Getting started on my 1972 chevy c30 shortbed dually "Evergreen"

[@cliffordkeller3256]

Evergreen is great iam with pops

[@HarmonGarage]

Thank you

[@jeffdillard5742]

It’s an Epic name, it really is

[@Jason-hm9hr]

I just found your channel I've watched about 2 seconds and I see a yard full of C10 I'm here

[@HarmonGarage]

Welcome

[@jeffdillard5742]

The channel is great. The content can be applied to the average person in his/ her driveway

[@budbrown5687]

Evergreen is gonna be such a wicked build, I think its gonna be the project that really puts Harmon Garage on the map.

[@HarmonGarage]

That would be awesome. I hope your right

[@jeffdillard5742]

Lots of great content happening

[@tomharmon743]

Thanks for the comments, i hope im a help and not a burden, i enjoy helping him when im here, and i hope im not making a fool of myself trying to help him

[@HarmonGarage]

This is “Pops”, and don’t worry dad, your doing great

[@jeffdillard5742]

It seems from a limited video perspective that you are a great help. I hope you are doing well!

[@garysistrunk1700]

Glad to see you start the show truck! 😊

[@HarmonGarage]

I had to get going on it. 6 months isnt very long when you have other projects

[@jeffdillard5742]

Me too!

[@DaleVandewalker-lj7mj]

RJ the little truck that could.

[@HarmonGarage]

Yes sir

[@jeffdillard5742]

👍🏼

[@jeffdillard5742]

👍🏼

[@steelmill]

Hey Aaron ,it's great to see you and your Dad working on these projects together.

[@HarmonGarage]

Thanks. I enjoy his company

[@jeffdillard5742]

I agree!

[@MrMadkaw400]

Yes finally

[@HarmonGarage]

I agree

[@jeffdillard5742]

👍🏼

[@gmray7301]

Great to see you again buddy

[@HarmonGarage]

Thank you

[@mattsmith5300]

Love it, it would be cool as a single cab short bed dually lowered and tubbed should be sweet

[@geraldrichards6218]

I agree

[@HarmonGarage]

Thank you

[@HarmonGarage]

Thank you

[@juniornunley5412]

This is going to be a great project for the show. I can hardly wait to see the next video. Take care and tell your dad that I said hi.

[@HarmonGarage]

Thank you and I will definitely tell him. Another video will be out on this truck on Tuesday afternoon

[@jeffdillard5742]

I agree

[@samfisherskiller]

👍

[@HarmonGarage]

👍

[@paulbickmore4523]

71,72 are my favorite yrs

[@jeffdillard5742]

👍🏼

[@HarmonGarage]

This is the first one I’ve owned

[@mrchevytrucks666]

Can't wait to see it done

[@HarmonGarage]

Thanks

[@mrchevytrucks666]

Welcome

[@jeffdillard5742]

It’s going to be great!

[@jeffdillard5742]

Rock and roll!

[@HarmonGarage]

Yes sir

[@bigchrisgto]

My dad had a 69 one time he pulled the 3 speed Manuel out after it broke and put a turbo 350 in place he cut the cross out like I plan and added a rear cross

[@HarmonGarage]

That’s what I’m planning on doing. I have to cut out the front transmission crossmember and the carrier bearing crossmember

[@MikeyMikeM21]

Ah man that thing is gonna be sweet. Glad you made time for yourself.

[@jeffdillard5742]

It’s going to be an awesome build!

[@HarmonGarage]

Thank you. There’s another video coming up on it next

[@HarmonGarage]

Thanks, I hope so

[@stevepratt7959]

Come on 300 can’t wait to see progress on Evergreen 🌲

[@HarmonGarage]

Thank you

[@jeffdillard5742]

One closer to 300!

[@randaltucker2981]

I am rebuilding a 1970 C/30 c&c dually right now. So I will be following every video you put out in this series. 350/Turbo 400, 4.10 14 bolt, power steer/brakes, and factory a/c.

[@HarmonGarage]

That’s awesome. Best of luck on your build. Thanks for watching

[@jessekeesee1836]

So excited to see your vision come through on Evergreen.

[@HarmonGarage]

Thank you. I hope it comes out the way I see it.

[@jeffdillard5742]

It’s going to be a great build

[@StevenWeinberg-t7x]

Interesting project, I myself once owned a 1972 C 30 fully it was a nice truck.

[@HarmonGarage]

Thank you

[@jeffdillard5742]

👍🏼

[@michael_house]

Nowhere near first comment this time - but man - you're getting things done this week!

[@jeffdillard5742]

He’s having a good week!

[@HarmonGarage]

Trying to. Pops is a big help

[@fredmccasland7204]

I'm looking forward to evergreen build. And you're not getting old my friend, sorry to say, you are old. Have a great day 😂

[@HarmonGarage]

At least your honest. Lol

[@mickeyhoward3628]

As usual you hit the ground running. That bed removal was a battle.

[@HarmonGarage]

It sure was.

[@jeffdillard5742]

It was fun to watch!

[@RichardBerry-v5i]

Keep up the good work

[@HarmonGarage]

Thank you

[@jeffburk4210]

Looking forward to seeing more of this build.

[@HarmonGarage]

Glad you like it.

[@jeffdillard5742]

It’s going to be great!

[@jessekeesee1836]

I would be interested in a tee shirt as well.

[@jeffdillard5742]

Me too!

[@HarmonGarage]

Thank you. I will put out the info soon

[@headersandstrings6737]

That’s going to be a cool ride when your done!

[@HarmonGarage]

I hope so

[@jeffdillard5742]

👍🏼

[@jeffdillard5742]

I agree!

[@MikeHopkins-n1s]

Old Rj sound pretty healthy

[@HarmonGarage]

It definitely is. Little hot Rod 307 with a big stick

[@MikeHopkins-n1s]

@@HarmonGarage what size motor u putting in evergreen

[@HarmonGarage]

You will never believe me until you actually see me do it. It will be in a video soon

[@MikeHopkins-n1s]

I bet it a big block a in line six

[@MikeHopkins-n1s]

And did u send my shirt out I told my wife it would probably that a couple day to get it

[@jeffdillard5742]

Great video, this is going to be an awesome video. The shirts are great! Commenting from Garland Texas

[@HarmonGarage]

Thank you. See you this weekend

[@SherylSmedley]

Evergreen s going to be a great build!

[@HarmonGarage]

Thanks

[@cliffordkeller3256]

R j ‘s motor needs some attention to smoking a little but that also gives caricature

[@HarmonGarage]

I knew someone would comment on that. It’s a little rich and I have the choke wired open. And the tens sprays fluid on the exhaust. It’s not burning or using any oil. I just have to swap out the trans and change out the metering rods in the edelbrock. Just only drive it about 4 miles a day so I just leave her fat and happy

[@jeffdillard5742]

👍🏼

[@rickhughes9385]

I smiled when the cherry picker came out That’s something I would do Country boys at work!!

[@HarmonGarage]

Yea, gotta do whatever works. Lol

[@rickhughes9385]

BTW I just found your channel this morning and really liked New Subscriber

[@HarmonGarage]

Thank you. I appreciate it

[@workingmansrestorations7071]

Glad to see you starting on Evergreen. You have good ideas so it will be cool to see what you do to it. My k5 blazer has a tube front bumper that needs paint. I am going to try vht paint you used on shortys frame.

[@HarmonGarage]

Thank you. The paint works great but the better you shake it the better it works. I tape the can to a sawzall blade with gorilla tape and use a sawzall to shake it

[@workingmansrestorations7071]

@HarmonGarage I was wondering why the can was covered...

[@jeffdillard5742]

A Sawzall as a paint shaker….. Now I’ve seen everything

[@MrMadkaw400]

What about your blazer does it have a rear gas tank you can use

[@HarmonGarage]

If there’s one in it it is no good

[@roberttemple9474]

Man I wish you were closer to Texas. I really need that bed you took off evergreen for my 94 3500 HD 1 1/2 ton project truck.

[@HarmonGarage]

I moved here from Texas. But I already have plans for the bed. It’s going on pops 48 Chevy. Eventually

[@roberttemple9474]

@@HarmonGarage nice. Hope to see it on your channel.

[@HarmonGarage]

It definitely will be. It’s in line to get done wventually

[@jeffdillard5742]

I wish he was closer to Texas too. Or I was closer to Alabama

[@kevinbourg1837]

How about a stepside with widened fenders?

[@HarmonGarage]

It’s setting a fleetside bed with fenders.

[@jeffdillard5742]

👍🏼

[@Jefferson-r1j]

Evergreen!

[@HarmonGarage]

👍

[@workingmansrestorations7071]

1.5 hr to do a couple minute job... yupp. Sounds about right. I am hung up on an old pilot bushing. Won't come out. Bread trick, bolt and screwdriver trick... nothing.

[@HarmonGarage]

I use toilet paper or grease. Same as the bread trick but the toilet paper works alot better. Make sure the punch that your using to push it in is close to the size of the pilot bushing. If there is too much space it won’t work

[@jeffdillard5742]

👍🏼

[@leroyll1144]

STUMPER.!!!!

[@HarmonGarage]

Lol

[@jeffdillard5742]

👍

[@daledassel5658]

Bertie the burnout truck.

[@HarmonGarage]

Lol

[@stevepratt7959]

Another one for the 300 lol?

[@HarmonGarage]

Thank you

[@stevepratt7959]

@@HarmonGarage no problem

[@jeffdillard5742]

And…….. here’s another!

[@stevepratt7959]

@@jeffdillard5742 another one lol

[@gmray7301]

Extra large please

[@HarmonGarage]

👍

[@bigospig]

That bed removal was painful to watch. 😆

[@HarmonGarage]

It was not fun at all. I need a tractor

[@jeffdillard5742]

👍🏼

[@HellTriX]

sorry someone told you it was a 350 :(

[@HarmonGarage]

It happens. I will come across a 350. No big deal

[@jeffdillard5742]

Same thing happened to me a little while back

[@randaltucker2981]

Stock on mine is an 014 4-bolt main. I wonder if yours was the same. Great motor that they also used in the LA built Z-28. It really likes a Holley 1850-2 (600cfm), kinda sluggish with a 750cfm.

[@daledassel5658]

Be careful to not burn yourself out trying to do too much! Ask me how I know…

[@HarmonGarage]

That’s an everyday thing for me

[@johnhachmeister6599]

👍

[@jeffdillard5742]

👍🏼👍🏼

[@johnhachmeister6599]

@@jeffdillard5742 who are you

[@jeffdillard5742]

@@johnhachmeister6599 I am a friend of Aaron’s. I’m trying to increase his number of comments to help the algorithm for the suggestibility of his channel on KZbin. I am the owner of the “Shorty” truck build on his channel

[@johnhachmeister6599]

@@jeffdillard5742 ok

[@HarmonGarage]

👍