Gan Pyraminx M Mod/Setup Tutorial!

[@JackRooney]

to anybody wondering the washer size: there is a pack called "moyu washer set" on the cubicle for under a dollar, and it fits perfectly underneath the nuts.

[@StevenWintringham]

Hopefully this will give my mods more exposure

[@CubeMasterYT]

Hopefully! Thanks for coming up with the mod, seems to work well with me and a lot of other people :)

[@StevenWintringham]

@@CubeMasterYT I'm also glad Drew was able to improve on my original tip mod. I'm glad you discovered that you don't have to use anything to hit the thumbtack. I found that out after I posted my updated video but I didn't feel like it was worth redoing.

[@RamThakkar]

@@StevenWintringham bro...

[@sarikasawhney2278]

@@RamThakkar I recommend u some n perms in your video. Please see the alg. It’s in the replies to Yatharth Jain.

[@RamThakkar]

@@sarikasawhney2278 thanks!

[@KardTrickKid]

Nice! I love the wintringham mod, very pog

[@KardTrickKid]

Also, you don't need to fully disassemble the hardware for the mod. For example, my wrm/wrm 2020 came with an accessories box with washers, which I used to do the mod

[@ClockBestEvent]

my wrm washers didnt fit

[@grevier22]

Really liked the difference the magnets made on the tips. Did not like the changes made by adding the washers. It did stabilize it but it made it a bit slower and it was hard for me to adjust so I took em back out. I also found it didnt corner cut as well with the washers in.

[@izumi2165]

holy molly these are sooo good. I was struggling with this perm and I just found this. thanks for sharing!

[@cubingnetwork2872]

OK I love this channel!

[@cuberatwork4923]

1:48 it is better to use the xman bell v2 screwdriver with the flathead srew to pry of the caps becuase the caps won't go flying

[@CubeMasterYT]

Thanks for the info!

[@maksymilianzeszutek8377]

Man i love you. You change my live thank you very much that was very usefull

[@nathanlamchamkee6818]

M6 washers will work fine. The size is 6.4mm (about 1/4") for the inside diameter and 12mm (about 15/32") for the outside diameter.

[@weeklycuber3391]

why am i watching this i dont even have a GAN pyra

[@beastboyjoy3884]

Me too

[@decubed1556]

Great Tutorial thanks!!!

[@RamThakkar]

Steven epic

[@benjawansansathean6754]

i like to use mystic with dnm 37 and weight 2 to lube the core

[@davidcejka253]

if the cube, after the solve, is out of the mat is it plus 2?

[@cubingempower2857]

Nice, a new subscriber!

[@531_.3]

Hi can I ask is a ruler gonna help remove the tip?

[@td6935]

i have a question: with your ylm sq1 mod do i have to put in the edge magnets or is it ok without

[@NinjaCubed]

Does the cube loose some of its performance when you take out the washers?

[@plantutamecanicu6233]

Will this mods work on the gan pyraminx explorer?

[@johnmurray9462]

Love the video

[@_simmmion9581]

do u have the exact washer size

[@stickang5831]

i am abit confused, am i supposed to punch a hole through the plastic to get rid of the magnet?

[@CubeMasterYT]

That's correct, the hole shouldn't harm the turning if you be careful

[@carlosariffin6812]

Couldn't you just use another stronger magnet to extract the magnet?

[@Zveroboy23]

Hello. Which cube should I buy? I have rs3m 2020. Wrm v1, wrm 2020, gan 356m, maybe tengyun v2 m? Or cheeper. Can you help me? I not much like rs3m

[@CubeMasterYT]

I don't think I'm the best person to ask for advice lol. I personally like the Meilong M but haven't really tried a lot of those cubes, sorry :(

[@Zveroboy23]

@@CubeMasterYT don't worry! Be happy 😃

[@jameschea.]

What company do you think will make the next squan and when Do you think moyu might make a flagship squan or a mgc squan will ever be made

[@CubeMasterYT]

Probably YJ since there has been another leak on the MGC Squan, but one from Moyu would be great! Hopefully it comes out soon

[@lionellthesman3060]

@@CubeMasterYT weilong wrm sq1

[@johnmurray9462]

Nice video

[@sohandesai2135]

Can this work for any pyraminx?

[@CubeMasterYT]

The setup itself should work with any Pyraminxes, but the mods are made specific to this GAN pyraminx (although they can be implemented in other pyraminxes as well in a different way)

[@sohandesai2135]

@@CubeMasterYT Thank you!

[@UniversodoCubo]

+1 like and +1 subscriber.

[@ehamady6]

Washer size please...

[@ehamady6]

I ended up making custom brass washers with a 3/16" hole to fit over the stem.

[@v.rcubing4030]

Actually the rs3m washer works well ..

[@CANVASARTS123]

I'm watching this without a gan pyraminx 😅😅😅😅

[@void1776-0]

how are you

[@uuuunkfb]

한국인 손!

[@vybz352]

I don't do pyra but I just wanted to give you some watch time.

[@CH-rk7ww]

A challenge I wish you do: Can You try solving a square-1 using left hand for slices? Please🥺?

[@blizzzey6477]

he solved a square 1 upside down and the is basiclly the same bc the bigger piece (where ur thumb shouldnt be) is the piece where he had his thumb on and its actually the same expierience/feeling

[@enjoymacubingskills]

Is he tired of making vids???? Idk poor him

[@enjoymacubingskills]

This was a great video anyways

[@sydneylangsam1530]

First

[@sydneylangsam1530]

First