How to Install a Shunt Trip on an ABB TMAX Series T1, T2, & T3 Enclosed Circuit Breaker

[@GalcoIndustrial]

Thank you for the comment. We're glad that you were able to find this useful.

[@chandeshwarsingh7665]

GalcoTV assemble on starting

[@GalcoIndustrial]

The shunt trip featured in the video is 24-30 Volts AC/DC, but there are a wide selection of voltages up to 500 Volts AC for shunt trips on the T1-T3 circuit breakers. There are also wire leads that can be seen on the video to make a connection to the application you desire.

[@GalcoIndustrial]

Good to hear from you. We hope your installation is successful!

[@patosilart]

How many volts applied to the shunt trip in itself,how can be connected to the relay or fire alarm panel. Thanks.

[@gwallisonjr]

Well done! Easily followed.

[@raed088]

that is the best Circuit breaker ABB

[@firemech4230]

Galco team, Good video..Thanks.I have a T4S breaker. The breaker grts tripped but unable to reset.(i.e) after the breaker goes to a trip mode, if i pull down the breaker to OFF position it goes back to trip position.Any suggestions?

[@serhiy676]

Replace the breaker 😂

[@05915291]

Thank you, very helpful!

[@patosilart]

Thank you

[@senguttuvank599]

Thanks

[@MultiCupid1]

Excellent!!

[@beckenbauer1974]

Thank you so much

[@badrijat9716]

❤️❤️

[@santhupadukone2234]

CAN WE INSTALL IN ABB SACE SERIES (S7) ?

[@GalcoIndustrial]

The part you would be looking for begins with K7S and a number after that which indicates the voltage rating. The Tmax part numbers begin with KT and is not interchangeable. With the Isomax Series (Sace Series) being obsolete, it may be a bit difficult trying to track them down and you may need to contact ABB directly for further support.

[@santhupadukone2234]

GalcoTV www.moosetrading.com/products.php?view=7263&sort=&search=ABB&offset=0 WHAT ABOUT SHUNT TRIP K7S8.24VAC/24VDC S6/S7 D#121002 M340770 IF YOU GOT ANY ABB CONTACT DETAILS PLEASE LET ME KNOW,,,

[@balaamace]

Thank u very much

[@santhupadukone2234]

WHAT ABOUT SHUNT TRIP K7S8.24VAC/24VDC S6/S7 D#121002 M340770 IF YOU GOT ANY ABB CONTACT DETAILS PLEASE LET ME KNOW,,,,

[@GalcoIndustrial]

Try Galco's website and search for the part number K7S8. You can message me if you want the link, but I can't post it here on the channel.

[@santhupadukone2234]

okay sure,,,,,,,,,,,,,,,

[@up2sun]

GalcoTV Dear Galco can i use undervoltage release as shunt open release in XT6 and in Emax 2.2?

[@firosee.k8164]

Super 👌🏻👌🏻

[@medidasriram9751]

thank you so much