Galley cabinet removal on a Catalina 30

The Sailing project Atremis EP.8 - Galley Cabinet removal
#catalina30 #sailing #howto #sailboat #catalinaboats #boating
This project should not take you no more than 30 min and I would recomend doing this every few yeard to inspect hoses and systems
Dont forget to leave me a comment and subscribe!
Let me know if I can help you in anyway
Me on Social media
Insta @pussfoot44
FB The Sailing Project Artemis
Artemis merch
sailing-projec...

[@FarahSmith-h8z]

This is the best video I have seen for the Catalina 30 thank you and keep them coming

[@Sailing.Artemis]

Thanks, will do!

[@jonfroyd8658]

This was exactly what I need for my 85 Catalina 30!!! Let the cleaning begin

[@Sailing.Artemis]

Glad it helped If you have any questions let me know

[@stinkgoat]

Dude, as a Catalina 30 owner, I really enjoy your videos. Keep it up.

[@Sailing.Artemis]

Thank you my man

[@DonaldABrown-kn7px]

Most helpful that i have seen so far!!

[@Sailing.Artemis]

Thank you hope it helped

[@simpdog78]

Just got a '78 Catalina 30. Lots of projects ahead! Thank you for making this video! You got a new subscriber!

[@Sailing.Artemis]

Happy to have you If you have any questions or need advice please feel free to reach out

[@Wanderlust-jg5vv]

Amazing to see this on KZbin been looking for this exact video

[@Sailing.Artemis]

Glad I could help

[@og-life263]

best catalina how to video ever

[@Sailing.Artemis]

thank you very much i searched for one of these couldnt find it so i made my own

[@jamesmcreynolds7307]

Thank you for this video, I removed my sink and counter today on my 1978 Catalina 30, identical set up. You saved me at least an hour hunting for screws! Keep up the great work!

[@Sailing.Artemis]

Sweet I'm glad this helped at least a few people What are you working on are you removing the motor ?

[@jamesmcreynolds7307]

@@Sailing.Artemis No, I bought the boat about 8 months ago, good bones, but lots of projects. The engine is actually in much better shape than yours, so only maintenance for now. I have been recovering from a previous owners very bad idea to stain teak and all the wood. A friend of the previous owner came in and stained all the teak (not varnished). Worst still, it was a dark stain and the individual just "painted" the stain while everything was still in place. The stain ran down and puddled on the fiberglass. When I removed the old clocks from the wall I found they didn't even bother to remove the clocks when they stained the walls. I have had to remove everything, sand it and varnish the thin teak. With your guidance, I removed the counter and could clearly see three different layers, where the stain got, where the factor treated the wood, and where the factor DID NOT treat to plywood. This was the case in the unseen areas behind the stove and under the counter. I had a leak so I dried out the wood sanded it down and varnished everything to provide some moister protection.

[@Sailing.Artemis]

@@jamesmcreynolds7307 wow big project We took the motor apart last week Vids up Funny thing is it was mint inside 😹 And the oil drip was from oil change system Still glad I pulled it new paint and no rust will be a good thing

[@jamesmcreynolds7307]

I also recovered the vinyl fake wood countertops with thick vinyl fake white marble. Looks better and lights up a already too dark interior

[@Sailing.Artemis]

@@jamesmcreynolds7307 sounds amazing I'd like to see that

[@BegToDiffah]

Just found your video and I'm so appreciative! I've got an 86 Cat 30 SR and often feel lost on how to do things, so I'm looking forward to your vids!

[@Sailing.Artemis]

My pleasure thank you for subscribing

[@SailingRiverSong]

Evening dear subscriber 😋 You realy inspired me to go on with the galley on RS. Video is Comming Have a good weekend.

[@Sailing.Artemis]

Can't wait to see it love watching your videos

[@SailingRiverSong]

@@Sailing.Artemis Same here. 😋 Found anything useful on that catalina that fell?

[@Sailing.Artemis]

@@SailingRiverSong a few items but the yard crew crushed it and sold the keel before I could get back to it

[@guitarstroke]

I have my own exhaust hose repair coming up. I bought the slang40 hose in hopes it would be easier to manuever. It's supposed to be more flexible. Good luck on the replacement!

[@Sailing.Artemis]

I looked at the path and I don't think it will be to hard I'm going to run a chaser and add pull grease that I would use to pull feeders through conduit at work

[@kameltoes2625]

How did the Vetus Slang 40 hose installation go? It is supposed to be easier to maneuver through the tight spaces than the Shields 200 wet exhaust hose. I have a Cat 30 and my exhaust hose is badly cracked. If you are a cat 30 owner, how many FEET of hose did you need to buy?

[@guitarstroke]

@@kameltoes2625 I bought 23 ft to be safe, if memory serves

[@duncanpotter5838]

Thanks. Looking at a C30 now. Appreciate learning about the ins and outs

[@Sailing.Artemis]

My pleasure let me know if you have a y questions

[@buenaventuralife]

Thank you . This is the first video I found on how to pull the counter out. Winter project is to rebuild my engine (I hope it is rebuildable).

[@Sailing.Artemis]

If you have any questions please let me know and I'll try to answer

[@Sailing.Artemis]

Is it the m-25xp?

[@buenaventuralife]

@@Sailing.Artemis It is the M25, Kubota D850. I need to do a tear down because it is seized hard. I suspect a bent rod as I found a cylinder full of oil when I pulled the glow plugs. I hope that if it is a bent rod the block is not damaged. If necessary I will drive over to an engine seller and pick up a rebuild and replace the plugs with brass plugs. At least these are still available, either the D850 or the D950.

[@Sailing.Artemis]

@@buenaventuralife you can re sleeve it no problem

[@Sailing.Artemis]

Yes it is we are unbolting it today

[@dreamwavemarine9346]

Thank dude. About to do this for a customer next week 🙋🏻‍♂️

[@Sailing.Artemis]

Feel free to hit me up on insta or FB if you have any questions

[@garymarquez5246]

Hello Mate, So glad to see your video. I am refitting my 1978 O'Day 30" . I can use all the help I can get. I'm learning so much from you. I can find any designs for 30' ers on line.

[@Sailing.Artemis]

Thank you for watching let me know if you need anything from me

[@danaford7425]

Thanks for the video. Great demonstration.

[@Sailing.Artemis]

My pleasure glad it was useful for you

[@boatingallaround5933]

Candies for saturday eve....LOL :-) Looking forward to a review on the taste..... Good job :-)

[@Sailing.Artemis]

Lol lol is that what that was candy 🍬🍬?

[@boatingallaround5933]

@@Sailing.Artemis looked like candies…. But haven’t got a clue 😅

[@Sailing.Artemis]

@@boatingallaround5933 lol I left it under the boat cause I didn't have a trash bag when it gets colder I'll cut it open

[@cascadesouthernmodeltrains7547]

I just started this project tonight. I didn’t get the countertop out as I was searching for screws and didn’t find them all. Gotta look in the pantry for those last 2. My engine is the M5411 so I only have a puny 2 cylinder.

[@Sailing.Artemis]

Hope this helped you figure it all out If you have questions feel free to reach out And good luck you got this

[@ourglasssports6403]

Oh boy..... Can't wait to see the motor removal and the electric system re boot

[@Sailing.Artemis]

lol yes that makes two of us lol

[@garrylycos4795]

It took forever with a stubby screwdriver to get those inside cabinet screws out. Mine wasn't fun. And that back footpump hose was rough.

[@Sailing.Artemis]

Glad you got it done

[@finnsailing69]

Hey man! It´s your latest subscriber here from land of sauna and perkele :D

[@Sailing.Artemis]

Just subscribed back can't wait to watch your videos

[@finnsailing69]

@@Sailing.Artemis awesome, it´s too bad that weather here is soooooo cold, something like -7c so boat projects have to wait

[@Sailing.Artemis]

@@finnsailing69 well the spring it is 🔥🔥🔥

[@jeffcee9457]

Thanks for sharing I'm about to buy a 30 ft cat a d there is no video on how to remove this cabinet

[@Sailing.Artemis]

My pleasure

[@rcolvill]

Excellent.. Thx

[@Sailing.Artemis]

Any time

[@secondstar430]

every Catalina owner needs to watch this #catalina30

[@Sailing.Artemis]

#truth

[@63bucki]

Going to be tackling this project to gain access to my water muffler!

[@Sailing.Artemis]

It's really not that hard Feel free to dm me on insta or FB if you get stuck More than happy to help

[@therangeguy]

Thank you for this

[@Sailing.Artemis]

Any time

[@sipitak8702]

thanks for this video

[@Sailing.Artemis]

my pleasure if you have any questions please let me know

[@nufsed]

Did you replace the exhaust hose? How many feet did you use if you did? I assume it snakes around all the way to the transom or is it piped? New to the C30 mk1, and when I ran the engine last time, the cabin seemed like it had some exhaust fumes in it. the boat is an 86, looks like original hoses on it.

[@Sailing.Artemis]

@@nufsed yes and I ordered 20 feet but did not use nearly all of it I will say it was a horrible job getting it through If I had to do it again I would make cuts for sure

[@nufsed]

@@Sailing.Artemis Thanks for your reply.

[@Sailing.Artemis]

@nufsed any time are you local to me ?

[@nufsed]

@@Sailing.Artemis I am in the mid west, sailing on a land locked lake.

[@Sailing.Artemis]

@nufsed wish I could help

[@kameltoes2625]

It is funny. MY Catalina 30 had the flapper valve of the raw water anti-siphon loop removed, and connected via a hose to....(drum roll please...) the galley FAUCET !!

[@Sailing.Artemis]

You know I was thinking about plumbing it into there but I'm going to try the flapper first

[@albertmorgan9021]

Bit of a goober lol but really cool thanks brother good luck God bless definitely 👍 up and a like

[@Sailing.Artemis]

Thanks man

[@ryancasserly319]

😁

[@Sailing.Artemis]

❤️

[@briancasserly]

⛵

[@flyinryan3148]

When's the next video

[@Sailing.Artemis]

Out tomorrow sanding and flamethrowers lol 😂

[@flyinryan3148]

Try for sharing

[@Sailing.Artemis]

any time

[@Wanderlust-jg5vv]

🌬️⛵