Gaming PC Build - White | AZZA 808W-M | 5700X | Noctua NH-U12A | X570S AERO G | RTX 3070 Vision

Gaming PC Build - White | AZZA 808W-M | Ryzen 5700X | CableMod
Noctua NH-U12A | Noctua NA-HC8 | Corsair RM850X | T-Force XTREEM White 3600 32GB
Gigabyte X570S AERO G | RTX 3070 Vision
► Note:
Total cost of building this PC without the GPU is $1545
Gigabyte GeForce RTX 3070 Vision MSRP is $570
► If anyone has questions, please subscribe to my channel and write your questions on my video. Thanks.
► Thanks to AZZA for sending me a review samples. For more information visit: azza.gg/
AZZA 808W-M azza.gg/azza/p...
► Thanks to Acer Predator for sending me a review sample. For more information visit: www.predatorst...
Acer Predator GM700 www.predatorst...
► Thanks to CableMod for sending me a review samples. For more information visit: cablemod.com/
CableMod Cable Kit for Corsair RMi /RMx /RM cablemod.com/p...
► Parts list: (Amazon affiliate)
AZZA 808W-M White Case amzn.to/3exXwJm
AZZA Hurricane III Digital RGB Fan 120mm amzn.to/3xr146P
Acer Predator GM7000 1TB NVMe amzn.to/3cQgH0r
Acer Predator GM7000 2TB NVMe amzn.to/3D8JxE5
CableMod Cable Kit for Corsair RMi /RMx /RM amzn.to/3cYgFn3
AMD Ryzen 7 5700X amzn.to/3x0pvra
Noctua NH-U12A amzn.to/3eu8nnu
Noctua NA-HC8 amzn.to/3QiY5Ul
Corsair RM850X amzn.to/3D3Pj9Z
T-Force XTREEM White 3600 32GB amzn.to/3x4wPSW
Gigabyte X570S AERO G amzn.to/3qfqjon
Gigabyte RTX 3070 Vision amzn.to/3cVUNsr
LINKUP - Ultra PCIe 4.0 X16 Riser Cable amzn.to/3d6gO86
► Tool:
Xiaomi USB Cordless Electric Screwdriver amzn.to/3w5OauN
► Wall:
Art3d Textures 3D Wall Panels White amzn.to/36fhkNh
► Camera:
Samsung Galaxy S21 Ultra
► Music:
----------------------------------------------------------------
Balloons (Instrumental Version) - I'MIN. EpidemicSound
Morning Stretch - Timothy Infinite. EpidemicSound
ES_Butterfly Effect - Dylan Sitts. EpidemicSound
RESPECOGNIZE by Diamond Ortiz
----------------------------------------------------------------
화이트 컴퓨터 조립
#AZZA #AcerPredator #CableMod

[@SergeantQuackersThe2nd]

Very nice PC Build. Currently moving onto a White + Black Razer PC Setup as moving on from the RGB Color. But the Build has definitely given me more inspiration haha. Always looking forward to watching more of these Videos.

[@djbbybnz4444]

I rarely comment on pc builds like these. But gorgeous is an understatement. I can't put into words how beautiful this build is.

[@gx_olix2430]

OMG this is so exciting, realy nice build :)

[@Constantin314]

very cool videos and very well edited. imo, just for the show, try wearing white gloves when assembling the pc, it'll give a luxury aura imo :)

[@vizzy311]

Squeeky Clean

[@omarladjal2867]

nice and clean as always

[@propcusto]

8:27 is a perfect view for me

[@Overnightzvdf]

I lovev that coler so modern look

[@heavymetalcleaner2597]

Do you mount GPU's vertically by default? I think it looks so much better, you get to see much more of the cooling design and none of the dreaded sag! You'd think it'll become a standard feature of all cases and the connection included with the GPU as they become increasingly larger and heavier.

[@PCTechnician]

It's not default. You have option to do so.

[@mirkobrugnoli9106]

30cm or 20cm?

[@RobertBIrish]

You need to create playlists so that I can put them on loop

[@joshfetil6059]

Hey man is it possible to request a all black build , i like all your pc build thx planning to build mine thx cpu :ryzen 5700x series mobo : b550-f strix wifi cpu cooler : deepcool as500plus ram : 2x8gb crucial ballistix RGB gpu: 3060 ti maxsun or 3070 ti psu : 750w psu fully modular case : fractal pop air

[@RobertBIrish]

Noctua by far has the best mounting hardware there is

[@yuumetal2363]

my pc case fan is ON while sleep mode, I dont find setting to change to S3 in Bios. how do you turn off case fan during sleep mode? someone tell me if you know.

[@hardwarefan5432]

Hello dear, what lights do you use for recording videos (softbox ? how many ? link if possible) ? Your Camera is a S21 Ultra now ? Do you use a tripod or stabiliser for your smartphone ? Thank you so much !

[@PCTechnician]

I use something like this amzn.to/3ee1w1M . Video is captured with Samsung S21 ultra with tripod.

[@hardwarefan5432]

@@PCTechnician thank you so much !

[@TexugoFTW]

im early af!

[@thenicoleodeon]

When did you get the rm850X psu?????

[@hardwarefan5432]

DO you have video sliders for your s21 ultra ? How do you do your slides on camera ? (left to right around a product)

[@sk1ntbunny]

Hey newly subscribed, can you recommend me the best build for 1080 gaming pc? I mean the best there is to build it, from m.2s, power supply, gpu etc. thanks!

[@PCTechnician]

Sorry this is a broad question. There are so many to choose from. If you decide and list parts here, I may give you a recommendation.

[@sk1ntbunny]

@@PCTechnician Uhmm.. Maybe a RTX 3060 ti or an RX 6600 for GPU, someone said to me they are the best for 1080p but i don't know what's the best components that fits those said graphics cards.

[@PCTechnician]

RX 6600 for the budget build. I'll go with RTX 3060ti. The Ryzen 5600X + RTX 3060 ti combo was the most popular build.

[@sk1ntbunny]

@@PCTechnician oh ok thanks 😁

[@morrisjanjavier394]

I have old 700 watts psu. Would that eb enough for ryzen 7 5700x and rtx 3070?

[@PCTechnician]

Yes

[@dookiegoblin]

can i use a 4k 240hz monitor for this build ?

[@PCTechnician]

Yes

[@edfarage570]

wasn't that too much thermal paste?

[@PCTechnician]

You only going to have problem with tiny paste. Check out the gamersnexus article. bit.ly/3kNyPrf

[@Keaaaa757]

im getting the pc with 5700x rtx 3070 are those specs good enough to play gta rp and fortnite and valorant and apex pls let me know

[@PCTechnician]

Yes RTX 3070 is good enough

[@Keaaaa757]

@@PCTechnician what about the 5700x

[@PCTechnician]

Good

[@CannibalKats]

there is too much thermal paste. It can cause bad temperatures on the CPU. Noctua itself states that it is enough if there is a pea in 5 mm in the center of the CPU. The paste just fills the gap

[@PCTechnician]

That is not true. You only going to have problem with tiny paste. Check out the gamersnexus article. bit.ly/3kNyPrf

[@CannibalKats]

@@PCTechnician The basis is the smallest possible deviation between the CPU and the cooler. Then a paste of 0.1 mm is sufficient. When the cooler is applied, it is always tightened crosswise. In approximately the same way, it is important to control the temperature of all cores. if they are approximately the same, the paste has been applied correctly. A lot of people make a big deal out of it. This method is from Noctua technology. From the article, the difference is 2 degrees. 1-2c is negligible. The cores are not under the entire cover. Many pastes have a worse temperature and everything around is spinave. In the end, it doesn't matter how it is applied there.

[@PCTechnician]

@@CannibalKats Well, you said it cause bad temperatures. I disagree. If you look at the link I showed you(actually there are many more result I can show you) think it's incorrect I have no word to say.

[@CannibalKats]

@@PCTechnician in the article it shows how the pea paste is not in the corner. In the graph, the difference is one degree. If you think it was bad, the heaters would be much worse, but they are not.

[@CannibalKats]

see how your paste flows when you tighten it. Time 2:11 for me it's unprofessional. but I have to say that the videos are nice

[@caball8379]

In der Front hät mich 140er Genommen

[@HuH-R4]

is 2022 and not 2023

[@PCTechnician]

Fixed it thanks

[@drtydawg73]

awful case.

[@hollisnelson5925]

Another very nice build. Your builds are always solid, clean, and visually appealing. Do you pick the parts for your customers or do you just assemble the parts they purchase themselves?

[@PCTechnician]

Thank you. Some of the parts are sent from a PC company & I pick the parts for KZbin videos. Then it will be sold to customers.

[@xotee6451]

Hooray, a new video! Thank you for making these, they're very entertaining!

[@absurdgaming00]

Loved it when it's not vomiting rainbows.... Beautiful!!!!

[@bricktronics]

I love the black and white balance going on here.

[@karl3287]

Finally, a new video! I just love watching PC building videos, especially if not RGB 😉

[@xdeftonesx]

Once again Awesome stuff man

[@askulkingfox]

I love this build - nice work!

[@imamsyafei8703]

Long time no see. AZZA

[@rashadagamaliyev6129]

Hi friend.intel core i5 12600k or amd ryzen 7 5700x or 5700g best for render and gaming?

[@PCTechnician]

12600K is better compared to the Ryzen 5700.

[@user-hk7iy2vt5y]

Presentation 🔥

[@xxannirgenvrai]

gg

[@빈승-p3h]

yes

[@mr.cooper594]

He put the psu upside down and no heat spreader on the ssd

[@PCTechnician]

The correct way is to mount the PSU facing down but you have to place the fan face up with this case. NVME comes with a graphen pad which drops -18C more.

[@xpartyo_3077]

Was the power supply put upside down?

[@PCTechnician]

Yes. You have to mount upside down with this case.

[@Zynonsis]

Update clip everyday please . I like your build so much . I love this channel

[@MH-is7eu]

Thank you for being a channel with no “Random Gamer Bullshit” pc build. Keep them coming.

[@JustJai23]

Here before 500 views

[@lampdostuff2746]

Why such a high watt psu im new so just curious i would think 700 - 750 would be good

[@PCTechnician]

Even 650W works here. More power the better because A PSU that runs at 85% efficiency will use less electricity (and dissipate less heat) than one that runs at 75% efficiency.

[@lampdostuff2746]

@@PCTechnician I see thanks for answering

[@kdogtheprotogen2716]

Me when "he" uploads: YEEEEEAAAAAAH

[@gamerschuck4391]

sickk

[@akhenoo2235]

Speechless to this build

[@vaguer3913]

I love these videos

[@BigT90]

Love it, that is all

[@streamline247]

Fantastic 🧐

[@user89623]

cleannnnn

[@XYLOIII]

You building pcs weekly and even tho u don’t keep them its amazing that you can do this because I’m just a teenager but all i have right now is a nzxt h510 case and I’m building up to what i hope i will be able to build but watching your videos just is soo mesmerising 😂 Great work tho

[@XYLOIII]

Thanks!!! I will eventually accomplish my dream

[@jamessheard7067]

Very interesting case design, too difficult for me, would be a pain to clean.

[@zortrexxx]

Did you have to update the bios so the 5700x could work with the mobo or was it ready right out of the box?

[@PCTechnician]

Motherboard works out the box