekbalog3816]

Hello can u tell me witch type of glue use?

[@Arbiter5490]

Hey what is the dispergator for? If you used isopropanol.

[@ziooooooom6]

w którym łatwiej Ci schodzi szybka w s8 czy s9?

[@bryanubautista644]

Justo lo que yo buscaba

[@brucemorgan9758]

Greta Job

[@raffkuttaz]

W tym wyświetlaczu nie ma nawet mikro grama ciekłego kryształu. Pozdrawiam i gratuluję cierpliwości.

[@1995Husni]

Bravo

[@tristanweiss7676]

Bonjours le produit que vous mettez avec la brosse à dents c'est quoi ? Sa ne risquent en rien sur lcd ?

[@knotty2348]

Good job

[@binhly813]

What are the grey card you using called?

[@fabiofdez]

I just have one question, how concentrated was the isopropanol? Was it diluted or 100% isopropanol? Great video, really helped.

[@shannonworlow4240]

You need 99% isopropyl alcohol

[@gersoncartagena3876]

Hey bro is that isoprpyp alcohol same like solvent or acrylic removable stuff or can it work??

[@Fishgod1216]

@@gersoncartagena3876 they work the same for this case. isopropyl alcohol 90% has similar properties to isopropanol

[@bayu-irsan]

@@Fishgod1216 how about acetone? i often saw some tutorials uses acetone

[@Fishgod1216]

@@bayu-irsan yes its the same virtually, though some say can damage a board if left on too long. just practice caution when cleaning, and you'll be good

[@rafal222379]

A jak się ma sprawa z Note 8?Masz może jakiś film

[@Kapalek84]

Super

[@ry2322]

Tried this on my s6 edge. I didnt have the propaline so it was super hard and took forever. The lcd screen is alot more resiliant than you would think. I messed it up a little and my touch screen doesnt work right haha but i still use the phone everyday and the screen looks awesome. Im ready to try this on my s8. With the help of propaline of course!

[@SFPD]

How'd it go?

[@ry2322]

it went really smooth. Screen detaches real easily.. I found out girls fake nail remover works the same n loosens that hard adhesive from between the glass.. it's the applying Loca that gets hard. Patients is the key

[@ry2322]

And a uv light lol

[@SFPD]

@@ry2322 good to hear, thanks for the info. And when you say nail remover, you got any specification?

[@thetechfromheaven]

Acetone is no bueno with PCB components, probably that thing is what ruined your digitizer. Try 99% alcohol or n-hexane next time

[@yassirrasheed2296]

Despite I didn't understand your language but I knew how to replace it

[@mojiyarjafari8809]

sir do a note 8 glass repacment

[@bassboostedromania105]

Make me a gel nails too

[@dragusanuu]

10. The best

[@theclipsrewind]

what type of glue do you use to join the screen

[@PanWaldemar]

Hejka. Mam pytanie. Czy niezbędne jest rozkręcenie telefonu i demontaż tylnej obudowy. W sytuacji gdzie jest uszkodzona tylko szybka czy nie wystarczające będzie usunięcie popękanego szkła oraz wklejenie nowej szyby? Pozdrawiam, jak byś mógł opisz co i jak

[@JerryMobilePL]

Hej 😁 oczywiście można, lecz szkopuł w tym że jeśli odrobina kleju wpłynie do przedniej kamerki i sensorów, nie dość że demontaż wnętrzności będzie konieczny, to wymiana tych części również ;)

[@PanWaldemar]

Rozumiem. Jak się mylę to mnie popraw. Czyli w większości nowych telefonów, do operacji wymiany szybki, niezbędne jest "wypatroszenie" ekranu, po to aby nie zalać elementów o których wyżej wspomniałeś?

[@JerryMobilePL]

Dokładnie, najbezpieczniej zdemontować wszystko co się da. Wtedy nie ma ryzyka uszkodzenia czegokolwiek 😊

[@Stanislawny]

Ja poczekałbym jednak z montażem tego ekranu i powycierał nadmiar kleju. Na końcu widać jak Loca podcieka do obiektywu frontowej kamerki. Za wiele dobrego z tego potem nie wyniknie.

[@yingfong4462]

It looks hard but it's possible at home. But I dont have the UV thing, the machine u have sadly. But I can get the rest. And rubber bands

[@shamshadalikhanofficial6305]

mic speaker camra rezolaion 🔥🔥

[@sanjayradadiya1846]

How to cost is proses? By full ditels.

[@reinikesretro]

What tool did you use to pry off the glass? That seems pretty important.

[@shuhaolu3257]

a screen seperator you can buy for about $40usd, instead of using a metal card you can use cutting wire

[@ridoy1383]

After repairing phone will be water resistant ?

[@squizi7090]

i broken my Galaxy s9 today my screen is messed up a little but the display is working perfectly for how mush it can be repaired btw thanks you very mush

[@Infernum_Records]

Do you have a video showing you using the diamond tip cutter?

[@JerryMobilePL]

Sorry, right now I haven't 😕

[@emcee-rit]

i was like what happened to jerryrigeverything. 😓😊 great work tho.

[@kasulebaker8044]

😂😂 he became jerry fix everything

[@jeremiahhodge8274]

This method look kinda of easy, gotta try it

[@miley6.915]

Remember one little scratch on the display and it will break.

[@steindanie]

Hello, my S8 has also a cracked screen and I have also a vacuüm heating machine like yours and similar tools to work with. I wanted to know if the heating machine was on at the beginning while you where working on the front of your phone?

[@JerryMobilePL]

Of course, it was enabled all the time on 80 degrees of Celcius :)

[@steindanie]

@@JerryMobilePL Thanks for your quick response! Was the machine on so the LOCA-glue would get soft? I thought when you put the machine on and the phone on it's backside that the glue of the backcover only would get soft?

[@JerryMobilePL]

@@steindanie If the phone stay on the separator, back will be heat in 5 minutes, display in 15 . So You can be sure it will help :)

[@steindanie]

@@JerryMobilePL Okay, that makes sense👍🏻 I am planning to give it a try tonight. With lots of patience and gentle hands I hope it will work. Thanks very much for the help! 🙏🏻

[@AndreiHanceariuc]

@@steindanie hello. Did you try it? How it was going?

[@freeskier250]

Hi, can you remove the glass with "hot plate and wire" method on s9 and other curved screens?

[@JerryMobilePL]

Of course yes, but it is REALLY difficult and hard to do 😏

[@freeskier250]

@@JerryMobilePL Thanks! I think it will still be easier than the method with the knife in your video though :)

[@SanJacinto23]

What temp does the freezer need to be at? Can I use the ordinary freezer in my kitchen?

[@gregoryyoung5219]

Can

[@kurtm5545]

do you HAVE to replace the LCD unit if only the glass is cracked? All my local repair shops say you do

[@vinbones]

no, they only say that because it's the safest option

[@Xellos357]

They say that because it's the easiest option and no risk

[@evgenyinkognito3700]

Powiedz mi, jak złamałeś ekran wokół krawędzi telefonu?

[@yeezywesty3651]

Patience. I see. I see. $300 tbey charge.. oh mai dayz

[@peterdayze]

Hard great solution in mi home

[@mobilyphone88]

You right s9 + 6 edge + 7 edge no easy

[@andresia1065]

Is it okay to use thinner?? And what glue did you use? I dont have a UV light

[@JerryMobilePL]

You can use special glue that don't need UV. Check in description 😁

[@zbigniewdabkowski2352]

Cześć jakie są koszty takie prawdziwe części na chwilę obecną I dlaczego serwisy kasuja tak duże pieniądze

[@lazuardiinggil]

Brutal

[@silverify]

is it necessary to take apart all to only replace front glass or is it because of glue?

[@mathewmallory1534]

Yea I didnt understand that either.. Watching the video it seems really pointless to take apart the whole phone just to replace the glass. Unless im missing somthing.

[@wyelandlebeouf7202]

The only thing I can think is to remove the possibilities of uv glue seeping over the camera lenses when pressing the screen down cuz then you would have a distorted front camera

[@danielpaterson9824]

I think he only took the back off as he dropped his original lcd so had to replace that ..think he would have kept the phone complete otherwise..I might be wrong tho.its just what I can gather from subtitles lol

[@tajulislam49]

Finally know how to fix my Samsung s8. Saw many videos but all of them are crap

[@paryk144]

Cześć, ciągle nurtuje mnie jedno pytanie: czy od używania np. karty bankomatowej nie uszkodzisz wyświetlacza? Chodzi mi konkretnie o fakt, że praktycznie przez cały ten czas zabiegu, ta karta "jeździ" po wyświetlaczu. Chciałbym się u siebie zabrać za wymianę szkła, ale właśnie obawiam się, że wyświetlacz ucierpi.. Nie wiem na ile można sobie pozwolić, używając siły.

[@JerryMobilePL]

Hej, karta płatnicza jest zdecydowanie zbyt gruba :D Potrzebujesz czegoś metalowego, a grubości maks 0,1mm. Znajdziesz u mnie w linkach gdzieś powinno być 😁

[@paryk144]

@@JerryMobilePL ta karta to taki przykład był :D Zdążyłem zauważyć, że twoje narzędzie jest dużo cieńsze. Mnie tylko ciągle martwi kwestia, czy podczas odklejania szkła, poprzez ciągłe tarcie tym narzędziem o wyświetlacz, czy to nie jest zbyt agresywne dla wyświetlacza? Pytam bo cena samego szkła jest śmiesznie niska względem ceny wyświetlacza :)

[@HowyeDan]

If using hairdryer how often do u heat

[@nexamie]

Like 50 times.. I already did... But it works

[@ChrisZzippy]

Wow 5 Star

[@Sulliander]

Jakiego spreju użyłeś do wymiany baterii ?

[@JerryMobilePL]

PCC15 😁

[@EvilJavert]

what's the concentration of the isopropanol? can you use regular 70% isopropanol (rubbing alcohol)?

[@davidvasquez3564]

91%

[@Vladimir-ds3lh]

What’s the name of the liquid you’re using?

[@hghmnds]

20:06

[@Infernum_Records]

How did you crack the sides of the screen without damaging the pixels? Can you use acetate brake cleaner instead of the isopropanol?

[@JerryMobilePL]

I used glass diamond knife to break the edges :) Yes, of course You can use 😉

[@pedrosouzaconserto2001]

Ops blz sou do Brasil sou iniciante

[@Nino3580]

Assuming you replace the glass, it would still be water resistant? Pls. I'll be so grateful to know that. 🙏🏼❤

[@JerryMobilePL]

If You put enough of glue of course it will be 😀

[@Nino3580]

@@JerryMobilePL The way you put the glue was perfect, it don't affect the camera or the talking of the phone. Thank you for your response!

[@markpoge6451]

What are called to that glue?

[@0michas066]

Jaki koszt takiej wymiany? Chętnie oddał bym mój s9+ w twoje ręce

[@SonyJony1]

👍👍👍👍👍👍

[@szymon7xx7]

Kolego, czy szkło s9 jest klejone tym samym klejem co szkło w s8 ? Ja miałem 4 próby i każda coraz lepiej ale jednak każda zakończyła się niepowodzeniem, 2 razy ekran mi się rozwarstwil A w kolejnych dwóch próbach w którymś miejscu wylał, później doczytałem na zagranicznym forum że s8 ma inny klej niż w typowych smartfonach, bardziej odporny na temperaturę, stąd problem z separacją szkła.

[@JerryMobilePL]

Klej jest taki sam, jednak do temperatury polacaĺbym dodać izopropanol. Delikatnie trzeba go aplikować pod szkło, wtedy klej rozouszcze się o wiele lepiej

[@szymon7xx7]

@@JerryMobilePL Dziękuję za radę, przy następnej próbie zastosuje ten sposób. Mam jeszcze typowy rozpuszczalniki do kleju loca, czy można go zastosować zamiast izopropanolu? Da lepszy efekt?

[@JerryMobilePL]

Jak bajbardziej 😁

[@szymon7xx7]

@@JerryMobilePL dzięki!

[@shahabmahboubi4935]

Hello can you tell me how to use with glasss knife or ony diamonds?

[@JerryMobilePL]

Just cut the edges. I am planning to show it on my videos soon, but I'm still working on it..

[@shahabmahboubi4935]

@@JerryMobilePL can you show me how to broken side of lcd

[@user-of5yb4wr1p]

Самая лучшая переклейка

[@airidasrom583]

why did you take out the motherboard in the back ? or just why you took the whole back off ?

[@zamanraja9531]

What can you use as alternative uv light if I don’t have a uv light machine ?

[@mymitik]

The sun

[@KM-se4is]

Cześć. Mam pytanko. Czy do przyklejnia szybki do wyświetlacza można użyć t7000 przezroczysty czy musi być ten loca?

[@JerryMobilePL]

Heja. Ta opcja kategorycznie odpada- T oraz B 7000 ro kleje o bardzo wysokiej lepkości, przeznaczone do łączenia szyb i wyświetlaczy z korpusem telefonu. Jeśli użyjesz go pomiędzy szybą a ekranem, nie będziesz w stanie wycisnąć bąbli a później odkleić szyby od ekranu. Tylko LOCA, T-7000 po bokach do ramki 😊

[@KM-se4is]

Dzięki. Za odpowiedź. Już zamówiłem loca. Ogólnie bardzo dobry poradnik mam nadzieję że w miarę wyjdzie na mojej s8. Pozdrawiam

[@KM-se4is]

Hejo . Mam problem bo jak szybę sciągonłem to została srebrna folia. Będzie to działać?

[@kacpermarciniak259]

@@KM-se4is i jak ci poszło? działa wszystko?

[@KM-se4is]

Niestety nie

[@jankomar2685]

Jak szkło wpasowuje sie ,czy zamiennik jest takiej samej jakosci jak original?

[@JerryMobilePL]

Ten mój wszedł idealnie i do dziś się trzyma super 😁

[@ambercasper6398]

If I already tried to remove my glass with just a heat gun and my screen then went black, does it all need to be replaced or is it possible i lifted the glass assembly too much and disconnected it from the motherboard? Trying to see if I should just wait or try again.

[@shannonworlow4240]

Did you replace the whole thing?

[@ambercasper6398]

@@shannonworlow4240 no i havent touched it since

[@teknodetox5060]

Has the sense of touch changed

[@garymaya1767]

Isn't acetone a better solvent for super glue.

[@fabrizioficarra3946]

I removed the back cover for the glue application part. Some glue went on the glass where the front camera is. Now it's very blurry. I tried with alcohol but doesn't help, also it's a very tiny space to work. Is there a trick to clean out the glue?

[@DIMRACK]

I heard you have to clean it from the back side, like open up from the back they talk about it in a video made by ECrepair I think it is

[@DIMRACK]

ECdiy although his method to remove the screen is a bit barbaric

[@quickfixgsm8896]

Sir pls make iPhone X glass change video.

[@JerryMobilePL]

Maybe soon 😎

[@aleyalan2010]

Can b done without putting apart the phone?

[@101idi]

?

[@theloltechnology4133]

what temperature did you put in the heater?

[@JerryMobilePL]

I used 80 degrees of Celcius

[@trevinhudson4815]

Good day I'm interested in a back and front glass for a Samsung s9+ can you share a link to that please in yoy have one thanks and great reviews

[@wyelandlebeouf7202]

I got you bro I just bought a kit that had it all for my s8+ front and back glass with the tools as well for cheap

[@wyelandlebeouf7202]

I normally get em off amazon and they ship in 2 days but your phone they didn't have a front back glass combo it'll take about 8 days from Ebay to ship

[@wyelandlebeouf7202]

The only downside to these kits is they come with a uv glue to glue the lcd to screen so they make an assumption everyone has a uv light? But there cheap 10 at Walmart I personally use a uv nail dryer 20 bucks on amazon

[@iamrusofficial]

Ждем!

[@user-jy9bw4on1f]

Цукнн

[@shithappens3031]

zanim zrobisz film naucz sie budowy wyswietlaczy , gdzie w elastycznym ekranie oled masz ciekly kryształ ?

[@JerryMobilePL]

W każdym

[@shithappens3031]

@@JerryMobilePL xD elastyczny oled to diody elektroiluminescencyjne mają postać "stałą"i odpowiadaja za obraz i kolory , zwykly lcd czy TFT posiadają pomiedzy warstwami ciekly kryształ co mowi nam ze jest to ciecz i ona pod wpluwem pola elektrycznego wysylanego przez elektrody pod kazdym z pikseli odpowiadaja za zalamanie światla tzn przepiluszczanie go przez piksele ktore sa zabarwionymi na 3 kolory komórkami

[@JerryMobilePL]

Wiem o tym. Szkoda że nigdy nie widziałeś efektu jak się taki ekran rozlewa

[@shithappens3031]

nie rozlewa sie a delaminuje , rozlac może się lcd , oledy delaminują sie

[@szymonturko9169]

to wyświetlacz typu amoled nie używa on ciekłego kryształu jak lcd

[@Bilal-iv9fc]

ما هو مدة الذي تستخدمه من فضلك قل لي

[@lankydic5996]

what temperature was the hotplate at

[@billygraves1769]

No more 90 degrees cel

[@arturchristoph3178]

Hello, can LOCA liquid adhesive be used for screens with a finger reader? Will it work without a problem?

[@JerryMobilePL]

Of course, I tested it. But You have to push the glass very strong

[@arturchristoph3178]

@@JerryMobilePL Thank you very much for the quick reply. I will try to fix Mi note 10. 👍

[@JerryMobilePL]

@@arturchristoph3178 Wow, nice 😁

[@flamingrage100]

@@arturchristoph3178 hey did you fix your note 10 my friend broke his and I’m wondering if it worked for you

[@arturchristoph3178]

@@flamingrage100 I bought a complete screen, it was hard to unstick the touch from amoled. The screen from Ali works perfectly fine.

[@bbessi3454]

I can fix my front glass without removing the back front please tell me ?? Thank you

[@teenieweenie4549]

Same here. Why remove back if it's only front glass?

[@chemedev]

@@teenieweenie4549 I believe he did it because he also changed the display itself.

[@teenieweenie4549]

Right, I assumed that but EVERY video I've seen does the same thing. It drives me crazy like it's so easy yet nothing on just the screen.

[@triplepong6982]

To not stick the front facing camera cuz it can damage it

[@skynamxiv21]

Maybe to prevent the liquid from entering the machine inside? Wondering the same thing

[@CTAPbIU_APECTAHT]

Камеру чуть залил, а так норм =-)

[@Fagylalt78]

Dude. 20:05 Your tongue! XD

[@JerryMobilePL]

Joke 😁

[@Mxrris]

Haahahaha thats funny