Geberit Shower Tray - Installation

Vidéo de montage 3D de l'innovation Install Block®. Le concept est simple: réutilisez les coins de protection de votre receveur Renova pour votre installation. Les coins assemblés 2 à 2 constituent des supports facilitant la manipulation et l'installation des receveurs céramique par une seule personne. Réglables en hauteur de 100 à 160 mm selon l'espace nécessaire aux canalisations, ils permettent de caler le receveur sans effort.
If you need technical support, please contact the local technical support team.
Please note: Videos do not replace installation manuals. For installation purposes, please use the respective Geberit installation manuals.
For more information about Geberit visit www.geberit.com
Imprint: www.geberit.com...
Disclaimer: www.geberit.com...

[@marcodeluca4068]

Useless how can you put skirt and secured to walls?

[@NotEvenDeathCanSaveU]

You cant put any skirts to that, unless you dont have the tiling there yet or w/e you call it. In this kind of installation, you just have to make sure you use a high quality silicone, not some cheap garbage and then inspect it regularly and fix it if needed to avoid any leaks. The issue I have with this system however is how its not really secured in place, as you kinda mentioned. I would personally make sure the floor is completely level, if not then fix it, then use the low-weight concrete bricks (those things with pores in it, like Ytong brand for example) as a base, either the 10, 12.5, or 15cm ones (4,5,6 inch) glue it to the floor with appropriate mortar glue, then put the same glue on top of those bricks and install the shower tray.. That way it properly sticks to those bricks which are glued to the floor making the whole thing a lot more stable, its way better than most of these "feet" mounting systems most companies produce.

[@dilligaf2386]

No centre support emmmmm🤓

[@khalidalshadid9070]

👍👍👍

[@SanuzloffRu]

Отличное решение

[@GeberitGroup]

🙏