Electric Hammer Drill Restoration | Hitachi Hammer Drill

Electric Hammer Drill Restoration Video
This is Hitachi hammer drill that I bought from japan recycle shop 35$. It weighs 4 kilograms. After the restoration It works very well but it's sound is extremely loud with hammer mode.
I hope you find something useful & enjoy from this video!
I am happy to receive your feedbacks, advices, suggestions to improve myself.
!!! I apologize for the mistake if I have made in this restoration !!!
--------------Thank you so much for Likes & Comments--------------

[@nv2019]

外国語難あります…当方日本人です。いつもこの動画にはお世話になりありがとうございます。大変勉強になります。

[@gear_show]

私は日本の電動工具をたくさん修理し、それらからも学びました。

[@toolsconsumables7055]

Dear Sir, Your restoration is nothing shorty of excellent. A thorough disassembling followed by replacement of worn bearings, commutator brushes, etc, etc... The finish is outstanding. Very well done. Kind regards.

[@timehunter9467]

These videos are always amazing to watch. The only thing I would have done differently is not polish the blackened metal parts. The only way these paint finishes would be better is if you could powder coat them, but that stuff isn’t cheap!

[@gordbaker896]

Very nice. A small turntable may help you paint small items. Nameplate is a bit crooked but likely is stretched Aluminium.

[@faarmer]

Oh yes, that paintjob! Finally the missing element, amazing!

[@restyfernandez1877]

Nice work

[@tonyday7233]

Lovely tool, lovely job, very nice.

[@jameshanoomansing1442]

excellent work

[@gear_show]

Thank you!

[@mohamedalli4832]

Good job buddy

[@MrDekiller1]

Smart idea with the tap wrench

[@gentiligiuliano7882]

Which kind of spray paint do you use for your projects? I never had luck with spray cans, I find color not really strong for a tool. Other youtoube channels on tools restoration use a 2 step prcess with a base color and a transparent lacquer, that makes sense, expecially when lacquer is a 2 component one. Original color should have been some kind of enamel (but i guess 2-component enamel) or may be some powder based paint. Can you include brand of products you use for restorations (and eveentually tell how behaves color after some months of use) ? You definetly could take advantage of some cheap chinese ultrasound cleaner, it will make life much easier on small components.

[@crowblunt536]

Good job man

[@gear_show]

Thank you!

[@matiasbravo8189]

Las usas o las dejas guardadas??

[@Cany0many]

Well done.

[@Papa-Kev]

Great job!

[@scroungasworkshop4663]

Great work. I like your videos because they are relaxing to watch and you do really good camera work. You also do a thorough job. 2 questions, how did you know that the black ring behind the chuck was left hand thread? And although I like the bright red, were you tempted to paint it Hitachi green. Well done and cheers, Stuart 🇦🇺

[@Farmall450]

Agreed on left handed

[@kerjahobi2447]

what series of this machine ?

[@박지섭-o6v]

Good

[@robertobezerra8376]

Trabalho lindo parabéns.

[@getyourkicksagain]

Excellent restoration, my friend! A+

[@cauchudark]

ông này VN hả

[@chicox37]

Que hermoso trabajo, una de las mejores restauraciones de KZbin.

[@placidrenegade]

Great job, all electric power tools have to be plastic handled nowadays! But great to see old metal ones.

[@sonnguyenn97]

Great 😁

[@davidronson8712]

By 6:45 I have forgotten where everything goes.

[@rla26368]

So relaxing. These restoration videos are just perfect for my OCD "need for completion" fix.

[@gear_show]

Thank you!

[@christopheranastasioswolff5429]

Your way of engineering mechanisms to take these “old guys” apart intrigues me every time I watch your videos. Keep up the grind!

[@ershadhossain3167]

""জচ৫ড়ড়ড়দগনম

[@HepauDK]

It is quite evident that the original colour was yellow, and it was later painted orange with a rattle can without masking anything off. Why not paint it the original colour?

[@DavidPlass]

What is the tool used at 6:47 to pull out the bearing?

[@br14nn14]

pense que lo pintabas en amarillo que fue su color original, supongo... buena restauracíon, un salu2

[@frankstrawnation]

Yes, yellow was definitively its original color.

[@JAKOB1977]

wicked.. I have heard about this before.. Im pretty sure it's the thing that goes under the phrase "vintage porn" I like it, like it a lot... solid work. +1

[@gear_show]

Oh haha, thank you for like my work.

[@tinosenf6937]

Why not complete orange, like the original?

[@raymondmcgee4491]

I actually like the contrast. Gives it a new identity while still being authentic.

[@АлексейЖуков-х9ы]

I join the question. Why not original color?

[@Samiplayz_12]

glue gun Restoration

[@Tyler-ub2bu]

*drill* "am i a joke to you?!"

[@mantaship]

1,000 LIKES! I love, love, LOVE when the Jacob's chuck isn't replaced, but cleaned and especially polished. Your Jacob's chuck is almost chrome now and looks like ROM the Space Knight would carry it. Well done. Beautiful restoration.

[@firebladex8586]

they managed to get paint on the commutator!

[@ToyotaStarletP7]

Really nice! Except the silver paint... Just cleaning and sanding the silver parts would be better , maybe polishing...

[@nnokwannokwa3074]

you mean the silver paint is not good in your eyes or in his own eyes?why not you upload your own video,enemy of progress like you

[@ToyotaStarletP7]

@@nnokwannokwa3074 calm down, I said really nice. You can call it viewer interaction or feedback. Maybe my comment enables progress in his eyes... Nobody knows.

[@IR-nq4qv]

It appears that this wasn't the first time this drill was worked on however it is the best time it was ever worked on, go job, very thorough. Keep up the good work, it makes us all want to succeed and do our best in what we do

[@gear_show]

Thank you for the motivation works.

[@Bk99JzM]

Witam i pozdrawiam!!Swietna renowacja wiertarki Hitachi!!Mistrzowski remont.dokladnosc i rzetelnosc daje dobre efekty!!Dobry pokaz filmowy!!Tak trzymac!!

[@justinecooper9575]

Nice job. The only thing I would change, and this is merely my personal preference, would be to buff or sand the paint off the Hitachi name. Or maybe paint it a contrasting color.

[@gear_show]

Oh thank you for the great idea.

[@MultiSupertux]

We need more videos about your restoration👍👍👍👍👍👍👍👍👍

[@gear_show]

Yes thank you so much for value my works.

[@shanupandey7673]

Shanu pandey

[@tomalcolm]

Now I want to retire in Japan and fix tools from the recycle shop.

[@PescaDeNacho]

Muy buen video y restauracion saludos desde argentina!😀

[@gear_show]

Thank you!

[@stachycatabas873]

VISE & BENCH GRINDER LATER 2:30 PM ONLY HARE AT GEAR SHOW YEAR ON

[@xerejuneseve6333]

Great job,it is always nice to watch and learn something.

[@洪小憲-w5g]

あなたの塗料と研磨技術はフィルムに非常に優れています、私はあなたにメーターを正確に修理するためのフィルムがあることを願っています、ありがとう ^^

[@SirChevy]

Looks good, but you really need to pack those bearings with grease BEFORE installing them. Putting grease on the bearings as you did around 15:05 doesn't get the grease onto the balls and races, which is where it's needed.

[@zoltizolti3165]

What is gud old models hammer drill werry strong constructions??? -Hitachi -metabo -hilti or usa and soviet model?

[@andrecosta4537]

Great job! You achieve impressive results.

[@gear_show]

Thank you!

[@derekwilkinson7939]

An excellent thorough restoration. I just don’t understand the thumbs down.

[@keithjames9654]

Shinnied up the outside of the Chuck real nice - What about the rusty old INSIDE ???

[@Tyler-ub2bu]

Ooooooo Good point 😉

[@totokythuat3700]

Tot viet nam

[@jakevalent6180]

Can you link me to that bearing puller tool you always use? Id really like to have one

[@rzerizrz]

Nikata Bearing separator kit-10pc

[@КошмарКошмар-й2б]

Very good restoration drill 👍👍👍👍and video cool 👏👏👏👏

[@gear_show]

Thank you!

[@sharonrobinson7992]

very Loud Hammer Drill Buzz Buzz Buzzzz Buzzing noise whirrrrrr whirrrr whirrrr whirrrr whirrrrrrrrr

[@alejandrom.r3402]

Con lo lindo que quedó no dan ganas de usarlo para trabajar XD

[@teppaha]

hell.. i work over 10 year in construction area and never heard that hitachi was red. what year is it? last historical tool i'd hold in my arms was in august. it was working and still in good shape. black hammer drill with detachable cord, labeled "Atlas Copco PDE 13 RQ" , it had CE and (lol?) PCT russian standard. made in germany. You know who is manufacturer....=)

[@Road_Rash]

Pretty sure someone painted it that color before he got it. The original color was most likely yellow.

[@Tyler-ub2bu]

@@Road_Rash no green not yellow

[@dheerajniveshkulla6520]

Sir please give the link to buy your chisel set....please sir

[@veryrealrealreal]

hm yes today i will add a tactical grip to a hammer drill

[@stachycatabas873]

Grinder and hand pump 3:30 pm

[@Tyler-ub2bu]

Huh?

[@Fridelain]

What grit of sandpaper on the primer?

[@trabantfreak2370]

Why did people in the past feel the need to slob paint all over thier hand tools. Without stripping them apart first.

[@emaybietobungi7879]

Modifed DC12V and BATTERY

[@reidamontanha9367]

Meu sonho saber fazer o que VC faz.gosto muito de mecher nas coisa pra conserta ,mais n consigo,parabéns

[@LamazMaty]

Great job, nice video. 👍

[@baopham-qs5zw]

Tôi mới 14 tuổi tôi rất thích xem những cái này

[@yeagerxp]

Well done.👍👍👍

[@ikm64]

What an enjoyable watch...a skilled craftsman... making it all look so easy. Somehow I'm sure I'd have ended up with a lot more parts than I started out with.....Respect!

[@marquelcherry9075]

Whirrr,whirrr,Whirrrrr,drill noise buzz buzz buzz

[@robocop6666666]

What great job love this channel can I ask . What do you do with the tools once you have fixed them ? Keep or sell🇬🇧

[@gear_show]

Now I still keep. Thank you!

[@stalkson]

I really like to watch your videos, great work, perfect restoration, appreciate your hard work.

[@LieLo416]

now you gotta hunt down the idiot who first spray painted the tool orange and beat him up for getting paint into the commutator bars, motor windings and on the carbon brushes.

[@blacksmith9451]

That is really good work! Awesome machine

[@Reaper-3000]

Oh god here we go with the crimp vs solder experts

[@jamesbond9873]

Solder!

[@ytxstream]

definitely crimping

[@AwesomeVids2024]

Solder, then crimping!

[@getyourkicksagain]

Crimp, then solder, then heat shrink tubing!

[@dschon7]

What is that material called you used at 5:28 a piece of it broke on a panel hoist i cant find it cuz idk what its called

[@electronixTech]

It's always a pleasure watching you complete another quality restoration.

[@samsingh2042]

Back in the days that was a drill to have, looks like an 1980s model

[@stachycatabas873]

Like tysy tube restoration

[@koshimazaki847]

Good job man!!!!

[@yatzecyatzec]

finesse and perfectionism

[@marekj.c8289]

Very well done!

[@Asault964]

Min: 12:00 i think you have to restorate your own stood drill

[@gear_show]

Thank you for the suggestion, I will do it next time.

[@rsyt3113]

9:50 Please can you tell me what the white powder you use is

[@coreysheets4862]

It may be loud but it looks good doin it. Awesome job.

[@carlosalexandregoncalves1255]

Forte este equipamento. Show de bola seu serviço. Hitachi é bruta.

[@danielcastillo1140]

please stop use silver paint, that look bad....

[@nathanturner3616]

That jacobs chuck looks incredible!

[@halfmoa]

Did you just switch the neutral?

[@xl000]

do you know what A means in AC ?

[@azevedodaniel4467]

Bravo pour cette belle vidéo et pour le travail que tu réalise ça fait depuis 1 ans que je regarde toutes tes vidéos et je les trouve excellente et j'adore les vidéos que tu fais encore un grand bravo

[@ikizkardesler7927]

güzeldi

[@darknessascending2048]

I'm going say that the red is the wrong color,not saying its suppose to be green but def not red.yellow maybe since it was in the casing.normally vintange Hitachi is all metal no paint

[@gentiligiuliano7882]

I also guess original color was yellow as it was the color under the label. But orange-red is fine

[@hamidrezasadeghi9267]

great and clean job agin

[@gear_show]

Thank you!

[@shaeldagah]

Since when hitachi was red 🤔🤔🤨

[@themrenerd7384]

Yeah, you can clearly see in the video that the original paint was yellow

[@PVZBlover]

It Bugs Me That He Made A Hitachi Look Like A Black And Decker

[@abdulwahid8579]

Excellent job 👏

[@joe1569]

Excellent again

[@christastic100]

Really enjoyed watching this excellent job

[@gear_show]

Thank you!

[@RenovGamer]

what s this object at 12:48?

[@-slemantech6136]

Great👍👍

[@gear_show]

Thanks 😃

[@superbaby3036]

Hitachi Milwaukee 😅

[@PVZBlover]

Super baby Or Maybe Hitachi And Hilti

[@ryo1beretta.151]

Jf3