Hi, in this DIY video i make a simple inventions and ideas for your home. Thanks for watching. Subscribe to mr. Inventor on youtube
Пікірлер: 346
@9sec93lx2 жыл бұрын
I once made a Spinner fishing lure out of a Silver Mercury Dime.
@saspredydious9295 Жыл бұрын
Oh my goodness! I’m gobsmacked by some of these ideas! These will give me back some of my independence! I’m a 70yo woman! Always been independant and “handy” but in recent years I’ve been unable to do many things I used to do with ease! I’ve severe osteoarthritis! Thank you so much! 🙏
@BlastedMaster2 жыл бұрын
My grandfather taught me the bar soap on wood screw threads as a thread lock when I was 7-8 years old. 30 years later I still use it here and there during house, deck, fence, and shed repairs. Best trick for exterior because temperature fluctuations causes softer woods, like pine/cedar etc., to expand and contract.
@denisecariocadagema2864 Жыл бұрын
Também aprendi isso com o meu avô.
@kovrcek Жыл бұрын
The bar soap is there for lubrication, I use it as well sometimes. I'm not very convinced it can be used as a thread lock, it's just a soap, not very hard but hey anything is possible
@sp160 Жыл бұрын
Também aprendi com meu padrinho marceneiro que isto serve para apodrecer o parafuso caso seja feito de ferro.
@roddevelles4565 Жыл бұрын
No use no but VCU
@Scooot1972 Жыл бұрын
@old ogre that's what I use. Tee lights. A lot cheaper than soap and softer and easier to use plus you don't need to cover the whole screw, once a bit lubricates the first part of the hole you're good to go.
@MaryAnnNytowl2 жыл бұрын
A few handy ideas here that aren't just repeats of repeats of repeats from a hundred other channels!
@pyrosmoak532 жыл бұрын
Yeah I hate seeing repeats. Especially when it's vids from the same channel, or in the same vid like one I saw last night.
@510Redneck2 жыл бұрын
What I found impressive is this mans paperclip and rubber band collection must be pretty immense.
@trappedinroom1014 Жыл бұрын
Don’t forget all the bulldog clips! 😁
@commercialconcepts2198 Жыл бұрын
The right angle pencil is good too, might I recommend adding baking soda to the super glue 👍🏼 strengthens the bond
@phenomanII2 жыл бұрын
This is probably the first video with a title like this where I can at least see why someone would need these ideas. I will probably even end up using some of them! Of course it's not anything groundbreaking, but it reminds you to think outside the box. Everyone in the world has something else laying around, so when we need a quick "invention", we craft it out of that. But you might not think of other uses for things you never use, and thus, never buy. Now, time for me to go buy a few more clamps. One can never have too many of them.
@TheRealFaceyNeck2 жыл бұрын
Thanks for your comment, dude! I didn't want to sit through like half this 12-min video and then decide it wasn't worth my time. Fake DIY videos are the current plague of KZbin and all that. Thanks again. Much appreciated.
@phenomanII2 жыл бұрын
@@TheRealFaceyNeck Honestly, I only clicked on it because I thought: "Oh come on, what could you possibly make out of a cut up spoon?" I tend to ignore DIY videos like this after seeing someone "solder" with a bit of wire glued to a lighter. But I have to admit, this one is actually kind of useful. It certainly gets the creative juices flowing.
@luisrojaslorca42772 жыл бұрын
A
@elizeduplessis78782 жыл бұрын
Thank you so much for awesome ideas. Fresh ideas!! Make work easy.
@AuditorsUnited2 жыл бұрын
you cut up a $50 spoon and make $1 lure ..awesome hack
@henriquejoaquim38122 жыл бұрын
Boas ideias que nem toda a gente tem parabéns mister inventor
@josemanueltorocastro2120 Жыл бұрын
Eres un genio como muchos soy un seguidor de KZbin y es impresionante ver tantas ideas y gracias a Uds he logrado rescatar algo muy personal ser más humilde en la vida y Uds me enseñan a no creerme superior gracias por tus habilidades que Dios te ha dado en tu mente y manos y por compartir tus grandes ideas que Dios te de humildad y sencillez en tus futuros proyectos agradezco de poder formar parte de esta gran familia que es KZbin
@KobusBreed2 жыл бұрын
I've used a VW Polo car jack exactly the same way (about two years ago) to disasemble pallets to build pallet coffee tables. But you can damage the jack.
@marilzedossantosbrito56662 жыл бұрын
Quel bonheur, pas de musique repetitive et énervante au fond.🙂
@alejandromartre47372 жыл бұрын
Muchas gracias por compartir tus conocimientos. Excelentes aportaciones 😃👍
@davidnieve64442 жыл бұрын
I do not say this lightly, " I am impressed!" Thank you!
@gurlalsingh69362 жыл бұрын
3D
@iginiocostantinomanias50052 жыл бұрын
@@gurlalsingh6936 wsaldatore a gas
@ribamarguedes85112 жыл бұрын
Vc são gênio adoro suas aulas gotaria de apreender muitos com sãs ablidades
@crazyDIYguy2 жыл бұрын
Nothing more satisfying then making your own
@jaircanola92042 жыл бұрын
Sencillamente increíble mucho ingenio ,,,👍👍👍
@BryanBarcelo2 жыл бұрын
I don't watch these type of videos for a single solution to a single problem on a single day, instead, I watch these type of videos because they teach me how to think outside of the box, so that I can solve a multitude of problems throughout a life time when they arise. kind of like the quote "give a man a fish and you feed him for a day, teach a man to fish and he can feed himself for a lifetime".
@agusfraga79032 жыл бұрын
0
@user-tc1ui8hy5h2 жыл бұрын
ОТЛИЧНО СКАЗАНО!!
@francisoconnelljr.4790 Жыл бұрын
Is that a real silver spoon at the beginning?
@ginafarducci160011 ай бұрын
2:1 Spinning a can will not mix the paint. 2:55 Why ruin the pencil? Just hold it under the board. 3:59 The ragged cut is on the up-stroke. The clean cut is on the down-stroke, with or without the tape.
@prabhakarkmv41352 жыл бұрын
... but u need a lot of tools to do all this kind of work! And sometimes u need to create your own tools according to your creative needs as they may not be readily available in market! Well, I too belong to that tribe! 💕
@beblissnow5947 Жыл бұрын
THANK YOU for actually showing how you did the picture. & right away. Genius ideas & SO organized. Nice music. Non of the crappy chatter. The saw angle. Lol great !
@denverjnpierre7901 Жыл бұрын
if some people only knew. These ideas can go along way.
@silentp9933 Жыл бұрын
Just when I thought the 90 degree super-pencil was a game-changer, along comes the pinnacle of genius; The pounding of a stubborn nail flat into the board because you can’t seem to pull it out after a couple of attempts. It always seems so easy yet that’s the brilliance of this technique. Quite astonishing.
@brummbaer502 жыл бұрын
Hammer !!!! Du hast eine Aufreihung verdammt guter und nützlicher Tips aufgezeigt !!! Danke für das sagenhafte Video !!!
@bobjimenez44642 жыл бұрын
awesome trick picking up screws with the shop vac. : )
@evenberg84992 жыл бұрын
It also works with Lego bricks. 👍
@ezl80022 жыл бұрын
A lot of this shows the use of "common sense" in solving problems and coming up with solutions! 😁 A real good video.
@hallur75232 жыл бұрын
Those are some quality tools you got there huh 😅
@johnyannacci441311 ай бұрын
I have an issue with using the drill to mix the spray paint can. Centrifugal force would move the mixing ball and the paint to one side of the can and just spun it around. Nothing will get mixed.
@phelinephrenzy2358 Жыл бұрын
You should have a TV show... MacGyver 2.0!! Great ideas.
@xXjoehotXx2 жыл бұрын
a few new ideas for me and usable ones ... good
@farontyronecoxjr2 жыл бұрын
Loves using that bar clamp damn... I wonder if he knows what it was actually made for 🤷🏻♂️
@Mocking692 жыл бұрын
電気コードの結ぶやつに秀樹感激Goodです=3
@franciscodaschagasdacruzfe23182 жыл бұрын
Boa noite, gostei da sua idéia.
@frogz Жыл бұрын
Wow you turned yellow paint white with the mixer.... Random object that fits in a drill
@fascio73642 жыл бұрын
La prova della discesa sull ondulina di eternit...top!!
@99Racker2 жыл бұрын
invaders. I suggest using a power drill on the jack to open the pallets...faster. Thanks for the video.
@user-ic9jk7pw6h2 жыл бұрын
Такие блесна мы делали в70-80 г. Отлично выходило.
@user-yn4bk5pl6g2 жыл бұрын
А ложку обязательно портить.Мы делали из куска нержавейки.
@tonyholt902 жыл бұрын
That was some really useful information thanks for sharing, much appreciated 👍
@craigb822810 ай бұрын
Some ideas need a little more testing.
@tonyholt9010 ай бұрын
@@craigb8228 yeah you probably got a point 👍
@guillerios3734 Жыл бұрын
Excelente s,, IDEAS!!! Mil gracias!!!
@TPS0702 жыл бұрын
Granted, these ideas are unique, and admittedly, pretty clever and cool...but none the less, completely impractical for us every day working Joe's, we just grab a hammer and start swinging, or pick up a sheet of ply wood and pack it wherever we need to go with it, honestly we just wouldn't really have the time to do all of that just in order to make it easier, alot of us are on a timeline and every second counts!
@bertapardo8590 Жыл бұрын
Recorde a mi papito Miguel. Es seco muy ingenioso 😘
@Whitepaint Жыл бұрын
The drill and spray-paint is creating a centrifuge. The contents is likely being separated by density
@user-jk1iq9vd1y2 жыл бұрын
Блесны из ложек я делал когда мне лет 10 было.. И кстати ловилось неплохо
@nikgorelow89532 жыл бұрын
Тебе сейчас сколько ??
@user-jk1iq9vd1y2 жыл бұрын
Старый. Полтос скоро
@nikgorelow89532 жыл бұрын
@@user-jk1iq9vd1y мне уже больше полтоса !! И такие блесны из ложек меня научил дед делать в детстве !!
@user-jk1iq9vd1y2 жыл бұрын
Интересное совпадение. И меня дед научил А отец , так в голодные 90е делал мормышки и блесны профессионально, сдавал на реализацию знакомому продавцу со старого "птичьего рынка"
@nikgorelow89532 жыл бұрын
@@user-jk1iq9vd1y и мормышуи самопайные из свинца и припоя ??
@marilzedossantosbrito56662 жыл бұрын
Merci d'avoir laissé l'audio d'origine 😉
@valtersouzaribeiroribeiro95342 жыл бұрын
Parabéns muito bom bom
@GPDIY2 жыл бұрын
I really enjoy your videos!
@pemudapegiatchannel90332 жыл бұрын
Amazing konten Kreator teknologi inovatif and Education full good job and good luck i'm From INDONESIA
@nawangdiy26492 жыл бұрын
Wow amazing ideas friends . ❤️👍
@oblivionmedia2 жыл бұрын
You, sir and a bloody genius!!! Thank you for sharing this with the world!!!
@TPS0702 жыл бұрын
*are a bloody genious*
@unsteadyeddy31072 жыл бұрын
You spelt genius wrong. But I'm sure we'll get it on the third try! Never give up, people!
@dragunov5252 жыл бұрын
I don't know why I never thought of using a jack to take apart pallets.... I learned something useful, thanks!
@ExyleCage2 жыл бұрын
That can mess up the jack. At least, that's what I've been told.
@ZAHADYZUNNYCANTERO2 жыл бұрын
¡¡¡¡¡¡¡¡¡¡¡¡SOS UN GENIOOOOOOOOOOOO!!!!!!!
@gabrielabaumgartner97872 жыл бұрын
Super ! Makes me smile 😅
@commercialconcepts2198 Жыл бұрын
Boom! The skid one is a game changer! Thanks!
@Phoenix-One09222 жыл бұрын
Oh wow!! What a Mind at "work"... What a "genius"... Oh.. I never new such greatness could be true, oh master... I'm already at "another level"... Bless us all with your "ingenuity" and "greatness, master of all the secrets of the Universe.... Mr inventor... Now I can bask in the light of your "unsurpasable and useful ideas" that will carry my Soul to the next level of existence... Before you came, I couldn't find a way to fix my $2.00 broom, or spin and mix the paint in a can, or plug all of the wrong sized holes I made in my petty life... but most of all, Now I can screw and unscrew, Finally! all the left over projects with all the loose bolts because I could not "afford" a crescent wrench in my poor and miserable existence! Thank you Master!!! Bow, Bow, Bow in reverence to your omnipotent presence, Bow, Bow, Bow wow!!
@chenks542 жыл бұрын
Phoenix One - you have to understand .. there are a lot of morons that watch these sort of videos - people that are incapable of creative thought. Unfortunately there are too many videos like this.
@user-rt1zo8oc5s2 жыл бұрын
@@chenks54 а при чем тут "творческое мышление"? Из всего видео рабочими являются 3 предмета, но с оговорками. 1. Блесны из ложки. Их ещё мой дед в молодости делал. 2. Расборка подонов домкратом. Для нескольких подойдёт, на если нужно разобрать много подонов, то легче подложить кусок дерева под фомку. 3. Самодельные венчики для краски. Этот способ подойдёт только для лёгких красок, которые в ручную размешать быстрее. А если нужно размешать что-то более плотное, вроде битумного праймера, то нужно использовать крепкий заводской венчик. Вот и выходит, что эти видео просто засоряют голову.
@American-Plague2 жыл бұрын
So we just scored that spoon with the tip of a drywall screw and snapped it in half?
@ellirechy35462 жыл бұрын
Thanks for the tricks. But I don't know why you have all your tools rusted man. You should go buy some new ones.
@user-bq2dd8ks2p2 жыл бұрын
Что для Европы - гениально, то для бывшего Союза - элементарно!
@jarosawdobas63272 жыл бұрын
tak, sowiecka technika zawsze była znana w Polsce. Na przykład wbijanie śrub młotkiem
@evgeniyson32342 жыл бұрын
@@jarosawdobas6327 я про польскую технику вообще не слышал.
@user-rt1zo8oc5s2 жыл бұрын
@@evgeniyson3234 а как же знаменитые инструменты для ПШЕничных полей?
@1nsanewayn32 жыл бұрын
2:05 CENTRIFUGAL MOVEMENT WILL NOT MIX THE PAINT WELL. SHAKE WELL.. NOT SPIN WELL BEFORE USE. TOO MANY EFFORTS ANYWAY.
@dannyhorn9195 Жыл бұрын
Great ideas Mr Inventor👍
@valerijsmisanins24782 жыл бұрын
Спасибки😁👍
@kidvicious2227 Жыл бұрын
A clamp to carry a small ass piece of wood, really. That's a life hack lol
@darkpaxgaming2 жыл бұрын
That First Tip wouldbt Last Long IT will Break the Plastik very fast 😂
@vadimgor44442 жыл бұрын
Сюда надо добавить ещё один совет,что делать,если вы упали в яму с тигром: открутите себе яйца и выбросьте их. Они всё-равно вам больше не понадобятся!)
@zouhairhamid13712 жыл бұрын
Bonnes idées merci
@johnkennedy51112 жыл бұрын
I already knew about some of the things, but some I didn't. Very cool stuff.
@jamesgarrett6848 Жыл бұрын
Hahaha...im sure everyone has all these tools and a shop not to mention the "mechanical" inclination and the time to do this stuff when its cheaper and quicker to just buy the tool thats already out there.....hmmm!...the tightening the bolt with another bolt is hilarious...because i only have one wrench period!!!...c'mon...i swear this $hit is absolutely hilarious!
@delfimleal11532 жыл бұрын
Adorei 🇵🇹🙏
@joeeaton1942 Жыл бұрын
Shouldn't be using a drill to drive screws in any way a drill is for drilling a driver is for driving
@js_youtube702 жыл бұрын
Give you some ideas so when you go up and down the aisles in Harbor freight 😂🤣
@wengcanezocrizaldoiiitv24862 жыл бұрын
Great ideas!
@mamamoon65 Жыл бұрын
New subscriber. Excellent video! Thanks for sharing your knowledge!
@user-ix6dc8qe9f Жыл бұрын
О,, класс! С уважением и почтением.
@jackriley5974 Жыл бұрын
Don't quit your day job!!
@lucysaba96822 жыл бұрын
Wow, felicidades.
@edivaldoisabel2 жыл бұрын
Muito bom.
@user-qk8mk2uc2v2 жыл бұрын
Видео для людей без фантазии. Пользуйтесь! :)
@jrohnenglish97812 жыл бұрын
Love the elon musk hack saw
@user-ng6xq9tg6z2 жыл бұрын
Интересно, но некоторые сюжеты взятые из других роликов, и становится не понятно, кто у кого срисовывает и на кого подписываться.
@majackslelo8272 жыл бұрын
WOW!!!👏🏿👏🏿👏🏿👏🏿👏🏿👏🏿😎
@krayonc2 жыл бұрын
These are some of the best ideas that I've ever seen. Excellent!
@KarrierBag2 жыл бұрын
Some I laughed at, some I cried at yet some I was very impressed with.
@Baetzibaer2 жыл бұрын
Wer Maschinenschrauben so in Holz festmachen will, frißt auch kleine Kinder 🥴
@kathlenesmith8302 жыл бұрын
First video of this type that was worth watching. I'm a subscriber now!!
@Fakken282 жыл бұрын
Lmao the pencil one was hilarious
@dennishein28122 жыл бұрын
Some of those are mighty old tricks.
@duniakuliner88172 жыл бұрын
good sharing, so useful
@RoRoTech2 жыл бұрын
Great video, keep up the hard work 👍
@joselopezcamba54832 жыл бұрын
Buenas ideas !!!
@rebecaandrade9325 Жыл бұрын
It’s easier and safer for me to buy the stuff new than to buy all that equipment and spend hours making or fixing stuff.
@patty-ow9ul2 жыл бұрын
I'm sure Einstein and tesla are shaking in there boots ,that there genius has been over shone by these ideas.
@duggydugg39372 жыл бұрын
rubber band on hand clamp .. clever
@ucthonguyen30372 жыл бұрын
Bạn có nhiều mẹo và sáng tạo nữa
@melkel20102 жыл бұрын
4:57 No way! No way! Woah!
@brigittemensah-attoh70122 жыл бұрын
Wonderful 👍
@chenks542 жыл бұрын
Would help if you could spell the word 'genius' properly. Incidentally, I was making fishing lures from old spoons about 50 years ago, when I was a young kid.
@giuseppegarro69772 жыл бұрын
Bello il giravite che scivola sull' amianto complimenti perbacco
@shyskeleton16652 жыл бұрын
I have to say all of these are awesome ideas and would definitely help but 1 thing. The pencil. Thats got to be 1 of the dumbest ideas. Hell just scribb underneath the wood. You dont need a 90 degree angel pencil. Not only that when you have to sharpen your pencil and your close to the seem you have to throw it away.
@JagoffCitizen2 жыл бұрын
Ikr, I thought it must have escaped from an April 1st video
@woodturner70862 жыл бұрын
Try it all in real life it don't work that way
@grindle12342 жыл бұрын
love the bit where he fucks up a pencil for no reason