Gear knob shifter selector remove replacement

[@gregoryharrison4163]

Thanks for good concise and too the point video! Good job! Keep making these good videos! 😊

[@bryleespires8294]

Good info on this video. Thanks for the help!

[@adamabdullah4829]

Hi Mr Francisco, thank you for helpful videos! I have problem when I switch selector high to low I feel its dropping harder than before, sometimes ok but mostly with noise like when you can’t shift , have you ever had fixed that problem

[@sbjennings99]

Awesome informational educational video experience Y'alls

[@triplegcontainersservicesl6372]

Does air leak out of the other holes that don’t have quick connects or hoses connected to them?

[@Bobby_bushay1992]

Thanks for the video buddy 💪🏽

[@Hiim0094]

Gracias primo!

[@ag8499]

Hey what's can be ? I have issue with 13 speed transmission Eaton. 1,2,3,4 gears working well then 5 and rest dosen't work. I feel like air not working properly

[@zaidchalabi1599]

thanks for video man i have a rockwell 10 speed i removed the assembly and got nice chrome with ball knob same as yours A6909 i put the fittings and union to extend the line but for some reason air leaks like its going back from union out in low range and when i put in high range nothing leaks from shifter but i hear a leak somewhere under dash or under truck. not sure why! i only cut the air likes and put them in new shifter which has like 5 holes but im putting fittings in same ones you have in video can anyone help me with this please ?

[@westsidetrucker1449]

Got a question.... Hope u answer it. My 08 Freightliner Cascadia will sometimes stop building at right before 75. And when this happens , the gear selector won't go from high to low. It'll either get stuck on Low gears or High gears. It always starts to work properly after the temperature reaches 125. Sometime I can hear some air leaking from the shift knob and sometimes I can't. And when I'm parked if I lower the selector to low it'll start dropping my secondary air gauge. If I leave the knob up when parked the secondary air will start going up. Any ideas what's wrong? I took it to a mechanic and he said it was the TRANSMISSION COVER. OR TAPADERA DE LA TRANSMISSION. BUT I DOUBT IT. UNA OPINION COMPA? THANK YOU

[@CashNYC]

Great video

[@juanvivar2123]

Cómo quitas esas dos mangueritas How You remove those two little jodes?

[@franciscoamayaYT]

Push and pull

[@hiimwill3086]

Hello Francisco where is your shop? I have a 2012 cascadia with a Detroit dd13 . I live near Fontana William L

[@Alvincito]

What’s the size of the screw on the air line fitting ?? Need answers please 🙏🏻🙏🏻

[@franciscoamayaYT]

3/8 if I am correct.

[@biggdadd35]

How about pause yapping until all air is drained

[@itonysi]

Hi Francisco I enjoyed all vedio's you uploaded here. You are a great man. I have a sharp clunking nose coming trou the gear knob when is cold and goes a way after an hour. Would it be my knob? Thx.

[@franciscoamayaYT]

It is possible.

[@ristestankovski]

I have the same problem. Just bought the part gonna replace it and see what happens

[@ottisdriftwood78]

I can't get my shifter loose

[@ristestankovski]

How much is the part? I just bought mine at a Nashville dealership for $240. Thanks for the video btw.

[@KN-mi7mh]

U paid 240$ for a 25$ part 🤭

[@ristestankovski]

@@KN-mi7mh kaj go najde za $25?

[@KN-mi7mh]

ristestankovski amazon drugar :)

[@ristestankovski]

@@KN-mi7mh online ke go najdes i bes pari ali koga si na pat i ti treba togas ke te ebat u bilo koj dealership

[@vanblue7317]

You didn't show the whole precedure for the air hole

[@nd318865]

Francisco; where might I tap into the DD15's intake for an analog "turbo boost gauge?"

[@franciscoamayaYT]

Do you have the optional dashboard with the multiple gauges or the regular square dashboard.

[@nd318865]

Francisco Amaya I've 10 gauges. None for temps. I added engine, Trans and 2 diff temp gauges but don't see a point to readily tap into the intake tract. I have installed an old school analog boost gauge and wish to use it rather than a digital gauge through the even. Thanks. Jim

[@franciscoamayaYT]

So all the gauges you added are analog gauges? DD15 ENGINE doesn't have extra plugs to add components. But if you have a 2011 and up with DEF, near to the throttle body valve, there is a bracket on the top, there near to the bracket there is a plug, you can remove it and look for a adapter to connect the fitting.

[@nd318865]

Francisco Amaya Is it the fallen head plug in the cast aluminum price just about 5 o'clock from the oil filler cap?

[@nd318865]

fallen head

[@KN-mi7mh]

What size is the locking nut?

[@franciscoamayaYT]

3/4

[@abelpatino43]

Bruh I thought I was connecting the right air holes in the right hole. Lmao that shot got 3 of them on one side n 2 of them on the other side. 😭