Simple Way to Turn a Vintage to Modern Flashlights | FUJI Novel H 147P

[@Nami-vq4jr]

日本の素敵なものをよみがえらせてくれてありがとう

[@zik316]

That comparison at the end was worth the wait. Thank you for the videos. It always brightens my day when I get notified of a new one.

[@JayDeeIsMyName]

I'm glad be always shines a light on this kind of handy equipment.

[@simonruszczak5563]

Gave me a flashback to 20 years ago. Fitting a gel lead acid battery and charging socket. Lovely soldering.

[@dangligor2745]

Long ago have one gel pb battery flashlight. You need to keep it charget all the time when you not used and not discharget to blank, because the life of battery become short. After you used till full discharged need to recharge it in very short time because if you do not, start forming cristals of sulfuricPb who reduce capacity and after some time short circuit elements, battery become uselles. LiIon battery is more versatile, more recharging cicles and can survive to empty dry, more than pb battery. You need a flash Light dependable, for long usage and easy to maintain.

[@luismsanchez442]

Wow !!! What a difference between the new and the old.

[@THX..1138]

Nice! But one problem you may have is overheating....I converted some old Ryobi one 18v flashlights with incandescent bulbs to use 12V MR16 LED Tract light bulbs. The bulb are designed to operate between 12 and 24v so work well with up the 21 volts you get out of 18v lithium tool batteries. However being sealed up in the flashlight the bulb did burnout after 45 minutes of continuous use and I had to drill some ventilation holes in the housing to a void ruining another bulb. Vent hole would unwaterproof your light. So you may want to just avoid running the light continuously for long periods.

[@gear_show]

Okay, I appreciate with your information :)

[@DinnerForkTongue]

Yea, if you want your LEDs to burn bright, you *_NEED_* heatsinking. No two ways around it.

[@jurivlk5433]

@@DinnerForkTongue The reflector has some beefy heatsinks!

[@thepenultimateninja5797]

​@@jurivlk5433 The heatsinks can't do their job if there is nowhere for the heat to go. They need air circulation.

[@raihangibranbejoselawase5492]

Kreatifitas tanpa batas.... Lebih mudah dan murah beli baru

[@electricalinfohub1543]

Amazing restore

[@miguelare3]

Damn now thats what I call an upgrade!

[@gear_show]

Thank you :D

[@reahs4815]

You can buy an even better flashlight for the same money but okay

[@PureRushXevus]

Wow, those comparisons outside really shows the difference. Well done

[@gear_show]

Yes, I really like the new one. Thank you!

[@poukenkhiuboupamai6885]

Wow! Water resistant too.. good work again

[@sharptoothtrex4486]

Everything vintage to modern tech is a great one.

[@adriansuhr]

The heat from the leds dissipation will reach those batteries, better thermal isolation between the batteries and heat sink will make last longer.

[@farrelrivandi170]

better use it underwater

[@xman530]

Reminiscent of childhood days😍🥰

[@joewalsh1054]

When you were a small fart child?

[@xman530]

@@joewalsh1054 When I was 8/9 years old😆

[@amilcarmoncada1801]

Amigo estupenda manera simple, de convertir esta linterna FUJI Novela H 147P vintage en una moderna, mis respetos y saludos desde Venezuela 💯💯👍👊🤘

[@ForgottenShineRestoration]

Very good job! I like the result!

[@gear_show]

Thank you!

[@LAVINCHO1]

Impecable video, gracias por compartir sus conocimientos y manualidad en el trabajo, saludos desde Uruguay.

[@nathantaylor9998]

Very talented. Here in America we seem to have the "throw away mentality." Good job! 😁

[@gear_show]

Thank you so much! I hope they saw this video.

[@troyna77]

Gear show has saved many old tools and given them a second chance. We need more of this in America.

[@tristansimonin1376]

Same in France we you look at trash bin there is so much things who worked well but it's old so people throw it

[@kdzenins]

Not always that mentality is bad, he says that he spent 20$, I don't think you can buy 6 lithium battery's for 1$ a piece, maybe used. Also I think that the prices are without shipping. He put some time in making this as well. For the price you can get a similar flash light from china without the effort of waiting for each part to be shipped. Videos like this are for learning and entertainment.

[@georgel3657]

Probably not the worst thing America has going for it tbh

[@عبدالرحيمأومرغاد]

Good job and great innovation

[@javilarg]

Incredible transformation 👏🏻👏🏻👏🏻

[@gear_show]

Glad you think so!

[@yuusasa4283]

鈴木さんのサムネイルで来ました 懐かしい形の懐中電灯だね

[@yuzuanpapa0712]

すげー！しかも防水

[@HarunTAKIL]

super workmanship

[@komattaa]

0:12 The name of the former owner is "鈴木" (Suzuki).

[@josepalacid]

😂😂

[@TheMijman]

Huh. You're right.

[@Im_The_Slep]

Vtec vtec vtec

[@danieljunior2382]

Man I just love how you turn those tools into cordless.. Very cool. Keep it up. Cheers from Brazil

[@gear_show]

Thank you very much!

[@SupremeRepairs]

ಅದ್ಭುತವಾದ ಸುಂದರವಾದ ಕೆಲಸ 👌🙏 Great job sir ❤️🙏

[@Raking222]

Sure , run it non stop for a while and see the heat sink melting the plastic. Thumb up for making the video 👍

[@frk380]

Well made👍

[@gear_show]

Thank you!

[@Paulie1232]

Great job, keep them coming, I'm hooked.....

[@gear_show]

Glad you like them!

[@jeffscomp]

Awesome light 👍🏻

[@gear_show]

It really is!

[@mucahitekdag]

We are watching fondly Greetings from Turkey

[@gear_show]

Yes, thank you very much!

[@TheGingerBone]

Hello,great restoration! please an information: I would attempt a similar projects myself, but can't find led projector/motorcycle headlight. Could you please link me the ones you use in this and other similar projects (the hilti lights for example)? Thanks a lot for the help! You're good, keep going!

[@Zentron]

Nice 'n' bright, now that's what I like!

[@nevillepassarrelli4587]

Nice to see something different in this vid, keep up the good work .

[@gear_show]

Thanks, will do!

[@steveforbes6303]

Very illuminating video

[@gear_show]

Thank you :)

[@KHOAIHOANG81]

Very Good...!!!

[@MrDastardly]

Amazing restoration Sensei. 👍

[@gear_show]

Thank you very much!

[@renaissance3605]

Very nice 👍 work 👍

[@gear_show]

Thank you so much 😀

[@steve210sa]

Amazing job and very professionally done 👍👍👍

[@dixonqwerty]

Great job! Very nice conversion of that lamp!! Looks really good.

[@gear_show]

Thank you! Glad you like it!

[@dangligor2745]

@@gear_show Good work! You consider some impruvements? On the edge you have some leds you can use for signaling. You put 2 leds bicolor and add a simple voltmeter to show status of battery for one led and status of charging for another one. This is handy when you charge the flashlight from another source, say car lighter or solar panell. Status of battery is handy when Main power is off and need to use for days.

[@michaelfischer6984]

Just think how bright a Large Fart Child LED would be!

[@SOOONJE]

Amazing!!!!!! I'm in love with your works believe me,I wish I was your neighbor and your friend-I would bring a cooler full of beer with roast beef And a few more delicious things for both of us,And enjoy seeing the best show in town,I'm thrilled every time I watch your videos.God blessed you and thank you for sharing us.

[@gear_show]

Wow, I'm so happy to see your comment. Thank you very very much :)

[@JayDeeIsMyName]

This actually looks like a restoration I'd love to do myself. Greetings from the Netherlands.

[@E-hab]

Thanks for the information in the description and also for the video.

[@gear_show]

You're welcome, Glad you like them. Thank you for visiting my video again :)

[@BigDaddyGAO]

The LED flashlights are leaps and bound better than the traditional lights. I wonder if the heat management of the upgrade will be an issue for prolonged use?

[@Khalid81751]

Good job 👏🏾 I love your channel

[@nsbhagwat]

Nice video. Can you please share links in description from where parts can be purchased?

[@ridhadababi5858]

Good job.

[@GateKommand]

What a good idea - thanks for the video mate!

[@georgel3657]

I enjoyed this very much. Thank you

[@gear_show]

You're very welcome

[@eirerocks]

Great job on salvaging this retro torch. Any idea how many minutes usage you would get from that full charge?

[@jackzondacattv7322]

Fanyfh

[@prasadvn524]

Lovely job

[@gear_show]

Thank you! 😊

[@PataPoufFrance]

Excellent !

[@gear_show]

Many thanks!

[@Eight-Bytes]

What kind of solder did you use? Excellent restoration by the way!

[@jahmierre3323]

Wow that's a waterproof Like cute

[@gear_show]

Yes, it is.

[@jessearrazola4283]

Nice job bro! Keep uploading videos!

[@gear_show]

Thanks! Will do!

[@majong_da]

Why you don't using Power delivery 12/21v type c port for charging? It's more useful and future proofed. Think about that. Btw - good work, as usual.

[@E-hab]

Then it will costs more I think, better keep it simple and affordable.

[@majong_da]

@@E-hab it's costs 1$ for one of trigger. ¯\_( ͡° ͜ʖ ͡°)_/¯

[@belarus4790]

8:22 li-ion chaegeer? Lol

[@hughmungus1072]

Probably the same company that makes the "Small Fart Child" led 8:55 😂

[@belarus4790]

@@hughmungus1072 Chinese English)))

[@SteifWood]

@@belarus4790 = Chinlish

[@vataslab9700]

XD

[@kushalbhaskar4401]

😂😂😂😂😀😀....❤️❤️❤️❤️❤️...

[@thebobis100]

Thank you, lots of good information and a great job!

[@gear_show]

Glad it was helpful!

[@LL-vw4kq]

Oh man im great fan of your work...

[@andrewcosten]

Nice video ....this sort of stuff i am really into

[@Skupik1]

„Small fart child” LED brand. xD

[@jasonsummit1885]

I thought he was going to pull out a weird little toy kinda like how Kiwami Japan does on his channel😂

[@rimmersbryggeri]

I so whish Big Clive sees this.

[@nullvoid564]

A brand you can trust! move over Samsung, Sony, Fujitsu Siemens etc

[@poojakhurasne2054]

@@rimmersbryggeri Y

[@ممۂيزأنۂا]

ض

[@КошмарКошмар-й2б]

Good job 👍 💥👍✌🏻🇷🇺

[@gear_show]

Thank you!

[@frankortiz_HeroDad]

A masterpiece!👍

[@BS-fh9qp]

Неплохо! Молодец мужик! И мотоциклетная фара так удачно подошла!

[@victorcristo8687]

Nice work!

[@gear_show]

Thanks for the visit

[@crazyivan030983]

Very cool :) greetings from Poland :)

[@Mikey-Likes-I.T]

maybe add links to the parts as well that actually looks like something I can use

[@pannalalvarshney2958]

W, Nip ,aq

[@damonreynolds6775]

Next, 'simple way to convert your car into a star wars land speeder'

[@robot25530]

😂😂👍

[@someguyontheinternet-]

Wait, do you mean to tell me that there's a simple way?

[@Jim-lv6jc]

I would love to see that

[@arisnugr0403]

Marvelous...

[@gear_show]

Thank you very much!

[@gordonfreeman320]

I really love your portable battery fume extractor fan. Would be nice to have!

[@gear_show]

Oh, that is very simple to build, Glad you like it.

[@rocharox]

Tripod Fan won it for me.

[@gear_show]

It is so simple to build it.

[@Kamidashi77]

Светодиоды - сила!

[@Dmitrytln]

Только с хорошим драйвером и достаточным охлаждением. Если драйвер выдаёт завышенный ток или радиатор пластиковый, то светодиоды за пару дней превращаются в какашку.

[@ЮрийЗахаревский-ц9д]

Cree XHP70.2 один будет в 1,5 раз мощнее, чем эти все вместе

[@alpinaobjektservicegmbh7795]

Good work

[@Александр-ххх-з3з]

Отличная работа!!! Лайк

[@gear_show]

Спасибо огромное!

[@AlessandroCussino]

In mine i only want to change the classic light bulb with a 6v led one.

[@rajupavhane8304]

Nice touch

[@danielkofman4592]

Very impressive

[@gear_show]

Thank you!

[@RestoredChannel]

Nice conversion 👌

[@SalehalOreef]

amazing work 👌🏻.

[@gear_show]

Thanks a lot 😊

[@jyotishman.97]

Hello brother nice video 👍

[@elvaledorcarnal]

very good your video,greetings from Mexico city amigo !!!! 👌👍✌

[@gear_show]

Wow, I'm so glad that this video popup in Mexico city :D

[@justinskywalker]

Where does one find a "small fart child" led bulb?

[@E-hab]

It's after market motorcycle head lamp.

[@StefanDembowski]

It did make me wonder!🤣

[@frankfarklesberry]

Sourcing the said small farting child bulb has proven to be difficult. Anyone have an Amazon link?

[@beandrive]

@@where_is_pavel Yeah, that was "helpful", if you don't know, why answer? just say'n.

[@c4n15lupu5]

@@beandrive hahahaha

[@igsbs9075]

Nice!

[@e28forever30]

Good job! I enjoyed your video, very interesting.👍

[@gear_show]

Thank you very much!

[@FerSniper]

Очень интересно!!! Хотелось бы по больше таких контентов!!!

[@gear_show]

Спасибо большое, сделаю.

[@pianoplayer9203]

Great Idea . Thank you

[@Dmitrytln]

Super 5+++++ Old light bulb consumptions 0,5A on voltage 4,5V which means that filament resistance is 9 Ohms. If we apply 6 volts to 9-ohm filament, it's current will increase to 0,65A and wattage is 4 watts. Light bulb with overlimited current will shine brighter with lower lifetime. Automobile lamps Osram Nightbreaker and Philips Racingvision are working with overlimited current like this flashlight before remodeling.

[@gear_show]

I appreciate your information.

[@jamestr9350]

1. you use mousse which is easy to burn. 2. you don't do hot air holes in/out for cooling.

[@locvo1301]

Can I use a pc fan for cooling instead of drilling holes, does it have any different? I want my light to be waterproof.

[@johncarter9396]

Fantastic video as I have an old torch like that, if you have a link or shop name to get the led light that would be fantastic. Do you have a video for the soldering fan please? Please keep making these videos and just ignore the silly comments.

[@conanhuynh3413]

Would love to know how to build that fume extractor! Excellent work as always.

[@gear_show]

Great suggestion! thank you!

[@wilcoxtactical3716]

Cheers to all the Smart Fart Childs out there. Wherever you may be.

[@hopeofmukil2244]

Super I like this channal very much

[@gear_show]

Thank you so much 😀

[@jankociubinski5423]

They are probably ready for the price.

[@مهندس_علي]

Thank you so much...

[@gear_show]

You're most welcome

[@مهندس_علي]

@@gear_show i Work it in home..

[@zoltannagy3211]

This well done 👌👌👌

[@MuhammadDaudkhanTV100]

Great

[@hrxy1]

Excellent vid thanks

[@rks3488]

How to make that exaust fan...? Please teach us 🙏🏻🙏🏻

[@klenny88]

Any issues with overheating with no airflow to heatsink? Amazing upgrade nonetheless!

[@gear_show]

I am not yet test it for longtime turn on, but it will tell in future. thank you!

[@locvo1301]

@@gear_show So... Have you tested it yet? I also got the same question.

[@locvo1301]

@@gear_show Can I use a pc fan for cooling instead of drilling the holes for airflow? Does it have any different? Please answer, I need your help.

[@almasilva7322]

Hola me encantan tus videos saludos

[@gear_show]

Me alegra que te guste este video.

[@gear_show]

Me alegra que te guste este video.