HOW TO CLEAN A CARBURETOR ON A TORO SUPER RECYCLER

[@glenpacyna]

They don't make em like they used to! Shows that if you take care of something it'll last. Great job JB!!

[@GarageGear]

Got that right Glenpacyna! A little maintenance here and there goes a LONG way! Thanks for watching my friend! 👍

[@dennispost433]

I just completed all of the maintenance steps that your video showed me how to easily perform. It started the first pull also!!! Thank you sir! You are right this model is built like a tank! Mulches grass like a dream.

[@GarageGear]

ROCK ON Dennis! These mowers are the best! Keep it running!

[@berardia4]

I picked up one like it on Craigslist for $20 in non running condition. Turned out to be no compression and worn rings. Rebuilt the engine and now it works and cuts great.

[@GarageGear]

These are great machines if you can keep them running! Thanks for sharing Al!

[@jorscorer3344]

I can’t believe how clean the carburetor is for being 22 years old! Well done!

[@GarageGear]

Hey Jor I did a cleaning on it about 7-8 years ago. It wasn’t terribly dirty right off the machine this time around. Probably dirty enough to cause it to run rough. Thanks for watching bud! 👍

[@Disdained_talent1]

After watching several of your videos regarding these vintage Super Recyclers I got interested in purchasing one. I found one locally for $100.00. Mine may be older, it has the 6.5 Briggs, aluminum deck, and three speed console. Also electric start. Deck is perfect, not a scratch. I checked the oil and gas. Took off the bag and cut the grass for the last time. Didn't use the bag. Did a quickie oil change and put a bit of Stabil in the tank with some non ethanol fuel. Can't wait until spring to give it a full service and detailing. In one of your videos you said to grab one of these if you see one. So, I told the wife that it's totally your fault!!😁

[@GarageGear]

Hey orange! No worries I’ll take the blame! Lol! Tell her you got a mower now that will outlive any of the new crap that’s out there! 👍👍 thanks for being a cool fan!

[@Eltortor]

I really appreciate the video . Just got my brother in law’s toro . Going to try this tune up and see if I can get it running . Really like your presentation style and energy. Simple concise direction

[@GarageGear]

I like to get to the point round here lol! Thanks for watching!

[@LIVLIFE4GREENDAY]

Thanks for a great tutorial--my Toro now runs like new! Saved me a big repair bill for sure!

[@GarageGear]

Awesome Liv! Glad to hear she is back up and running! 👍

[@bridgetbrody578]

I did it!!!! You’re steps were clear, excellent and easy to follow. (With a lot of rewatching). I have the exact same mower with a very similar story! Thank you!!!!

[@GarageGear]

Hey Bridget!!! AWESOME! Glad you got it running! Very cool to hear! Proud of you! These mowers can last a very long time if you know how to take care of them! And how cool is that, that it has a similar story!!! Thanks for watching! 👍👍

[@burton6849]

Thanks for the video!! I bought one of these 4 years ago used for $100 bucks. was about the same age as yours. intended on buying a new mower eventually but then I found out how great this thing was (and how I would have to spend a bundle to get anything comparable that is built today). came here because its not starting after sitting for the winter. if you see this - I was trying to figure out if I'm getting the full amount of power out of the self propel , and if theres anything I can do to check that out. thanks again for the video.

[@GarageGear]

Hey Burton. You could try putting on a new belt. Perhaps that one is old with less grip. Thanks for watching my friend!

[@kylebrown7636]

Wish I had found this last night. Just worked on my carb last night. My mower is about the same age as the one in the video.

[@GarageGear]

Howd the carb clean go? Thanks for watching Kyle!

[@kylebrown7636]

@@GarageGear It seemed to work during a 60 second test. Full yard test coming this weekend.

[@robertkreachbaum4546]

Great video! You should call that Lawn Mower "Old Reliable."

[@GarageGear]

Thanks Robert! I agree! I think the big thing is that this mower has never had time to sit and seize up. It’s been running every season. And those old toros were about as close to commercial grade as you could get. They were very well built. I’ll tell ya this, if I see one on Craigslist for sale, IM BUYING IT. They just last and their cheap to fix plus they cut great! Thanks for watching bud!

[@robertkreachbaum4546]

@@GarageGear I've got a old Toro Recycler (not a Super Recycler) that I'm going to fix up over the winter & sell next spring. It should be a fun project.

[@jimmysgarage9068]

Cool history on the mower - it's great to have "heirlooms" like that, especially when they still get the job done after so many years. Have you tried using a ultrasonic cleaner for these small carbs yet? That's next on my list to purchase & try.

[@GarageGear]

This toro really is an heirloom lol! Pretty remarkable! I really should give an ultrasonic cleaner a shot. Heard many good things about them. Could be a worthy investment. If you get a hold of one let me know. How’s the new addition to the family?

[@d3signbiz]

Great instructions on the tune-up

[@GarageGear]

Thanks for your positive feedback Steven! Thanks for watching 👍

[@daveshostack4950]

i need a photo of the cabe that is attached with a bracket on the front of the lawnmower above the spark plug since I forgot how the bracket goes on which keeps the cable from moving around that attaches I am assuming to the carburetor on the right side of the lawnmower

[@GarageGear]

Id send you a pic if I could but unfortunately I gave that mower away to a subscriber of the channel last year!

[@norge696]

I have a 2005 SR4 as my main mower. Engine swapped. Deleted the BBC. Autochoke, no primer. Blacked out the ugly gray wheels. It's pretty sweet. I'd say they're entry level commercial machines. They're well built. Good video JB!

[@GarageGear]

Very cool Norge! What kind of engine did you put on it? Thanks for watching and sharing!

[@norge696]

@@GarageGear Same engine that came off it. 190cc briggs except with a standard toro shaft to accept a stock blade adapter. 25mmx3-5/32" Shaft, 7/16-20 tapped hole. I also deleted the bail handle so I can pickup sticks at my own will without the engine dying.

[@GarageGear]

@@norge696 ok very cool! You really modified that thing to your liking! Nice work! 👍

[@chocloditelensman]

I may have to clean my carb just for fun now that I know how to do it. Thanks !!

[@GarageGear]

ROCK ON SPOOK! Thanks for watching

[@js12278]

This cleaning could likely fix most of the mower problems people have. Great video!

[@GarageGear]

I fully AGREE js12278! Most engines have similar designs and could be fixed using these procedures! It’s always satisfying to hear that engine run after it’s been cleaned! Thanks for watching bud!👍

[@chrisssmallengines7163]

I would remind him of its history , and the great mechanical condition and no mower made today will come close to this reliability and dependability so he better take care of this mower .

[@GarageGear]

Oh he knows! And I’m buying it off of him when he’s done with it… if ever lol! Thanks for watching!

[@bradbelter738]

Hey JB, great video! I've got that model and noticed that your brother in laws has the paper air filter, not the original oiled foam. I've read pros and cons of both. Which do you believe is better for the engine? I have no issues cleaning the foam with dawn and re-oiling. Do you think paper catches smaller particles, assuming theres no tear? Thanks!

[@GarageGear]

Hey Brad the paper filters are original. The oil filters are aftermarket. I avoid those oil filter because they can gum up carburetors. Mechanics see the same issues with throttle bodys and O2 censors. The paper ones work just fine.

[@lollycarrillo3592]

Thank you for sharing, great tips and you make it look easy. Now I'm going to see if I could get my husband to help me and show me your video. Thank you very much

[@GarageGear]

You got it Lolly! Follow it step by step and you’ll have no issues! Thanks for watching!

[@patshu5588]

Thank you. Question, got a mower that starts,,,, just weak as heck... the grass doesn't go to the back of the bag so it acts full very quickly. How do I fix this?

[@GarageGear]

Is it running rough or slow by chance?

[@skyemac8]

My 2003 SR is still a beast. Great work!

[@GarageGear]

They’re great mowers my friend! They can withstand the test of time unlike a lot of this new stuff nowadays. Thanks for watching skyemac8!

[@venenoreyes5393]

Thanks for the explanation!!

[@GarageGear]

You got it my friend! 👍👍

[@BigDaddysGarage]

EVERYTHING about this video is just awesome!!! 👍

[@GarageGear]

I know you’re a BIG FAN of these types of videos Flint! Got more coming soon! 👍

[@gradydavis1610]

Help! I've got a 5.5gts Toro Recycler that's leaking gas. I pulled the aircleaner and cover off to find two gas inlets on the carb. One has the line coming from the tank and the other has just a 3" angled hose going to nowhere and I can't find any place it should go. Any suggestions? The short hose going nowhere is the one leaking gas. Thanks.

[@GarageGear]

Hey Grady I’d have to see it in person but I’m guess the short tube is the breather tube that hooks onto the back of the air intake plate. I would clean your carb out and check everything inside. Usually that’s where the problem is. 👍

[@jamestyrer6067]

Thanks for this information

[@GarageGear]

You got it James! Thanks for watching!

[@aceisastud]

Totally hold on to that gem! Thanks for the video! I’m about to do the same to my 17yr old Toro Recycler! Wish me luck!

[@GarageGear]

You got this Chad! Thanks for watching!

[@MixingGBP]

JB's Bro in-law: "Hey bro, how's my mower tune up coming along" JB: "Mower, what mower?"

[@GarageGear]

Hahaha right??!!! Lol! 😂👍

[@brucewmclaughlin9072]

So grabbed the wrench to undo the bottom of the carburetor and that 10mm nut is round. Tried the vice grips on that round nut , it is almost like it is welded on , not budging! Amazon has it available for 20+ bucks plus shipping so that is the next buy .

[@GarageGear]

At that point go for it

[@brucewmclaughlin9072]

@@GarageGear so between now and then I will throw in some seafoam and maybe that will do something?

[@GarageGear]

@@brucewmclaughlin9072 perhaps. I would just hit it with the carb cleaner! Don’t over think it.

[@brucewmclaughlin9072]

@@GarageGear I went out with the threat of seafoam and opening the formerly full gas tank noticed that it was empty. So I must have a leak somewhere. Any clues? gas line appears intact?

[@GarageGear]

@@brucewmclaughlin9072 not sure without seeing it up close. Put a little gas and some paper towels around the engine to check for leaks!

[@randalmorris2076]

Great video! Your brother-in-law should thoroughly clean this mower and ceramic coat it. Get another 22 years out of it!

[@GarageGear]

He could definitely do that! The deck is still in great shape. Some discoloration but this works as it should. Probably would get another 22 years out of it. How’s life treating you this week Randal?

[@randalmorris2076]

@@GarageGear Life is good! Keep up the great videos! Thank you!

[@GarageGear]

@@randalmorris2076 you got it Randal!👍

[@camom494]

I personally would have stuck with the recommended conventional 30 weight or maybe conventional 10w 40 if the motor is super worn. I think full synthetic is an overkill for those briggs quantums. if that engine is worn synthetic will do worse than good. It will burn faster and expose potential leaks. Otherwise great video. They sure don’t make mowers like they use to these days.

[@GarageGear]

Thanks for the tip Moore! You’re right they sure don’t make them like they used to. Thanks for watching!

[@stevep9098]

I have a 5.5 hp from 1995 that is running rough revving up and down. The air filter looks fine and so does the spark plug. Should I clean the carburator?

[@GarageGear]

Hey Steve! If it’s surging it’s a good idea to clean the carb. You’ll be happy you did! Thanks for watching!

[@herbbot8241]

i have one from the 90s too im going to take it apart and clean it out, lets see if it runs!

[@GarageGear]

Give it a shot! Let me know how it works out for you!

[@Clearanceman2]

Mine doesn't want to start easily but Once it starts it runs well and restarts well. I noticed when I pump the bulb a bunch of times before trying to start it, the gas runs onto the deck so I think the bulb isn't pushing the gas where it needs to be to prime. Something clogged I can check?

[@GarageGear]

Hey clearanceman! I’m wondering if you’re priming it too much? Or too many times? If it does it all the time I would clean the carb to see if that helps and any other surrounding parts. 👍

[@Clearanceman2]

@@GarageGear OK, I need to look more carefully, the path the primer pushes the gas into the carb may be somewhat clogged so it's not getting into the carb but just running down on the deck when I primer too much. And yes, I might be primering too muc but three pushes does nothing and 10 does nothing but cause dripping gas so I think it's clogged.

[@GarageGear]

@@Clearanceman2 give her a look and let me know what you find! 👍

[@markb5441]

Thanks for your video. My 5.5hp is 25years

[@GarageGear]

Hey Mark they are great machines if you take care of them! If I find one on Craigslist that’s in decent shape I may just grab it lol! Thanks for watching!

[@mikegrappone9078]

well done. keep it

[@GarageGear]

Haha I shouldn’t give it back lol! Thanks for watching Mike!

[@davboston]

Ha just saw my handle up on the whiteboard 👍🏼

[@GarageGear]

👍 I appreciate the cool comment you left a while back! Thanks for being a cool fan of the channel Dav!

[@AllSeasons2020]

Love the vids man keep it up. Preferably more mower and blower trimmed tips and tune ups lol

[@GarageGear]

Awesome MP! Love the feedback! Plenty more content coming up! Got two snowblowers to work on! Stay tuned!

[@irongoose3865]

You cleaned it, don't give it back!

[@GarageGear]

Hahaha when he decides to upgrade he’s giving it back to me lol! Don’t worry I’ll get it back someday! Thanks for watching Iron goose!

[@WhitieInVermont]

Very thorough cleaning. Outstanding job. Your brother in-law is a very lucky guy to have you there to help him out.

[@GarageGear]

Hey WHITIE!!!! Good to hear from ya bud as always! We’re both lucky to have each other around. We help each other out a lot! How’s life treating ya lately?

[@WhitieInVermont]

@@GarageGear life is good. Glad to hear that one hand washes the other in your relationship with your brother in-law. That's awesome!

[@ChrisBre1]

Excellent videos!!!

[@GarageGear]

Appreciate you Chris!

[@unknownone8479]

Is it still about the same for these plastic carburetors?

[@GarageGear]

Kinda is! Thanks for watching

[@nateyoung8633]

My mower wouldn’t even start, after this video it runs like new 👍

[@GarageGear]

Awesome Nate! Glad this video helped you out!

[@gpsacme]

Why not use the old gas coming out in the drain pan for cleaning the grime on and around the carb. You will save quite a lot on expensive carb or brake cleaners

[@GarageGear]

Totally do-able! I have done this before. Getting in the jets though does require carb cleaner. Thanks for sharing gps. 👍

[@juggalojjr]

Good place to get a carburetor for that lawnmower

[@GarageGear]

eBay or Amazon should have them just match up the model number. Thanks for watching jugg

[@assueropereira2714]

No offense but if it still works why wouldn't u want to keep it specially since u know so well how to keep it tuned & working correctly really no brainer dude but kudos on the t7ne up help me learn how to do it myself also & thanks! Stay blessed.

[@GarageGear]

Hey assuer that mower belonged to my brother in law. Have it back to him when I was done filming with it. Appreciate you and glad this video helped you out!

[@steveturner2763]

How many mm was the bowl nut?

[@GarageGear]

Hey Steve not exactly sure. Are you doing a similar repair?

[@mattharms1670]

I did all of this and now gas is leaking out of the connection to the air filter. Any thoughts?

[@GarageGear]

Hey Matt, what connection are you talking about to the air filter. The air filter rests right in front of the carb so I’m wondering if you tipped the mower on the air filter side leading to it leaking out. Let me know! Thanks for watching!

[@johnnymoore7480]

I got one just like that one! It’s a work horse! I’d keep it if had a use for it.

[@GarageGear]

You dont mow with it anymore?

[@garydunnjr8176]

Think your bro in law needs to watch the previous videos and make that mower new again…for being an older mower it looks good. Needs some TLC on the exterior though….

[@GarageGear]

Yeah he’s a busy guy. Two little ones running around. He’s got his hands full! I wanted to clean it for him but I’m time is not on my side lately. How have you been bud? New job position going well?

[@garydunnjr8176]

@@GarageGear you’re a good brother in law!! Yes, the new position is amazing, so much less stress and a lot to learn!!

[@GarageGear]

@@garydunnjr8176 great to hear bud! You’re too cool of a guy to be stressed! 👍

[@erikpena122]

When you take out the needle you might wanna take out the seat also if the float doesn't close right due to the needle gas will mix with the oil the seat also can have debris

[@GarageGear]

Hey Eric! Almost every time I take out the seat I find a usually do more harm than good. I either rip or ruin them. Occasionally one comes out fine but then when I have a new one to put in it won’t go in right… go figure lol. Found it easier over the years to just spray them clean really quick. Thanks for watching.

[@Mylife-of2vg]

I found one almost the same looking can you please till what can of oil can put it a toro gts 6.0 super recycler

[@Mylife-of2vg]

It runs it look like it just got one drop of oil in there I would like to make sure what kind

[@GarageGear]

@@Mylife-of2vg hey my friend! 5w-30 full synthetic works great in these machines! Can’t go wrong with it! 👍

[@Mylife-of2vg]

Thank you God bless you

[@campbellpaul]

Nice

[@GarageGear]

That’s a nice mower you have on your pic! These older mowers are great and built so much better. 👍

[@campbellpaul]

@@GarageGear The one in my pic is a new-old stock 20622. I broke one in that went 6,000+ hrs and still had good compression due to its bearing design and chrome compression ring. They really are gems. Nice video!

[@GarageGear]

@@campbellpaul wow! 6000 hours! That’s crazy! I’m telling ya, if I see one of those in decent shape on Craigslist I’m buying it lol. Garage gal might question a third mower in the garage though!

[@campbellpaul]

@@GarageGear I drove 50 miles for an '89 22035 just two months ago in fine condition. I'm about at my limit, though, with six 😂

[@GarageGear]

@@campbellpaul HOLY COW 6??? The garage gal wants me to get rid of all but one lol! That’s quite the collection I bet! Those older toros were the way to go! Email me some pics when you get a chance! Would love to see them! Thanks for sharing bud! 👍

[@danieltatem7747]

I read the caption as Toro with a supercharger 😭 idk why 😂

[@GarageGear]

That would be something wouldn’t it? Lol! Thanks for watching Daniel!👍

[@charlespatiencemcintosh6592]

You forgot to install the felt gasket between the carburetor and the primer housing.

[@GarageGear]

Thanks for sharing

[@joemc111]

Neighbor 9:24 crap William must be making another video.

[@GarageGear]

Hahaha do this at least once a week! Lol

[@johnhouli3450]

Give it back but with a warning of if you sent it back with no oil you keep it.

[@GarageGear]

Hahaha Right?!!! Thanks for watching John!

[@Mennoboys]

That was the air filter it was starving the engine so there wasn’t enough air, and the spark plug wasn’t helping

[@GarageGear]

Right on! This mower definitely benefited from a tune up! Thanks for watching Tyler!

[@jimweigand8937]

Why did you use 5w30 and not sae w30

[@GarageGear]

Hey Jim, I know and trust two mechanics that teach small engine programs at tech schools and have been doing so for 40 years each. They both agreed that 5w-30 full synthetic is they way to go for most small engines. Been following their advice for years and it hasn’t steered me wrong. Thanks for watching!

[@daniellang6112]

Ethanol free all the way!!!

[@GarageGear]

You got it! 👍

[@Mark-Marine]

The only thing you should give your brother-in-law is a beat down for not properly maintaining a piece of equipment that means something to you. Then again, I have no in-laws that I actually like.

[@GarageGear]

Haha he’s a little busy at the moment with a 3 year old and a one year old. We got to cut him some slack. Lol. I told him he’s not allowed to sell it! I’ll be getting back when he’s done with it! Thanks for watching Mark! 👍

[@DefensorFortis]

You should have made him give it a proper wash before letting you work on it. He could even watch your video on how to clean a mower. Lol.

[@GarageGear]

Haha I did warn him that this mower tune up would probably end up on KZbin lol! He just needed it fixed fast! Seen way worse though! One guy brought me one a long time ago with dead mice under the cover lol. Must have been outside for a long time! Crazy!

[@weschaffin]

Keep it. He’s just a guy that married your sister…😂😂😂

[@GarageGear]

Hahahah he’ll understand!

[@goldriderlc]

No give it back to your brother-in-law you have a much better mower.

[@GarageGear]

I have it back to him! Thanks for watching Richard!👍

[@norcoauctions]

you don't need to be so annoying and boisterous. I appreciated your video but you are too dramatic. I am more of a donyboy73 afficianado. He is the best on youtube. Maybe you just had too much coffee. I do appreciate you though. Thank you for sharing

[@GarageGear]

Naturally energized. Thanks for watching!

[@Eltortor]

I really appreciate the video . Just got my brother in law’s toro . Going to try this tune up and see if I can get it running . Really like your presentation style and energy. Simple concise direction

[@GarageGear]

You got it my friend! Get right to the point around here! 👍