Garrett AT Pro - Settings & Tips

[@rhoadblock12]

We need more videos like this, good job explaining the subtle differences between trash and treasure. It really helps.

[@Johnsonz4a]

This has got to be the best at pro video on KZbin. This has all the info I've been needing in 10 minutes. Thanks!

[@perkorsgaard7608]

This video is one of the best instructions in metal detecting, I have learned so much from it

[@namdogtag]

Had my AT Pro for a couple of months....each day I learn more and more about the use of it....it takes practice....I was detecting an old pottery mansion near the Ohio River a couple of days ago and dug up two old pennies and a diamond ring....AT Pro works great!..nice video also

[@stephenhall1497]

Same here I'm new user to at pro international I'm getting they now bing bong bong 😆

[@RHYGAR1]

This was one of the Best and most Informative videos i have watched about Metal Detecting...And i thought i new how to read my AT Pro.. You taught me alot my Brother, and i thank you.. Profusely! just wanted to say that word "Profusely" It's Cooooool

[@TheMrfreedomrequired]

Very awsome thank you, just bought the At pro first tried tonight with only a few caps, pull tabs and 1 penny. Thanks for the great tips I will definitely utilize them in the future.

[@hawkrock1356]

I always enjoy your videos Madison. Due to the fast recovery speed on this AT Pro machine I find myself using it more and more in the dry sand at the beach, and I save my Explorer for the wet salt sand and the times of erosion. After watching your video on comparison VDI readings and tones I took it to the beach and had a huge 4rth of July with an abundance of everything. Very thoughtful info you post-Thanks.

[@jabberjab]

Good tips, having trouble with my AT signals and deciding what to dig. This vid helps. Cheers

[@theoriginalmungaman]

Just started using an AT PRO and have been digging up junk! I learned more from your video than I did from the dvd that comes with the machine! Thanks.

[@MadisonMainedetecting]

Thanks. Keep on digging the junk out of the ground its normal to dig a lot of trash. GL&HH

[@N2MD]

Thank you for uploading this video I found it very helpful. I just got in to MD and purchased an ATP. I am still trying to learn it's audio sounds and what they mean. This video was very informitive. Thanks again.

[@iamavoidtrippergutterslush666]

Same here. ✔️💯🏆

[@bjones1739]

Have been contemplating buying an AT PRO your video has convinced me to go ahead with the purchase Thanks

[@countrydirtkid4451]

When I saw this video I thought this is exactly what I needed I hope this guy still post. Turns out yes so I subscribed. Thank you

[@MadisonMainedetecting]

Thankyou Country Dirt Kid

[@sco3592]

I Really needed this, thank you. The actual use in action is very helpful to me.

[@SapperX41]

Great video and tips. I just ordered my AT pro today! Cant wait to get it! I learned alot, thanks. HH!

[@patrickcieslak7858]

One of the better videos I have seen on the AT-pro in the pro mode thanks .

[@MadisonMainedetecting]

Thanks Patrick, I do get a lot of positive comments on this video even thou it is 4 years old. GL&HH

[@ktrumble8]

thank you....this video was very helpful....i just purchased a used at pro.....i am also from maine.....bucksport.....but 3 1/2 years ago my husband's job moved us south to virginia.....i enjoyed listening to your accent

[@MadisonMainedetecting]

+ktrumble8 Thanks you might enjoy We R Maineiacs series coming soon.

[@MadisonMainedetecting]

I am glad to share some of the things I've learned this year using the AT Pro

[@MadisonMainedetecting]

@Sam Reynolds I am here. What is your question?

[@Casper6858]

I'm def a rookie but I popped a silver really fast and learned how to not dig trash with my pro... But I didn't know or understand the iron audio mode. I can't wait now that I know! Thank you!!!!!!

[@ThelifeandtimesofBarneyTaylor]

Hey dude KZbin brought this up man that was a while back you still using the pro or did you get something better like the 800 I'm still using the ATpro but I bought a simplex from a friend I'm not liking it so far but maybe I'll get it still want the 800 maybe one day. Have a great weekend see you soon

[@norseman1137]

What are the best settings for Max depth using Goliath 15” coil normal farm pasture

[@MadisonMainedetecting]

I would recommend Pro Zero mode with nothing notched out. I recommend setting your high-resolution iron to 28-32 with the iron audio on. You will know if you find a patch of iron. Iron patches will require smaller coils and slower swing speeds. Have your sensitivity as high as stability allows.

[@norseman1137]

@@MadisonMainedetecting Many thanks

[@tomgrieve8604]

Very informative, I like the tip on using the iron audio. Saves a lot of needless digging

[@jackbeltane]

nice to see another fellow AT Pro user

[@MrGerryodonothing]

Nice vid and good tips. I followed your advice and went on my first hunt ever today and my sixth target was a gold ring. AT Pro all the way.

[@MadisonMainedetecting]

MrGerryodonothing Congrats, I know I am late to reply. GL&HH

[@MrThedocholiday]

I really appreciate the tips. I don't have a Garrett but most of your tips are relevant to all detectors. Thanks a mint & good job on the video...

[@bmk5529]

Thank you! You’ve helped a lot.

[@jkjdkc]

Great!! I just got atpro as a gift and have no idea what I am doing yet. Hope for more videos like this one!

[@MadisonMainedetecting]

Good luck with your AT Pro I am glad that my video helped. HH🤘

[@chesterb4339]

I love metal detecting!

[@kimhamm3021]

Thanks for the tips. Getting my AT Pro this week and looking forward to having fun with it..

[@badapple65]

I know this is a year old or so, Your tips are spot-on... but one thing not covered here is Ground balancing. I auto ground balance. Then, what ever ground balance ID number it shows I go in to manual balance and go one to two clicks higher than that. So if an 86 shows I manually raise it to 87 or 88. This seem to make is chatter a little more but the ultimate in depth reading.

[@MadisonMainedetecting]

greg appelgren The general consciousness among most AT Pro owners is you reduce the auto gb by 5 to 8 to gain depth. If your machines chatters more by raising the number then I would say its just falsing. Everyone has different soil conditions so what might work where you are at might not be true here. Also I don't run my iron at 40 anymore. I put it on 30 or 31. GL&HH

[@michaelnone6322]

greg appelgren its almost 3 years old :P

[@MrThedocholiday]

+Madison Maine There seems to be some discrepancy between which way to adjust the ground balance to make it more or less susceptible to mineralized soil conditions. One person says raise the number to stabilize the unit & another person says to lower the GB number to stabilize the unit. Can you tell me which is it?

[@RavenTheLabrador]

+Duster Dan listen to your at pro when doing it. When the sound goes away its good going up is how you will do this most times

[@MrThedocholiday]

Matthew King Thanks Matt...

[@roz4747]

Any tips to make it more comfortable???

[@navythomas8]

I like the way you do this. Yesterday I dug a 99, and never found it. Eventually lost it entirely, any Idea? and yes I have the AT Pro also.

[@PeakyBlinder]

very good and informative vid

[@martelgopro]

Hola amigo Madison gracias por los tips :) Saludos desde NYC in my case usually I used the PRO COINS

[@AustinAdams]

Loving my new Garrett Pro. Nice video and thank you for the tips.

[@MadisonMainedetecting]

No problem good luck.

[@michaelklinge1857]

thanks for the tips and taking the time i have had much better results since ive used your settings for my at no more ghost signals and been digging less trash found a nice ring and a bunch of coins right in my door yard

[@MadisonMainedetecting]

Thank you for the comment, it made my day. I am glad to have helped you. This video is six years old but I used my AT Pro today with the same settings except I drop my iron audio to 35 these days. HH

[@jsmilers]

excellent job. Thank you very much for taking the time to make this video

[@GWoods-rc5xw]

Great vid M.M., thanks for the tips. I'm new to hunting. Love my Garrett AT Pro & Garrett Carrot pointer. Still learning on it. Took it in the river last week, that was fun. Keep up the good work. GL&HH

[@MadisonMainedetecting]

Welcome to the hobby. It sounds like you are off to a good start. GL&HH

[@ChingFong58]

Hey Madison.. Im your neighbor in Starks. Had a good first year detecting last year. I just upgraded to the AT pro and will be arriving today. I started an interest page on FB. I have several people on. All are novice or no experience. Most have a detector of some sort tho. We are going to try to get together some hunts this coming season. I know youre not interested in group hunts tho.

[@MadisonMainedetecting]

I am interested in group hunts, have you seen We R Maineiacs videos on this channel. How do I find your FB page?

[@MadisonMainedetecting]

Thanks I try to pass on what I have learned on the AT Pro.

[@1uptospeed]

thanks madison for sharing your knowlege..is that pilot wings in your incon, if so i thank you for your service,

[@MadisonMainedetecting]

WWII Pilot Sterling Silver wings. Its not the oldest or most valuable thing that I have found, but I like them. GL&HH

[@MadisonMainedetecting]

I have not made one for the X-terra 705. Its not a bad idea as I am getting comfy with it now.

[@davidjohnrobinson2887]

Thanks for reply. I asked because i just purchased a used at pro. Tried it out twice so just trying to get used to it. But noticed when in the pro mode (all metal) with iron discrim at 40, am still hearing that iron sound on iron. Then when i press for iron audio i get a pinpoint sound. Think i will have someone look at it. Thanks and good hunting.

[@MadisonMainedetecting]

That sounds like its not working properly. If you want to listen to my AT Pro in Action I have a video called Strange Cellar Hole.

[@jg90gt]

From my six months of using the AT Pro...I noticed the numbers lie and you waste more time trying to tell if the target is trash.So if the tone sounds good and repeatable I dig it.It helps remove the trash from the area for future hunts and some times you get lucky and find that ring under a can or a chunk of slag.If everyone did this the hobby would be more enjoyable for all of us...instead finding out the area has been cherry picked.

[@brucehepper2448]

Nice video. Just got my pro the other day in the coil seems to swing back-and-forth is that supposed to happen.

[@MadisonMainedetecting]

No, check to see if your shaft cams on the shaft are tight. Did you insert the gaskets that go inside the holes at the bottom of your shaft? Those are inside where the coil ears attach.

[@brucehepper2448]

@@MadisonMainedetecting thanks. The gaskets weren't put in right

[@TreasureSeekerMN]

I'd like to see that relic cleaned up! Great tips thanks for sharing.

[@michaelklinge1857]

thanks for the tips i live here in sidney been trying to get used to my at i get a lot of good signals and then they vanish half through the dig any ideas would be helpful love your vid nice to see some one local using the at thanks

[@MadisonMainedetecting]

Ahh the vanishing signal. A couple of things that will make your signal go away once you open the hole. The machine will get a better lock on what it is and you have that disc out on your machine. Very common if its a rusty iron object. The other thing that can happen especially on deep coins is you remove some conductive soil between your coil and the item and you are left with an air test. What I do when a signal disappears is use my pin pointer in the hole or dig a bit deeper and use my pin pointer.

[@MadisonMainedetecting]

We don't have the Civil War stuff here in Maine. There are days that I dig most everything and then there are days I's tired and only dig the better signals.

[@MadisonMainedetecting]

I dinged it with my digger. I sent it back to Garrett back in January and they repaired it. If you watch my newest videos you will see I have a cover for it now.

[@dawndavidkarkut8341]

As a new MHer, I thank you for sharing your tips. I learned good tricks, though I don't use exactly that machine.

[@MadisonMainedetecting]

You are welcome. Most of what I talk about in this video transcends to other machines.

[@horseman528]

Have you tried the 5x8 coil? Its a killer little coil on coins in junky areas.

[@davidjohnrobinson2887]

Hi there, enjoying the videos. Just like to ask, what is the difference "in the pro modes" with iron discrimination? If iron discrim is up to 40 should you still hear readings under 40 "without" bringing in the iron audio? Thanks.

[@MadisonMainedetecting]

Good question, by the way I usually run my iron disc around 32-35 these days. If the iron disc is on 40 which means you do not hear anything at 0-40 unless you turn on the iron audio. Sometimes listening to the iron audio can become tedious. Remember the iron audio is there if you want to turn it on to hear more info. It is hand when checking likely steel bottle caps.

[@PeakyBlinder]

you should try the nel snake on that atp, it works great in junk piles

[@phazek2]

what is the difference between the AT PRO and the AT PRO INTERNATIONAL..thanks

[@MadisonMainedetecting]

From what I have seen from my friend Aussie coin hunter's videos, the only difference is the depth indicator is metric on the international model. The other version gives depth in inches. A good question to ask Garrett Detectors. GL&HH

[@DiggingMichigansHistory]

Just got my AT Pro today and found this pretty helpful, thanks!

[@MadisonMainedetecting]

You are welcome. Good Luck & Happy Hunting!

[@craigvietor6891]

do you dig even if its a faint sound over ten inches

[@MadisonMainedetecting]

craig vietor Yes, that is where you usually find those older coins. If you don't want to dig every little thing then open a nice plug and scan again. If its iron it will usually id as iron better. If the target ids better its most likely not iron.

[@runningturtle4815]

Thanks for the Video ! Question >>> Lets say someone buried a coffee can with silver coins in it ? How do ya think that would that come across on The Garret AT Pro ? I have both the AT Pro & AT Max As well as a Minelab Explorer. I have had Great success with All 3 detectors. However, the Explorer does have quite a bit of a learning curve Imo.

[@MadisonMainedetecting]

A coffee can by itself will ring high. A good question. I bet it would ring about the same with or without the silver. I might have to try that though. HH

[@MadisonMainedetecting]

You are welcome and thank you for watching.

[@chriscaz1239]

What the difference between all metal mode and zero mode?

[@MadisonMainedetecting]

Zero mode has nothing notched out but you still have iron disc. True all metal is featured on the AT Gold.

[@iamavoidtrippergutterslush666]

@@MadisonMainedetecting so even though the AT pro was $600, there still is a better one? AT Gold? Darn it, I thought I had the best one? Figures. Best one at store I was at anyway, only 1 left which is the one I have now. I'm in Montana, wish I woulda found the Gold one. :'(

[@stumpy351c]

The most helpful video Ive seen thank you.

[@MadisonMainedetecting]

+stumpy351c This video gets a lot of similar comments. I am glad it was helpful. GL&HH

[@ukeplaya1]

Great video! I wish there were more like this.

[@OregonDigger101]

If you run your iron disc is at 40 you will skip good targets that are right next to a low signal iron object. If you get a signal and dig it and it disappears then its most likely a iron orb. When something small risks in the ground it makes a sphere and rings up as a good signal.

[@CoinGunnerTex]

Good tips, that's pretty much how I dig. Do you have a similar video with the X-terra 705? I just got one of those to complement the AT Pro and I'm a bit lost with it, especially in really trashy areas.

[@TreasureGuy.]

Just watched your At Pro tips there Richie. I will try those out tomorrow in the cornfield for sure..Good video buddy!

[@MadisonMainedetecting]

Clem set your iron audio at 31ish and if you can listen to it turn the iron audio on. GL&HH

[@TreasureGuy.]

Thanks buddy paid off big time State Copper!

[@detectingdiaries725]

Thanks for the awesome tips!

[@capt.saveahoe914]

I'm new to metal detecting and I'm getting ready to purchase an AT Pro. I've been watching a bunch of hint and tip videos for this model of detector. I'm wondering what spot on the search coil you use to locate things. Some say they use the tip where ot says Garrett, others say dead center in the middle... Was also wondering what's a good cheap detector for my 9 year old son. For the price of a kids detector, I can find a decent normal one. Thanks!!!!

[@MadisonMainedetecting]

Since the AT Pro comes with a DD search coil anywhere down the center is where you will be receiving feedback. I have never noticed a difference between the center or either end of the coil. If I was to buy a metal detector for a kid it would probably be a Go Find or one of the Ace series machines.

[@capt.saveahoe914]

Thanks for the reply! Keep up with the great videos!

[@capt.saveahoe914]

Appreciate it Subbed

[@SaltLakeCityUCE]

Thank you for the cool video, I should have my detector this next week. That relic looked kind of like a Military Metal.

[@fifabanter9030]

Hi recently I found when I get a good signal I bounce the detector up and down over the signal. I often find it reads a high number but when bounce it it's often lower than a 10 can you tell me why? I get so many signals that come up with a number but when I go to re scan it I can't find it. Thanks for your help.

[@MadisonMainedetecting]

+Fifa banter If I understand the questions correctly, you want to know why a high tone signal turns into a lower tone when you raise the coil away from the target. The other question is why do you lose signals after you dig them. Rusty or large iron objects will false as a good signal while buried. Often when they are dug the false signal will correct and you can lose the signal if it discriminated out. I also find that if you lose a signal after removing a plug that it is time to poke around inside the hole with the pinpointer. This happens when you lose some detecting depth due to losing the moisture of the dirt that you have removed. Its now like doing an air test. When you bounce a coil up and down over a target, a smaller target will fade quickly possibly read a lower number and a large one will be strong high above the ground. If you don't use a pinpointer, might want to get one. I hope this helps. GL&HH

[@timbotide]

Are there any other detectors in the same price range as the AT Pro That perform just as well? I'm looking to get back into the hobby and like your videos.

[@MadisonMainedetecting]

I use the Minelab Xterra 705 too. Some like the Teknetics/Fisher models and if you are willing to go analog there's Tesero.

[@Hidden_Destinations]

Great video!

[@MadisonMainedetecting]

You are welcome and thanks for viewing.

[@metalsharxs]

Nice tips! Think this will help me be more accurate in finding coins & relics with my trusty AT Pro. 😎👍🐠 Your more recent vid with tips for building channels drove me here.

[@Enigmaprince]

is it tru about the wiring tip? I always thought it has to be tighten from the beginning of the bottom

[@MadisonMainedetecting]

If the wire is wound too close to the coil it can make your machine false. GL&HH

[@Enigmaprince]

oh ok. Thanks for the tip. I was just worried that if its taped like u suggested u could be unlucky and a branch getting stucked between the gap of wire and the stem? GL & HH

[@MadisonMainedetecting]

Keep in mind the wire is still above the coil. I have not had any hang ups.

[@martyjohnsonozarkoutdoors8198]

nice video and a cool find there at the end

[@banjony]

What is your camera set up. Its so steady

[@MadisonMainedetecting]

Kodak Play Sport held in my hand for the most part.

[@MadisonMainedetecting]

You are welcome. I am just sharing what I learned.

[@myakinees]

Thanks for the tips I sure will give them a try with my AT Pro!!!!

[@horseman528]

I don't rely on those numbers too much. If you're in a junk area with a lot of iron those numbers will jump around all over the place. If its a good repeatable signal with some good numbers mixed in with the bad numbers, I will go ahead and dig it. Found a nickel like that the other day.

[@jimallmon1994]

thanks for sharing-now if the ground will thaw ill try these out on my new AT Pro

[@MrVideoyoulike]

have you hunted nuggets with your pro? If so what settings do you set it at?

[@MadisonMainedetecting]

+MrVideoyoulike I have not hunted for nuggets with the AT Pro. I am no gold prospector but from what I have heard the AT Pro at 15 khz is not well suited for small nuggets. GL&HH

[@darrenlyons7548]

Thanks man that was some great info that really helps.

[@MadisonMainedetecting]

You are very welcome. I do have an updated version where I recommend using iron audio on at 31ish when hunting around nails. The iron audio may drive you crazy but you are aware of how many nails you are swing the coil over and can adjust your swing speed and strategdy. GL&HH

[@xyzzy1233]

Good Job. I appreciated the tips and will give them a try.

[@yeoldepirate783]

very informative it get a AT Pro user on the fast learning curve !

[@Paul-io6cb]

Just got an AT Pro today, this video is going to really help me out.

[@MadisonMainedetecting]

Glad to help. GL&HH

[@tressinar]

***** just got a new AT PRO and learning so much. I thought this video was very helpful for a beginner like me. Thank you

[@vtxdaryl]

Thanks for the tips.

[@Stoutfellow007]

Very nice informative video!

[@gregorym9591]

just starting out. verryyyyyyyyyy newwwwwwwwww. could you give me some hints on why i getting readings in mid 75 to high 90 to dig up nails, caps, flip tops, Im in pro mode custom, iron dis is at 35, i ground balanced in auto,

[@RavenTheLabrador]

+Gregory M learn your at pro in standard mode before going to pro you will find it much better good luck.

[@MadisonMainedetecting]

+Matthew King I have never used standard mode myself. I jumped right into Pro mode. I guess I didn't like binary audio.

[@mddigger8424]

great tips thanks for sharing with us.. Good luck and happy hunting Ryan

[@stonewallbook]

Great tips, but that make up case could have been a belt buckle/plate here in VA. I'd dig those signals all day long.

[@meradu2]

thank you for the video I'm getting My AT Pro as an addition to my Minelab XT18000. Happy Hunting to you

[@supafly1982]

thanks for the tip about the cable, ive just set my Euro Ace up like that to see if it helps with less coiled cable near the coil

[@stationaryenginesworldwide]

Radu Blaga I dig everything

[@stephenhall1497]

Thanks for the tip zero mode pro international cool 😎try it on the farm would it work OK 👌

[@MadisonMainedetecting]

It should work well, good luck.

[@stephenhall1497]

Thanks pal let u no

[@stephenhall1497]

What settings do you use in the woods please for the at pro

[@MadisonMainedetecting]

@@stephenhall1497 I use Zero Pro with nothing notched out. Iron Disc on 33 with iron audio on is its not too iron infested.

[@cybersoil100]

Thanks for the great video, it's really appreciated.

[@MadisonMainedetecting]

+cybersoil100 Thank you for watching. This video is a couple of years old now. Check out all the cool things I have found since making this. GL&HH

[@foxwalker1111]

what happened to the screen on your AT pro ? ..I want to know so i can try to avoid that lol.....your videos are very helpful thank you for posting

[@rjbakker6859]

Nice Video , This detector with the current setttings will be overloaded in the field. Especially with a big DD coil 8 x 11 inches , powered by 4 AA batteries only ... Regards ,

[@Waltorian]

+rj bakker What does that mean? overloaded?

[@MadisonMainedetecting]

+rj bakker Maybe where you are at but you just watched me detect with those settings.

[@MadisonMainedetecting]

+Waltorian I think he is in an area with a lot of contaminates and or EMI and cannot run the Sensitivity as high as I did in this video.

[@alanmccabe8009]

Very useful, thank you.

[@davidyancey2807]

I can't tell what buttons you are pushing or why. Nice lawn though.

[@MadisonMainedetecting]

Happy Hunting with your AT Pro

[@dhubahantesool7833]

thank you for the video

[@MadisonMainedetecting]

Awesome I am glad that you liked the video. HH🤘

[@Dustinrunyan]

I would set your Iron dis on around 35 to 32 I found a gold ring that was 35 with my Garrett AT GOLD. The ring was small so it didn't read up very High I almost didn't dig.Thought was a pop tab. so just saying.

[@angelcake4865]

Great tips! Thanks.

[@MadisonMainedetecting]

+Angel Cake (AngelCakedoesminecraft) You are very welcome.

[@nokiot9]

Finally, someone with a little dirt on their machine!