how i make magnetic clay trinket dishes and keychains🍊🍉💦 using air dry clay / no bake ft. lightwish

Рет қаралды 532,089

gazoo studio

Күн бұрын

Пікірлер: 147

@Asinna121 5 ай бұрын

An aquatic theme would be super pretty like the shrink plastic fish you did!

@mariarzyt_3D 5 ай бұрын

There's something so satisfying about magnetic objects snapping together, especially if they look that cute 🍉

@couchpotato9060 5 ай бұрын

I have been pretty stressed lately and watching your videos is so relaxing for me. Just wanted to convey my appreciation for these videos.

@nourakhaleel7505 14 күн бұрын

What I do when I get stressed is just turn on one if her videos and start making clay stuff of my own. The music is soooo relaxing and watching her sculpt is so satisfying!

@peachieclouds 5 ай бұрын

pls use safety gear when handling resin

@GodsOath_com 5 ай бұрын

Yes safety for your eyes when using the UV light

@eBookHoarder 5 ай бұрын

I find gloves restricting and uncomfortable. I use finger cots to protect the skin on my hands.

@Aestheticocoa 5 ай бұрын

@@eBookHoarderthats still safety gear, so good for u

@mariarzyt_3D 5 ай бұрын

I am glad someone has pointed that out already! UV resin tends to be quite toxic, especially for your skin. You can develop an allergy towards certain materials when you're exposed to resin too often and you reaally don't want that ;" I think it's even more important to wear protective gear as someone with such a huge following tho! Lots of people don't really seem to think about the fact that this liquid needs precautions and will just copy what their favourite creators might be doing

@SahidDrawingArt 5 ай бұрын

Thanks for the 433 subscriber ❤❤❤🎉🎉🎉🎉🎉

@Zorave-qi6fs 5 ай бұрын

Maybe try school stuff-your juice boxes magnets were so cute. Your fruits also remind me of gardening, farms, and picnics

@elveyra07sagewinkie17 5 ай бұрын

AAAAA the trinket dishes & keychains are the CUTEST THING i have ever seen!!! i luv luv luv ur videos and u inspire me to try to make some on my own, i hope u keep making and sharing ur art pieces, lots lots of support!! 💖💖💖

@angelastein8390 5 ай бұрын

The capybara in the pool is adorable. You are wonderful!

@rainncat. 5 ай бұрын

i relaly love the clay crafts you make ! keep it up gazoo ❤

@Juliette_seaturtle 4 ай бұрын

That bright pink resin looks scrumptious

@chocolatejwoo475 4 ай бұрын

MY FAVORITE CHANNEL EVERRRRR LOVE U GAZOOOO

@ellebannana 5 ай бұрын

Just finished modelling some miniatures, so naturally this is the video to unwind with 💛

@MyCozyAbode 5 ай бұрын

Y haven’t you posted videos of your art then I thought you also post KZbin videos

@zASM777 5 ай бұрын

I really love the strawberry one and the capybara is pretty cute too 🎀

@debo_linasinha 5 ай бұрын

Your videos are so satisfying to watch 😍❤

@daisy2512 5 ай бұрын

Was waiting for a new video ❤ now gonna watch these the whole week ✨

@souzarte.artwork 5 ай бұрын

One of the first ones to watch. Perfect way of starting my Day!!

@GeneYukina Ай бұрын

ur vids are so satisfying to watch!

@ekeirashaw1922 5 ай бұрын

The clay videos are my favorite 😊😊😊

@Urmotheriscool. 5 ай бұрын

I love these videos !! There so calming and binge worthy, to be honest I don’t think I could ever get bored of this :) love what you do and definitely think you deserve so much !! God bless you 💝☺️

@Dianikorn 5 ай бұрын

Your video brightened up my day!

@FashionWorld424 2 ай бұрын

100 million likes❤❤❤❤

@asmrvibezforthesoul 3 ай бұрын

Hi! I really enjoyed this video. Everything came out so cute. I would suggest wearing 8MIL gloves and using an organic vapor respirator next time. Uncured resin can cause skin irritation and also respiratory issues. Be safe and have fun! 🤩

@lzylouwho 4 ай бұрын

at 6:12 i didn’t see the glass and thought you were just magically flattening the clay

@Chaejihsa 5 ай бұрын

I love your channel so much ❣️

@shatteredscry 5 ай бұрын

Looks like you got the air bubbles ironed out 😄 congrats! ❤ I want to make a living making clay goods 😭💖💖

@gazoostudio 5 ай бұрын

omg someone notices?😭😭😭🫵🏼💗 thankyou so much sweetie and goodluck!🥹💐

@celestialblock 3 ай бұрын

Quick question does the pool clay break easily if u drop it?@@gazoostudio

@lauren-kitsuneroach 5 ай бұрын

what a nice process 🥹❤️🌸

@JessieChen-vl1iz 5 ай бұрын

OMG IT'S SO CUTE!!!!!

@Gr95dc 5 ай бұрын

I remember how you struggled for the water effect in a past video. Is nice to see you've found a technique that works for you!

@ChantelleArts 5 ай бұрын

those metallics are fantastic ☺☺

@YoungDymisty 4 ай бұрын

Hi, I think next time maybe using black subtitles instead would make it easier to read. Because it disappears, especially when you have a white background, so it’s hard to see it properly. Also, how do you use resin on your brushes without ruining them? And a tip for anyone, if you wanted texture on your fruit you can use a toothbrush to make them a little more realistic. If you’ve used resin idk how much it will show though.

@yences 3 ай бұрын

I have a short attention span but I could watch your videos all day and not get tired 😽

@elisabetheverett9285 3 ай бұрын

This is amazing 😍

@mayxqx 5 ай бұрын

5:01 , i would like to see sea creatures! Like stingrays and sharks n lil seals❤🌊

@fern7407 4 ай бұрын

There is UV resin that is thinner and will be easier to apply and self-level btw also traditional 2-part resin is very liquid and self leveling

@MichelleBoakye78 4 ай бұрын

No one is as talented as you are

@belaagustin2954 5 ай бұрын

aku bakal tonton semua vidio kamu, soalnya aku suka bgt yg beginian😭

@rina-ug6bp 5 ай бұрын

maybe something pastry themed next time(croissant, shortcake, macaron etc)? 🤔

@GodsOath_com 5 ай бұрын

When sanding you can probably use water with the sand paper.

@mayaprihatini2493 5 ай бұрын

ITS so pretty

@DIYCartoonBook 3 ай бұрын

so chill

@hanadidiary 5 ай бұрын

You're so talented ❤️‍🔥❤️‍🔥

@CluelessCow123 5 ай бұрын

yayyy!!!!!

@tismeetarora5153 4 ай бұрын

when youre shaping the clay, how long does it take for the other ball of clay to dry out

@lilBUD_ateIT263 Ай бұрын

autumn and winter keychains and trinkets plz!

@GigiJksn 3 ай бұрын

Not me falling asleep at the music

@Natsuroo. 4 ай бұрын

hello!! i just wanted to ask some questionssss. 1. do you apply the resin the whole clay art or partially (if the whole thing then how do you get it to not stick to anything like the table etc) 2. i see your using a brush, and its at good condition, how do you clean it off?

@Youcandraw2242 5 ай бұрын

That white paint bottle looks straight up like mayonnaise packet 😂

@mochakiishere 4 ай бұрын

i love that 💗💗💗

@nourakhaleel7505 8 күн бұрын

To swatch them you could have made a mini clay paint pallets and tested the resin on that!

@skyfi709 Ай бұрын

Something I’ve noticed, no hate but I think if you made slip (scraps of air dry clay mixed with water) to bond your pieces together I feel you’d get less cracking and resin leaks along your seals. But I love all your stuff and your art either way. ❤❤❤

@TetoKasane-4april1st 3 ай бұрын

I NEED those strawberries 😭🍓

@TulaAntonia 5 ай бұрын

Your clay mini's always come out s'cute!! ❤️‍🔥 i wanna sell handmade goods like this one day

@mintyepicz 4 ай бұрын

hii! do you use any tools to dry your clay and paint faster? i noticed that you use a uv nail lamp for drying the resin, so do you dry the clay/paint with the nail bed too or do you use any tools/ let it dry?

@DannyDevitoOffical-TrustMeBro 3 ай бұрын

The nail lamp is used to cure the UV resin, not “dry” it. It’s a chemical process that hardens the resin. This lamp won’t impact drying times for clay. Technically, you can speed along air dry clay using heat from, say, a hair dryer, but this might cause it to dry unevenly and crack. The best thing to do is just let it dry on its own. Hope this helps!

@moonykiyoko 4 ай бұрын

hello gazoo! can i ask how long do you dry the uv resin with the uv light? bcs when i made it it still felt sticky, and there was dust in it. do you have any tips? thank you🥰

@DannyDevitoOffical-TrustMeBro 3 ай бұрын

I’m not who you were asking for, but I do know that if your UV resin is still sticky, it’s because your light isn’t strong enough to cure it quickly. In this case, all you can do is leave the light over it for a long time-there is no prescribed limit, it’s just until the resin cures. You can also cure it in sunlight, though this can take hours. Your dust issue can be remedied by leaving it to cure in a newly dusted environment, or covering it with something transparent, like a plastic sheet. I would caution you on this, however, as excessive heat can meddle with the resin, causing it to bubble up as it cures. Plastic tends to insulate heat, because it is air tight. So if you do this, I’d avoid leaving it in a hot room, and I wouldn’t put it outside to cure if it’s an especially hot day.

@artishvlog 5 ай бұрын

You are my savior on sad depressed days.❤

@anamoarry3750 5 ай бұрын

Louuuuuuuuveee your videos

@dumpaccount-gt2ow 5 ай бұрын

i suggest that you should try making BT21 magnets or keychain🥰

@MumgamYangjom 5 ай бұрын

how do you keep the eye pin attached to the clay? mine keeps on breaking after few uses. should i use glue before the drying process or after that?

@DannyDevitoOffical-TrustMeBro 3 ай бұрын

I’ve had this issue too, and i fixed it by gluing the pin back in later with a strong glue. Sometimes, though, you can inset the pin and surround it later with an extra layer of clay right up to the post to hold it in place

@artsy253 5 ай бұрын

Resin can do serious long term damage to yourself, please use safety gear!❤😅

@BobaTeaStudios 5 ай бұрын

The strawberries look sooo good I almost want to eat them 😂😂 I wish I can do this but I'm allergic to resin, i touched some by accident from those mini verse set and my hand got an eczema breakout😑

@DannyDevitoOffical-TrustMeBro 3 ай бұрын

Everyone is “allergic” to resin in this way, it is a highly dangerous substance that causes skin irritation and even chemical burns. You should never, ever come into physical contact with it, nor breathe in the vapors it gives off when curing. It’s not an allergy, it’s actually just uncured resin being very bad for us. This is why you should always wear gloves when handling it.

@sheetalnavale Ай бұрын

instead of a uv resin can we use sheer nail polish ?? btw i love your videos ❤

@fruitydragons 5 ай бұрын

my favorite is definitely the tiny strawberries!! 🍓🩷 i have a question though, how long does it take for the gouache to dry up so that you can paint the other side as well?

@WhaleOnWater 5 ай бұрын

Hello! Can I ask what are those metal rings being inserted into the clay called? And do they fall out? I'm looking to try out clay sculpting too and it's fun to work on stuff with your video playing.

@DannyDevitoOffical-TrustMeBro 3 ай бұрын

Those are eye pins! They have a long post with a rounded part at the end to attach to a chain or other fixture. They can fall out of clay, but this can be stopped by bending a hook to the other end of the post as you insert it, and making sure to add more clay around the exposed part of the pin later. If your eye pin falls out after the piece is dry, just glue it back in with strong glue.

@angel31356 13 күн бұрын

is the clay you use light when it dries? i heard regular air dry clay can be pretty heavy after drying, google said paper based air dry clay is lighter so i just wanted to know first before starting anything😅

@cybelleqwin 11 күн бұрын

it depends actually, ive made some clay art and some of them are heavy and some dont

@angel31356 11 күн бұрын

@cybelleqwin I see thank you

@CNDIYsCorner 4 ай бұрын

So cute 🥰

@marlamat 2 ай бұрын

muy relajante, esto me desestresa

@ailieai8990 5 ай бұрын

Cuteee 🍓❤❤❤

@Mia-Brivote 2 ай бұрын

So cute

@lonewolf7660 4 ай бұрын

Requesting an season inspired keychain for example autumn, consista of maple leaves, fairy core inspired characters like mushrooms, fairies, etc.✨

@jaeclay31_ 4 ай бұрын

if i don't have a heatgun.. is a hair dryer can fix the bubble too?

@appleoneill5135 4 ай бұрын

Hi, a long neck lighter works great x

@DannyDevitoOffical-TrustMeBro 3 ай бұрын

Yes, just keep in mind that the heat from a hair dryer isn’t very strong, so if you’re working with thicker layers it won’t rid the resin of all the bubbles.

@Shambhavi-qm5wj 5 ай бұрын

for how many minutes do u cure the clear layer of resin?

@sakshitiwari8148 Ай бұрын

What are you using on the surface to make is smooth ?

@cybelleqwin 11 күн бұрын

water

@CottonCandy-ej1rv 5 ай бұрын

Do you use water to smooth the clay? Brw love your videos 😊❤❤

@WAFU_UWU_ 5 ай бұрын

Can we use regular paint varnish instead of clay varnish or resin?

@DannyDevitoOffical-TrustMeBro 3 ай бұрын

Yes. If it’s acrylic, it should work to prevent most paints underneath. Just be careful, sometimes varnishes can smudge paint around.

@lani_xene 3 ай бұрын

Question, does applying resin reactivate the gouache?

@DannyDevitoOffical-TrustMeBro 3 ай бұрын

It wouldn’t reactivate it in the same way, no. However, gouache is a water based paint, and resin and water do not mix well at all. Water will affect negatively the curing process of the resin. This is why you should always coat any water based paint (gouache, watercolor, etc) that you plan on using next to resin with acrylic based varnishes. Acrylic is a type of plastic, which means acrylic paints and varnishes/finishes are impenetrable to water, and also act as plastic seal between anything they sit on top of and anything else. In one of her earlier videos, this artist used gouache paint to tint her resin, and it came out with massive bubbles and suspended particles in it.

@lani_xene 3 ай бұрын

@@DannyDevitoOffical-TrustMeBro tysm! I want to start making clay crafts and while messing up is part of the process I'd like to make it as little as possible because of the cost of materials. This will be huge help thankyouu

@mikiCreatezArt 5 ай бұрын

Wooooooooooooow sooo cute and cool 😀 again they look like candy 😂

@WakkasLove 3 ай бұрын

I think the watermelon and the crate was my favorite. Also, as many have said, please use safety gear around the resin...gloves and respirator. This stuff is toxic!

@tweety9037 4 ай бұрын

Which app do you use for editing purpose? Btw luv your videos ❤❤

@liya_0028 4 ай бұрын

OMG this is absolutely beautiful!!!

@piarose4825 4 ай бұрын

hi! how do you avoid uv resin become sticky?

@DannyDevitoOffical-TrustMeBro 3 ай бұрын

If your UV resin is sticky, that’s because it’s not fully cured. If you don’t have a powerful enough UV light to flash cure it, you must leave it over the resin for an extended period of time until it is fully hard. If you don’t have a light at all, leave your project in direct sun exposure for a long time, an hour or more depending on how much resin there is (the sun’s rays contain UV light).

@grungophone1615 4 ай бұрын

You should get a dust collector for the sanding process!

@bushra735 5 ай бұрын

Litreally love you so much i am also gonna start a youtube channel!!!

@soneryildiz373 Ай бұрын

Hello, I wonder how the clay does not stick when rolling out, what is your secret?

@cybelleqwin 11 күн бұрын

Put a little water on the surface of the clay before rolling it?

@akosi_ame 4 ай бұрын

is air dry clay durable enough for a keychain? I wanna make keychains too but I don't know if it's durable enough. epoxy clay is durable enough but I can't afford to buy a decent amount of epoxy

@DannyDevitoOffical-TrustMeBro 3 ай бұрын

It depends on the clay. If your clay is especially light, it might want to rip apart. I think this can be fixed my mixing a slow drying glue like Elmer’s glue into it when you knead it. If it won’t hold to a key chain fixture, you can glue the key chain post into a hole in the clay, and that should hold it fine. Just make sure to use a strong glue. I would say that most air dry clay types should be fine to make key chains with, as long as the bond to the chain is strong.