GETTING PREPPED FOR GLASSING - Mr Aerodesign PC6 Turbo Porter

#pilatus #PC-6 #turbine In this episode we get the Door of the Cowl created and focus on getting the Fuselage, wings and all the surfaces ready for fibreglassing! Thanks for watching!
Check out the new website We are now the Primary Canadian Agent for SWIWIN Turbines! www.thelightersideofrc.com/shop
View the MR AERODESIGNS PC6 Turbo Porter build playlist here: • Pilatus PC-6 Turbo Por...
Chapters
0:00 Inro portion.
0:40 New Table!
1:15 Cowl Door
2:25 Bending Lube Pipe for Turbine
4:20 Cowl Door
10:10 Fuse Door Discussion
14:15 Filling and sanding begins!
21:40 Unboxing!
25:00 Back to filling and sanding
31:00 Closing
Scale: 1:5.2
Wing Span: 120" (3047mm)
Length: 83 1/8" (2111mm)
Height: 26 1/8" (664mm)
Chord: 15" (380mm)
Wing area: 1650po2 (1.064m2)
Weigth : 30 lb (13.6Kg)
Engine : 45cc (gas) or equivalent. This one will be powered with a Kingtech K45 G4 Turbo Prop
Kit is available at: mraerodesign.securicom.ca/en/...
scale tail wheel will be available from MR Aerodesign. Check out their website.
If you have any questions post them in the comments section or send me an email.
General: #TheLighterSideofRC #TheLighterSide #RCPlanes
- If you have any questions about items you have seen in my videos, build enquires, product placements, product reviews please contact me.
Connect with us
All Links Here: linktr.ee/thelightersideofrc
Purchase Bambu Products here: shareasale.com/r.cfm?b=228215...
Become a Channel Member: / @thelightersideofrc
Patreon: / thelightersideofrc
Website: www.thelightersideofrc.com/
Email: [e-mail]
Facebook: / the-lighter-side-of-rc...
Facebook: / jonathan.vogt.125
Instagram @thelightersideofrc. thelighters...
The Lighter Side Of RC AFTER DARK: www.youtube.com/@TheLighterSi...
Website: www.thelightersideofrc.com/
Email: [e-mail]
Facebook: / the-lighter-side-of-rc...
Facebook: / jonathan.vogt.125
Instagram @thelightersideofrc. thelighters...

[@thelightersideofrc]

So Happy that this step is done! Thanks for watching! If you have a min check out www.thelightersideofrc.com/shop

[@crunchied8]

for dings or wood dents you can use wet rag and a iron that brings out the dings of the wood its wood workers trick

[@thelightersideofrc]

@@crunchied8 thanks ! That’s an awesome tip!

[@crunchied8]

@@thelightersideofrc its togic if you work with wood alot you can also search for it on youtube for a better understanding it will reduce the putty on the models mate

[@thelightersideofrc]

😎

[@KIMI967]

Great job! It's a pleasure to follow you on this project! Can't wait for the next video!

[@thelightersideofrc]

Awesome, thank you!😊

[@IansRCExploits]

Some really outstanding modelling and prep work Jonathon👍😄

[@thelightersideofrc]

Thanks Ian!😊

[@FernandoSeca]

Its gr8 to see such a passionate person doing an outstanding model 👌 greetz from Germany

[@thelightersideofrc]

Thank you so much 😀. Thanks for watching!

[@FernandoSeca]

@@thelightersideofrc you are welcome! and thank you for all the informations and videos. keep em coming =)

[@CodeWorkscz]

Half an hour ago I finished the same process and your video came up. I am glad that you are kinda doing it the same way as I do

[@thelightersideofrc]

Nice! Thanks for watching Michal!

[@scaryxxl]

Jon! great job as allways! I want one of the jackets !! ruben.

[@thelightersideofrc]

Thanks Ruben!

[@WalterMitty1966]

Nice one Jon !! Are you going to use the Peel Ply method , for glassing ?? And , yes , I want a Hoodie !! I'd even wear it , when doing a Webinar , just to freak out the Customers !! lol Excellent , as usual mate Cheers Phil

[@thelightersideofrc]

Hello Phil! No Peel Ply Method. The big concern is weight savings. I'll be doing it a way that will probably raise lots of stink with people who think their method is better! HAHA. Anyway's started on the glassing today and it's going well. Video will be very detailed and i will show alot of the process.. Thanks for the feedback on the Hoodie's! I'm going to be working on doing a run of them very soon. Thanks for watching!

[@scottbuck9348]

Cant wait to see u wrap those weird contours in glass, I just got a new nitro rc boat that needs alittle glass work and I’m sure your video is going to help a ton! And I’d support you by buying one of those sweatshirts, I’d like to see the grey hoodie with either bright yellow or bright green letters, that would look great! And oh ya who is the one Jerk that disliked this video, do you not understand how much work went into this production, I’m soo very grateful that your on KZbin and giving us all this free information!!! And any idea on your next project? I’d love to see some more jet stuff like a scale yak 130 or scale f14,Keep up the good work my man. Thumbs up 👍🏿

[@thelightersideofrc]

HAHA! Yea Scott I started on the glassing today. Some of it is simple and some of it is a bit more challenging! Like the curves in the fuse! There is always one in the group that likes to thumbs down everything......Oh Well..🙌. Thanks for watching!

[@demetriodelgadillo1629]

great job keep on building

[@thelightersideofrc]

Thanks, will do!😎

[@DadsRCHangar]

I am so behind with your build on this bird. Will catch up 👍🏻👍🏻

[@thelightersideofrc]

Haha! Thanks for coming back! Get caught up! Lots happening over here!

[@bryceverreyen9341]

Great tutorial on how the cowl door is made using the offset hinge! That is the solution to a problem I’ve been having for quite a while on my scratch build. I have been waiting for the fibreglassing video since the start of this build! Can’t wait!

[@thelightersideofrc]

Glad it was helpful! As I mentioned in the video it's one of my favourite ways to do a door like this. I much prefer it to using standard hinges. The glassing video should be out next saturday. Got a great start on the glassing yesterday. Thanks for watching!

[@MsPokey1234]

Beautiful job Jon, Now move to USA> NJ > exactly next door to me so you can help me make Fuel Cans! Dean/JM

[@thelightersideofrc]

Haha! If your weather is better than here I would be tempted! My wife and I were just talking about that last night

[@tord5721]

I second the other comments. Great stuff! I really enjoy learning, and you're a great help for just that!! Thanks for your time and effort. I will absolutely support you with a hoodie👍

[@thelightersideofrc]

Awesome, thank you!😊

[@94opel]

I need one of them hoodies :)

[@thelightersideofrc]

Thanks 😊. Working on it!

[@echosmoke]

as always great job on the build the new hoodies 👍

[@thelightersideofrc]

Thanks 👍

[@johno9507]

Did you sort out the Tricycle/bicycle weight and balance issue on the F-18? FYI bicycle gear is a tail dragger. We use a very similar system to do weight & balance on Boeing 767's & 747's...only on a much larger scale! 😀

[@thelightersideofrc]

Hello John. Yea it was just a glitch in my scale setup.

[@johno9507]

Could you please do a test of the best glue types for different uses and materials types, thanks. 🇦🇺

[@thelightersideofrc]

Hello John. Coming up soon!😎

[@helischorsch9786]

👏 great job! It’s one of the aircrafts you don’t like it on the first look, but it is a very cool one 😎 looking forward to see the glassing. Cheers from Munich🍺

[@thelightersideofrc]

Thanks 😊. Soooo true!

[@alric9562]

I'm in for one of th hoodies Jonathan. Looking forward to glassing process. Never done it before. I will need it on my next built project.

[@thelightersideofrc]

Thanks Al! Started today. Lots of detail in the glassing video.

[@philippebaudon]

Bonjour Jonathan, you know what ??? you can work in Boeing company ( or Airbus company I prefer ). lol. always very interesting footage. I give 2 days ( not more ) for holidays.

[@thelightersideofrc]

Thanks Philippe😎

[@flightsystemsrc]

Count me in for some hoodies when available .

[@thelightersideofrc]

Thanks Sal!

[@rayshivjee2672]

Great video as always. What’s the cool tune you use during the time lapse sections? Defo up for a hoodie too!

[@thelightersideofrc]

Thanks 😊. It’s one I found on KZbin music library. Called Don’t wanna

[@robin1831]

👍👍👍

[@thelightersideofrc]

🙌

[@ezb77]

I'd buy one of those hoodies... Not that i need it but why not support you in that way...

[@thelightersideofrc]

😎👍

[@MsPokey1234]

That Airplane's got to be for Jeff Bezos ~ he is the only 1x that could afford the cost of that great building & QUALITY!!!

[@thelightersideofrc]

Haha! Thanks Dean! I try my best of everything I produce!

[@johno9507]

Wouldn't it be easier to sand the putty if you added microballoons to it, and it would make it lighter.

[@thelightersideofrc]

Yea that would make it easier but it’s still pretty easy to sand. Great idea I will give it a try!

[@clubaeromodelismograncanaria]

👍

[@thelightersideofrc]

🙌😊

[@dougmcconville1848]

Great build! Question, what did you use to glue the G10 strips to the cowl?

[@thelightersideofrc]

Thanks Doug! for most of the cowl work I was using west system six 10. mainly because I had some on hand and our local hobby store was out of Hysol.

[@vidar7106]

I was curious what your source was for the magnetic table top is? BTW really enjoy tor videos. :-)

[@thelightersideofrc]

Thanks for watching! The magnetic table top is a magnetic white board from an office supply place. They come in various sizes.

[@gregcameron9953]

You still have hoody's available?

[@thelightersideofrc]

Yea. What size are you needing?