Getting Started With ESP32-C3 SuperMini DEvelopment Board || Espressif ESP32-C3 With Arduino IDE

[@dreamfly555]

On mine, selecting the board as shown worked but Serial monitor is not. But selecting board "MakerGO DSP32 C3 SuperMini" worked, even without changing LED_BUILTIN to 8 because it's value is already 8.

[@AWBuilder]

I wonder why the Blink code loads the wrong pin number for the LED? I tried to trace it and a file called soc something is loaded, but I couldn't locate that file on my PC. A comment below suggests MakerGO DSP32 C3 SuperMini as the correct device, and that worked for me.

[@The_Unobtainium]

doesn't work. Mine esp32-c3 Supermini is not appearing in COM ports:/

[@EldarWorkshop]

make sure you are using an USB cable with data transmission wires. Some USB cable are for charging only, those will not work and won't even appear at Windows Device manager. If it is showing on the device manager, then it is a driver problem

[@turkeyaccobaida]

@@EldarWorkshop i was searching the whole internet for this problem , but finding the solution in a youtube comment is something else , THANKS ELDAR

[@EldarWorkshop]

@@turkeyaccobaida glad I was able to help!

[@Cyber_Gas]

Try installing the drivers

[@ashdt3779]

Where to find the driver? It doesn’t show up as com port here

[@worldexplorerPL]

hello, did you solve the problem when esp does not expose the com port?

[@Jim_One-wl4ke]

Just what I been looking for..so tiny a powerful dev board. And also the development environment behind u..with natural sounds background best for peaceful intuitive expressions arts or invention 👍👍love it. Thanks for sharing ❤

[@masudrahaman7497]

How to control the relay by mobile can you make?

[@ep_dimi]

hello and thank you for the video. This module lucks of rf shield, please let us know about the wifi and ble behavior in noisy or not environment

[@crystian7016]

If your board doesn't power two leds when you plug the usb cable, it's damaged. One of mine was. The red led indicates power, the blue led probably indicates communication.

[@CrazyCoupleDIY]

Bule is RX / Tx

[@crystian7016]

@@CrazyCoupleDIY Thanks. I fixed it btw. It was a capacitor with bad solder, at the side of the usb conector.

[@ernestorivero9909]

Do you know of any esp32 board with that size that has normal bluetooth, because for me this bluetooth is easier to understand and less complicated than bluetooth BLE

[@michaelkeandremusic]

I have the same super mini but my blue light doesn’t flash when I plug it in. Only the red light

[@far-red]

thank you, i just got my supermini and did the exact same steps including inserting the LED into the pin, it works (alhamdullah)

[@skrasool5438]

Can we use 3.7v 200mah battery to this board

[@MonkeyNeuronActivation]

I did the same and received this error. A fatal error occurred: No serial data received. Failed uploading: uploading error: exit status 2

[@AbdulMajid-ek1ju]

Mine is getting very warn but tolerable to touch.if this keeps up, it will be soon be damaged.any one else having the issue? running wled on it.

[@muazmulla6504]

yah same thing happens to me

[@JazzU-o6s]

Can you do video on finding the mac address? Of all sketchs available, none show the Mac address.

[@techideas6876]

Can you show a bluetooth application with esp32c3

[@oliverstevens4689]

Can two of these be connected together via Bluetooth - one as master and one as slave? So a button press on one causes an LED or suchlike to be lit on the second one?

[@goku445]

Looks like this board has no antenna

[@hasansawan4970]

Look for something called ESP-NOW, it does exactly that.

[@hasansawan4970]

@@goku445 yes it have a tiny SMD antena , it work for a range of 20m , so good enough.

[@goku445]

@@hasansawan4970 yes, I bought 3 and the range is quite impressive for an antenna this small.

[@mahbubhasanapu5184]

can it connect to INMP441 Microphone

[@vlatkomacak89]

How to do hard reset?

[@ernestorivero9909]

This board has normal bluetooth or BLE only

[@DonatoGreco]

@3:34 you forgot to connect Vcc to the ESP32-C3 board. On the demonstration @4:00 it works due to USB powering the board

[@NETBotic]

Why they even bother with the battery is beyond me.

[@ernestorivero9909]

Esta placa tiene bluetooth normal o solo BLE

[@future_is_better]

how much pwm pin it have

[@faridaeasminassistantteach8302]

Love from Bangladesh ❤

[@YellowPurple]

Thank you so much for your comment! Stay tuned for more exciting upcoming videos.

[@boo9523]

Is there a platformIO board file available for these?

[@comic-typ5919]

just take the most generic C3 board

[@mahidul956]

Vhai Bangladeshi😳,mashallah

[@blynkhdi]

aplication for motor micro servo

[@smoochies5056]

Have bluetooth?

[@Paterbag]

Yes

[@Mmasters-lc8bf]

Can you please share the code because it doesn't pair's with my mobile when I upload a Bluetooth code into it

[@ericquagliozzi]

Same issue. BLE not usable in Bluetooth devices list, recognized but not pairing. Using SmartThings app doesn't give any help.

[@goku445]

no antenna

[@Mmasters-lc8bf]

Bro is this support's Bluetooth??

[@mr.anonymous298]

Yes, BLE supports

[@CrazyCoupleDIY]

Nice an easy tutorial bro

[@mdmosarafHosani-ui3qq]

Nice

[@YellowPurple]

Thanks

[@ThisumAthukorala]

​​ @YellowPurple ​ Where can i find the drivers for this

[@beastgamerz3696]

pls be vegan animals also have lifes

[@Paul_Poanie]

Hiiilfe Lieber Gott ich kann nicht sprechen, bitte gib mir eine Stimme

[@bagoftech]

works fine ... tks