Genius DIY Door Latch Ideas and Homemade Security Locks |

[@hungchevlog]

Cảm ơn QUANTUM TECH HD đã giúp tôi mang lại thêm giá trị mới đến khán giả.

[@watnow7284]

mẫu số 01 hay quá, yeah...

[@dimitriedumbrava8000]

Danke!

[@АлександрЯ-ю7с]

Я за свои 45 лет сделал всего 4 примерных защёлок . Сейчас желание пойти и некоторые переделать. Спасибо мастеру за показ такова видео.

[@filiptomek3695]

Если на защелке есть висячий замок, для его открытия достаточно отвертки. (Защелка крепится доступными винтами). Это шаблон?

[@Olenewod666]

@@filiptomek3695 полагаю это просто для демонстрации, ведь при желании, можно просто приварить всю конструкцию, или закрепить болтами на подобии мебельных, где шляпка болта вообще не имеет шлицов.

[@lydmilag4077]

А открывать как?

[@lydmilag4077]

Выйдешь,захлопнется и в дом не войдёшь

[@ПавелК-о3м]

@@Olenewod666 везде где есть висячий замок, делов не больше 5 минут.

[@ZahodaGenadiy]

ДА....... Это актуально...)) Не зря говорят: "Все новое, это хорошо забытое старое"! Но в любом случае сохранил и благодарю за щедрость... С меня жирный лайк )))

[@dave56ize]

I saw the first latch in the video used on an old barn where my Dad grew up. (He was born in 1910, the barn was older than he was.) All the doors and gates in the barn had that type of latch. Then he built one for a gate to our pasture. It could be opened and closed from either direction, but used the same concept. It has the rings on either side. Those were not made from a section of pipe but were made from metal rod and formed into a circle using a forge and an anvil.

[@Eric-gi9kg]

And because they were forged.. they were very strong

[@PopsOnethirtyfive-vb8tr]

The second type can be purchased at any Ace Hardware store in the US or from Trooper in Mexico or from Sinsa in Central America.

[@BleskofTruth]

Bro but tell me what u will do if it gets locked from outside 😭

[@richardtuholsky4028]

Let’s go brandon 🍦🍦🍦👍🏻

[@ВалерийБарановский-н8и]

Привет! Ну ты друг мастер своего дела, очумительные самоделки, таких мы ещё не видели, молодец

[@HuongPham-bx5dn]

Mình rất vui vì một kênh vlog của Việt Nam được một số bạn bè quốc tế chú ý đến 😀

[@НиколайКовалев-ъ3ы]

Это всё знакомо но вот кто нибудь наладил производство чтобы можно купить в магазине кое что можно делать из пластмасы задейсвовать инвалидов заключены.

[@thanhnamnguyen2790]

Ko biết lấy video đã xin phép chưa hay là ăn cắp

[@HuongPham-bx5dn]

@@thanhnamnguyen2790 ích nhất người ta cũng có ghi nguồn tử tế, chứ không như một số bộ phận người Việt ăn cắp video, không ghi nguồn, còn tự nói là của mình

[@ChiChi_Mother]

So proud of Vietnamese's human 👏 hùng chế rất giỏi

[@johnpierce2390]

Need to tack welded the screws so you don’t just unscrew the screws and open the door

[@joe13franco]

I was just going to say that those locks are worthless if all they have to do is takeoff the screws but then I seen your message.😂

[@minercraftal]

The point is those lock mechanisms are easy and nice to use, and of your’s problem, just drill extra screw behind the mechanical bars that’s it, fixed.

[@sparkywilson1405]

I think these are just proof of concept, but you're definitely right

[@rudolphyustian4024]

Just don't get yourself locked by accident..

[@saintracheljarodm.holy-kay2560]

Be quiet that's the spare key😁👍have no idea where the ice cream went!

[@lucbgg]

Very nice designs and realizations. One flaw nevertheless : the locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to enter these rooms. If you can manage to have a indoor attachment, then this last problem is fixed. Anyway, again, very nice work.

[@blondegerman4461]

THEY DELETED MY SAME COMMENT.

[@40HDR]

Locks only keep honest people honest.

[@oscarherrera9049]

You can weld it

[@eyellgeteven9928]

Just put bolts all the way through the gate, and double nut them, or weld them so they can't be removed easily.

[@mpirokajosephmgcokoca2355]

@@40HDR hahahahahahaha 😁

[@comelytravel]

I pray who ever sees this be successful in life ❤️

[@raimundoarce7014]

🤝

[@hawaiiandakine8304]

Did you really pray it or just type it?

[@anmarfigueiredo8644]

God bless u. 🙌🙌🙌🙌

[@comelytravel]

@@anmarfigueiredo8644 Amen

[@camkai1998]

@@hawaiiandakine8304 🤣😂🤣

[@jmatt4life]

Top notch ideas! I wish I had doors that need latches and the tools to make them.

[@peterbaxter8895]

🤣

[@АртурБ-т5г]

@@peterbaxter8895, ?

[@peterbaxter8895]

@@АртурБ-т5г Not sure what the confusion is? OP made a joke, the joke made me laugh, pretty simple stuff.

[@AGRIMOVIEemi]

Great job 👍🏻 👏 👍🏻

[@blondegerman4461]

The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!

[@Pyc_82]

Красота механики своими руками) класс!

[@АнатолийМыльников-п6ж]

Прикольно))) но часть запоров (с замковым фиксатором) легко откроются с помощью фигурной отвертки)))

[@cornelmasson4610]

I love "developing world" inventors! Welder, bender, angle grinder, drill & ingenuity. 👍👍

[@D-train69]

Nice flip flops and shorts playing with a welder.👍

[@uniqko]

Amazing

[@АлишерКараев-ж9б]

С некоторыми системами можно самому остаться за дверью 😉

[@Russia54_]

А с некоторыми можно случайно палец сломать.

[@user-xr777-e6l]

А везде саморезы выкручиваеш и вуаля

[@ZabotinDima]

Через два месяца все это заржавеет насмерть и работать перестанет. Арматура - совершенно не подходящий материал для таких изделий.

[@Barrett_Fodder]

I remember a few of these latches on farms of my youth and to see them and others come to life here is incredibly satisfying. I think i'll use a couple in an upcoming gate project or two.

[@missportsentertainment896]

Vietnammmmmmmm ❤❤❤🇻🇳🇻🇳🇻🇳

[@LosPavlotzky]

Un genio !!! ojo las patas al soldar en ojotas....jaja. Abrazo.

[@thepowerofelectron9860]

Simple yet incredible!

[@SpliffyMeister]

Except all it takes is a screw driver to gain access

[@blondegerman4461]

The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!

[@redfailhawk]

It never ceases to amaze me what I will watch between 11.30 and 2am.

[@blondegerman4461]

The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!

[@maxheadroom8765]

I love the safety flip-flops!

[@AWSmith1955]

He should update to Crocs, That way only half the welding spatter would burn his feet.

[@blondegerman4461]

The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!

[@tr.moreira1293]

Bom dia a todos vcs aí abraços forte

[@johndalton7878]

Bom Dia , otimo Video 👏 saudações da Áustria 👋

[@Berkana]

7:54 The problem with any latch design which has exposed screws is that it can be easily defeated by simply unscrewing the mechanism from the door or door frame. In its locked position, all the screws should be obscured so they can't be reached by any screwdrivers. The mechanism should only be removable when it is unlatched.

[@oziasideiascriativas]

Muito bom esse video criativas em ação pequenas ideias para o nosso dia a dia top 🤜🤛🙌👍😁

[@BXBvlog]

kzbin.info/www/bejne/q57UomWemq2Bpq8🤝🤝🤝🤝

[@pikifrino]

Impressive work indeed!.. Congratulations!.. THANK YOU

[@incy55]

The first one. How do you open it from the other side? It's a nice idea but it seems you can get locked in very easily.

[@jessbirmingham889]

Yeah i thought the same, great until you pull it behind you without thinking.DOH

[@quytki]

Use for the gate man.

[@showxating9885]

My dad built the loop latch back in the 80s with a steel ring with a bilt through it, sandwiched between a piece of 1" flat steel stock folded in half. It's on the gate to this day, so a testament to the design.

[@3102nzain]

Can I ask how do you open this latches from the outside just incase you accidentally lock it and no one is inside to open it for you.

[@mach1553]

Thanks I needed this!! ⭐⭐⭐⭐⭐

[@CreativeIdeasMaker]

Hi my friend, I enjoyed it, great as always, thanks for sharing👍👌👏💙

[@ВладимирВладимирович-ы8ч]

Честно сказать очень впечатлен такими простыми вещами. Особенно понравилась первая защелка "колечко" Век живи век учись Спасибо.

[@MaratAG]

Осталось только понять как ее снаружи открывать

[@sergei-1955_s]

@@MaratAG "Дёрни за верёвочку, дверь и откроется" - сказки читать нужно! :-)))

[@ВладимирЛидке-г4ь]

А нафига все эти механизмы с замками, если они все на саморезы прикручены? 🤣

[@ВладимирБир-ж9к]

Спорные очень механизмы. Если закроется, а ты остался с другой стороны, тебе никто не поможет...

[@АлександрКузнецов-р5з8б]

Вот и меня мучает этот вопрос. При наличии шуруповерта замок как брелок.

[@sawel6073]

Чтоб заепаться, пока их изготавливаешь. , ;))))

[@ВладимирЛидке-г4ь]

@@sawel6073 😂😂😂👍

[@MArh-ue4lw]

сварочные работы в труселях это верх мастерства🤣

[@niveknospmoht8743]

I like how all the latches in the beginning has all the phillips screws exposed. Not secure at all. Cordless screw gun has all those removed in less than 20 seconds

[@johnhawkinshawkins1284]

they're on the inside...

[@jessbirmingham889]

Yeah pretty pointless exercise really, like you say they can all be unscrewed

[@rigorpentolo3362]

You need because it’s inside hahaha…you don’t know anything about construction?

[@AdmiralStoicRum]

OMG! Youre so brilliant! Who would have thought! Lemme just float this though. What if, and Bear with me, the philips screws were for demonstration and ease of removal. Oh better yet, what if, when you make and mount this yourself, you used carriage bolts to secure the hardware?

[@KooperK36]

@@john.c it's not a lock it's a latch

[@annatullison1482]

Lowes and Home Depot don't compare to this man!!!! Wooooo WEEEEE!😉

[@seandepoppe6716]

Great job thanks for sharing

[@blondegerman4461]

The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!

[@edidaselva]

Grande abraço 🙌💖🙏

[@mikeraphone6745]

Excellent workmanship 👍

[@toddnewsom8129]

Loved some of the latch designs, however, all the latches with locks have exposed screws attaching them to the door and door frame. A person with a cordless drill/screwdriver could be inside the locked room in about 3 seconds.

[@whitefreeman5798]

i like it for the creativity.. work and design.. even if you put studs in it bolted on the inside someone can rip a lock off in a few seconds anyway with a prybar

[@WeighedWilson]

Anyone with a die grinder could cut the lock even faster.

[@wajidyoutuber4555]

Wow very good work Creative ideas Big like for this video

[@blondegerman4461]

The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!

[@ivanampuero581]

Está muy bueno y fácil de fabricar saludos y siga adelante

[@John01GM40]

for this design Hung Che reinvents the wheel (providing you have access to fabricating equipment costing a lot more than a latch of better quality would cost to buy)

[@andrey3701]

Из разряда "мы не ищем лёгких путей")))

[@jerrypeal653]

Always cracks me up seeing these beefy locks and wimpy mounting hardware

[@ЦифроградМабила-ш4ы]

Мастер Класс! Очень полезное видео!

[@bhagatsingh5019]

Thanks for uploading, sir.

[@6niva3]

Просто забавные игрушки.. )

[@smasoumi6944]

Interesting and beautiful ideas, thanks. ;) But don't forget to have your phone with you when you enter a room equipped with the first type of latch.

[@blondegerman4461]

The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!

[@robpotter1355]

@@blondegerman4461 They could use bolts with lock nuts on the inside?

[@blondegerman4461]

@@robpotter1355 Perfect Rob!

[@IndryanLongkutoy]

Temuan ide2 yg keren 👍👍

[@rocky4066]

xafiduka allaah sheekh mustafe wa jazaka allaah kheyr jazaa'

[@SANTEHNIK-KAFELSHIK]

Qachondir meni videolarim ham shunday koʻrishadi🎥👍💕

[@cleverboy3000]

Давай только не подведи))

[@SANTEHNIK-KAFELSHIK]

👍😀😀😀

[@lindalee3408]

I love hickidoos and jiggers. This was a pleasure to watch again. Thank you for sharing.

[@cryptosecguy]

The first one looks like a great way to lock yourself in a room with no way to release it from the inside

[@johnaustin6673]

unless you... I don't know, lean on it or put your foot into it.

[@catleugh]

Yes, no way I'd use it on my garage door.

[@blondegerman4461]

The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!

[@tomrogers9467]

What’s that terrible smell coming from the room??

[@rishanranatunga4851]

Nice varities..But I only need a Phillips acrewdriver to lift the locks .🧐

[@kuyareybikolanongmindoreño]

Very good idea. Your great!👍👏👏👏

[@phillipmccollough8707]

hope the wind doesn't blow the door shut with you inside.😂😂😂

[@うさ耳-c4i]

lol 絶対にストッパーを使ってください。そして絶対に犬を近くにこなせない。😂

[@stevesyncox9893]

Best on animal gates, with access from both sides for human

[@الحمدلله-ع8ح4ن]

💔😂😂😂😂😂 فعلاً خطيره جدا حتى الموت !!!

[@boytongo]

🤣🤣

[@whitefreeman5798]

great work.. very talented

[@blondegerman4461]

The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!

[@whitefreeman5798]

@@blondegerman4461 i like the design and work put into it.. it wouldnt matter if you put titanium studs in bolted in the inside someone with a crow bar or hammer can rip a lock off of pretty much anything

[@willwipf7030]

Love that video,my dad told me locks are only to keep honest folk honest ,a thief will always find a way in

[@blondegerman4461]

The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!

[@andiniagistantia5175]

Hello QT HD from INDO Amazing ..

[@deogiriyadav8399]

Respect from India....

[@gregjones3660]

Omg! Great video. Next can you teach us about drill machine?

[@blondegerman4461]

The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!

[@joniboni3691]

good developments, but most can be opened with a simple screwdriver

[@DL-kc8fc]

Great production. But it has one big flaw - the lock can be opened by unscrewing the cross screws. The lock must be made in such a way that the screw heads are hidden when locked.

[@schuttrostig5729]

Or use rivets, secures screws with welding or weld the screws to nuts on the backside: screw still spins, but nut wont come of. on some handles easy to cover the screws by moving the screw holes or enlarging the metal pieces to cover them.

[@dbwright1159]

That was the first thing I thought.

[@СергейНовосёлов-ф9ф]

ЗА ТО ЧТО СВАРОЧНЫЙ СВЕТ УБРАЛ, ЛАЙК!

[@angelahottel5013]

Es ist wirklich sehr hilfreich wenn man sich dieses Hobby der Metallverarbeitung zulegt💡Ich werde im Zweifelsfall ganz sicher darauf zurückkommen und mir etwas dazu einfallen lassen👍

[@gadgino]

😀

[@blondegerman4461]

Die Schlösser sind nutzlos, da die Schrauben der Verriegelungen zugänglich sind und von jedem, der dies möchte, mit einem Schraubendreher abgeschraubt werden können. Meine Kommentare wurden von diesen Leuten gelöscht. DIE WAHRHEIT TUT WEH!!!!!!!!

[@MrMuha777]

Классная идея , Оригинально.

[@dabunnyrabbit2620]

Love the rebar one.

[@josemendesdecarvalhocarval7295]

Perfeito perfeito 👏😎😀

[@xuandangvo3808]

Chưa hoàn hào đâu bạn người ta mở 4 ốc vít khóa mất tác dụng

[@SpliffyMeister]

Except all it takes is a screw driver to gain access

[@Sergeywarrior]

Только вот ширина шины должна быть больше,чтобы закрывать саморезы. А иначе замок бесполезен.

[@Henky-180]

het laatste slot is zo open te maken met een schroevenrdraaier. 3 boutjes zijn zo los. dan had je beter het bewegende deel wat breeder kunnen maken zodat de schroeven afgedekt zijn bij het sluiten. gratis tip. ;^)

[@rjw7058]

no doubt, great engineering

[@armadilllo]

stolen ideas, the sell every one of those at Home Depot

[@SpaceLanguage-ck1kx]

두번째는 내부일텐데 잠금장치있어서 자물쇠가 필요없는것 아닌가요? 만약 외부라면 안으로 들어갔을때 문이 자동으로 잠겨서 밖으로 나오지 못하잖아요.

[@demon6shadow179]

Genius!!!!!!🤘🤘🤘🤘🤘

[@blondegerman4461]

The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!

[@ФедорЕрмаленок]

В последней модели подходи с шуруповертом,и отворачивай саморезы-они пластиной не закрыты,и замок снимать не надо -снимется вместе с устройством после отворачивания саморезов.

[@robertgomes7548]

I love it I enjoy watching them make interesting stuff and watching them welding away on stuff and in the video there wearing sandals love it !!!!!!!!!!!

[@blondegerman4461]

The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!

[@Вот-ЯвасУжоОтсель]

Снято красиво, только вот вся эта фигня - тюремная, для запирания кого-то. В смысле с другой стороны не открыть, разве что выбить, а с этой выверни шурупчики - и пожалуйста...

[@chrisbiro1]

Actual dimensions and placement will be crucial to the first one working.

[@ramazanaliportakal6866]

Baston kilit takmadan kilitlenen kilit yapmaya çalışır isen daha iyi. Hemde çok iyi bir icat olur.....

[@YummyFoodLahore]

👍👍❤

[@JayRathideas]

Good ideas 👍👍👍

[@blondegerman4461]

The locks are useless because the screws of the latches are accessible and can be unscrewed by anyone wanting to with a screwdriver. My comments wrere deleted by these people. TRUTH HURTS!!!!!!!!

[@JohnJohnson-bx6li]

Cool latches but no real security. As built, none of them provided any level of security that could not easily be defeated. Excellent DIY for a low security need

[@ВладиславПлатов-и8б]

Самый лучший видеоматериал. Класс. Спасибо.

[@didierhugo9308]

les systèmes de fermetures sont bien, par contre ne mettez pas des vis autoforeuses où à bois car vous prenez un tournevis cruxiforme et vous ouvrez :)^^

[@llewellynlombard7428]

Very practical ideas, but one huge problem.............your mounting screws are exposed. They can be removed and entry is possible. Redesign your mountings and your designs are thief-proof.

[@aod7080]

Thanks For Sharing.

[@Удав-д2ш]

Замок с кольцом- снаружи захлопнешь, как откроешь?

[@ЕвгенийПавельев-в2я]

Нужно привязать веревочку !

[@BubupatianD]

Amazing 👍

[@LikeItOrLumpIt2107]

The first 2 latches have been used in the UK for over 50 years!

[@edmundooliver7584]

yes, its easier to buy them and who has a welder.

[@theoldmanreed8818]

Fo years is a drop in the bucket just made huh.

[@zombieregime]

I wouldnt say inventor or designer, per se. Ive seen all of these before is some form. That being said the use of materials and production methods I would certainly call innovative!

[@ElivisR27348]

¿Y qué harías si se te llega a cerrar la puerta por el viento o el olvido de las llaves? And what would you do if the door got closed due to the wind or you forgot the keys?

[@noodlesiis]

Am i missing something here but with the round first one you open the gate via the latch and go through but when you come back you’ve now found your locked out!

[@JoséAdemyVieiradosSantos]

Muito topp.. As ideias.

[@kwongchan5641]

I didn't understand, for example, the first circle buckle, how do I push the door open outside and come in?

[@Microbel2]

засов конечно приколный на 7:39 ...но саморезы то можно выкрутить вместе со всей конструкцией )))

[@hadiastro302]

Keren sih grendelnya Gerendel yang sangat bersahabat dengan obeng jadi tak perlu linggis 🤣

[@ungamer1]

very smart to use holding elements like bolts etc outside and use a lock ))) no need to have a picklock , need just a screwdriver to unscrew bolts to get inside... better to make longer "stands" to hold the construction with bolts from inside and outside part of construction to lock the door