FMS PA 18 1300 mm Unbox, Assemble, Fly

[@ARGON023]

THANK YOU, thank you for this RECORDING! VERY VALUABLE comments. VERY WELL AND FACTUALLY EXPLAINED! No rush, no delays, no shouting! Just right! REGARDS. I have a question, can this EPP model be protected or the color changed: with varnish or heat shrink foil?

[@TimMcKay56]

Glad you liked the video! You can cover this model with iron-on covering, just keep a low heat setting. Acrylic paint will work fine as well. Be sure to check the center of gravity for correct location when complete.

[@Friskee62]

If I purchase this cool plane it will be my first in over 60 years. This will be my 'trainer'...

[@TimMcKay56]

You will like it! And one that is also a joy to fly is the Arrows Bigfoot, see my review on this winner.

[@1983dmd]

Great video and review Mr McKay ! Love the pictures of your wife and you in front of your real size aircraft !! I might consider purchasing one !

[@TimMcKay56]

No worries, do use the discount code in the Description at checkout to save a few $$. 😊 Tim

[@gerthlongly]

The we exact video I was looking for.. answered the questions I needed answered.. I liked and subscribed.

[@TimMcKay56]

Thanks for checking in! Tim

[@joetheairbusguy1813]

Thanks for the info.Coincidentally, mine showed up today. I can’t wait to get started.

[@TimMcKay56]

Joe: Congrats! It is a fantastic airplane, a truly an "honest" flyer. You will like this a lot. Tim

[@TheChriswhite77]

I’m so glad you made a review on this aircraft! I have had my eye on it for a long time!

[@TimMcKay56]

Go for it, is a great flying plane! Tim

[@forkdevil83]

I enjoy watching your channel. I liked your thorough review of the FMS Super Cub.

[@TimMcKay56]

Antonio: Thanks so much for checking in! Tim

[@Yankee2003]

Always loved that airplane. Looks like something enjoyable to fly. Thank you for the video.

[@TimMcKay56]

Michael: Any time, thanks! Tim

[@thebunkreport]

I'm loving your original build videos. I'm thinking of building the Lite Ranger 2 for my next plane.

[@TimMcKay56]

BR: All good! Best of luck and thanks for checking in. Tim

[@jhuff8596]

Great video Tim! Cheers!

[@TimMcKay56]

👍🏻😊 Tim

[@rcnovice1066]

Very helpful review. Have just purchased one and so will refer too your video when building. I use the reflex in my other FMS models and have found it pretty easy to set up and helped learning to fly as a novice rc enthusiast. Thanks again for a thorough review.

[@TimMcKay56]

Enjoy this plane. One of my favorite flyers! Tim

[@johneastman1905]

Thank you kindly. Question: if one wanted to refinish in Piper Cub yellow… All carefully masked off to keep moving parts free and the AC windows, Any good recommendations for best tape and importantly paint type. Can the black markings be readily removed, and any prep steps ? Thank you kindly, and pass this on to answer with good experience.

[@TimMcKay56]

John: Apologies, but I know very little on painting RC planes. Tim

[@flyaway319]

I used this vid to build my PNP...thanks!

[@TimMcKay56]

😊👍🏻 Tim

[@planker]

Excellent work on the Video. I'm considering a return to flight. I've been elbows deep in Arduino and needed a radio for a project. So now I have a 10 Chan Flysky radio that is unemployed. Now that's a pretty cool airplane. My return to flight may need an ejection seat.

[@TimMcKay56]

All good! Tim

[@robertgordon5562]

I enjoy your channel! That was a nice review of the PA 18.

[@TimMcKay56]

Robert: Thanks so much for checking in! Tim

[@donclark8673]

Nice video thank you just got one of those yesterday will be flying out on Monday

[@TimMcKay56]

You’ll love it, great flyer. Do use the rudder from time to time, bit of adverse yaw. Tim

[@WATCHMEGOBROKE]

I Have the FMS Super EZ V4 with Floats and i love it! Im considering getting this one too

[@TimMcKay56]

CO: The PA-18 is a neat airplane, you will like it. Tim

[@MammothPaige]

It is a great flyer

[@TimMcKay56]

It is one of my favorites!

[@Tammy-un3ql]

enjoy your channel

[@TimMcKay56]

Many thanks! Tim

[@TrainingTough-h7p]

Hi sir, thanks for a very nice video. I am just getting into this hobby and have been looking into this size airplane. I have never flown any RC planes before but need advice and guidance on a particular plane I can get started with. If you can recommend any planes that would be great. Thank you

[@TimMcKay56]

PV: I think this plane would make a great trainer. Please be sure to find an RC flight instructor! Tim

[@loftbuckleyrc]

I use the AR 637t in some of my planes. Usually not on, but it has saved me from losing a plane or two. I assume the reflex performs a similar function.

[@TimMcKay56]

Most likely. The PA-18 is super easy to fly, though. Tim

[@Elnufo]

It appears to have quite a bit of downthrust. from what i could see, it looks like about 5° or more?

[@TimMcKay56]

Elnufo: I did notice a bit of down and right thrust, but think it is less than 5 degrees. Anyhow, whatever the designers put in works well. Tim

[@LuisMunoz-il8nh]

Beautiful 😊👍💯💯💯💯💯💯💯💯💯💯💯💯💬

[@TimMcKay56]

👍🏻😊 Tim

[@zoridor16]

Hi, friend! I would like to acquire my first FMS brand airplane (but in reality I am very concerned about the compatibility of the electronics, that is to say... the majority of horizon hobby RTF airplanes contain spektrum electronics and many times their models are limited to said electronics... my question is.. is it possible to attach any other esc and receiver like Flysky to the fms planes?

[@TimMcKay56]

I like FMS airplanes a lot. Very thought out and they fly well. Especially the PA-18. The ESCs come built in, usually I never see them as they are buried in the fuselage. You’ll provide your own receiver (I use Spektrum AR620) and most receivers will work with any ESC. Tim

[@dhoffman6435]

Hi. I need to replace the control horn on the main wing of my FMS 1300mm. I can't find an OEM replacement horn to purchase. Can you suggest a specific different control horn that would work on the wing and with the control rod? Thanks.

[@TimMcKay56]

Try www.Amazon.com, search for model plane control horns. Tim

[@rayemigh3776]

I WANT ONE LOL my problem is im canadian and to have it shipped to canada is pricey will look into our hobby shops around london ontario ty for the great video

[@TimMcKay56]

Good luck finding one, it a great little airplane! Tim

[@riazahmadkhan2936]

I have PA 18 , 1700MM. I have flysky i6x and a six channel flysky i6b receiver. Kindly guide me as how to operate thrust reverse plz

[@TimMcKay56]

Here you go: kzbin.info/www/bejne/iaamgaaVlJmChZo

[@MrGaborseres]

👍

[@TimMcKay56]

😁 Tim

[@november5945]

Well now I need to spend money😳

[@TimMcKay56]

You'll have a good time. Do use the discount code in the Description at checkout to save a few $$. 😁 Tim