Gen 2 Premium FCU Overview - What the Tech!

[@dudearlo]

“You got that spartan fcu?” “Nah bro..., my shit is premium 😎” Yall sellin them wolverine airsoft beer glasses? :D

[@srewolfairsoft1683]

So when I purchase the Gen 2 fcu do I need anything else to program my Wolverine mtw with a reaper gen 2???

[@NathanRoss-g6e]

So I have the forged mtw with the premium fcu. I put the wraith X in it have never had good luck with the 12g cart. so I switched to the 9oz tank. Seemed to work fine. Played about 2-3months ago no issues. After play I had the tank filled and left it attached. Went to play Friday night and the tank was empty. They went to fill it and it was leaking so bad. Employee said go talk to the owner and he told me it was the wraith x and I should change it back because “they suck and you will never get a good seal”. So… I proceeded to take it apart and put back to original (btw it the engine/nozzle that’s leaking and I still can’t figure that out either, took it apart and cleaned it out, regreased lightly and still sticking out/open. It will not retract), but I digress slightly. While trying to switch it back the cables coming out the trigger side totally came right out of the pigtail. All five at once. I have tried to make sure they are in the correct order (assuming it’s the same as on the fcu unit? Top green, yellow, red, brown and black on bottom) This thing will not register to fire. Has fresh battery (even tried the new back up), fcu will turn on and allow me to program, and I think everything looked correct. Any ideas??? I do remember us trying to fire it at the field while putting air to the tank and it didn’t fire then either. Not sure what to do.

[@NathanRoss-g6e]

I do have a pic of both ends (pigtails) and they are not the same plastic piece. The switch side doesn’t seem to have a backing that is the same as the fcu side.

[@bermias1234]

omg dinos board

[@anthonycarpenter6736]

I have a mtw9 do I need this??

[@siw3y99]

Would it work with m249?