Getting Started With RS232 to Ethernet Conversion / USR-TCP232-306

This video will describe how to get streaming RS232 data onto a LAN and accessed using Telnet. Configuration of the RS232 to Ethernet converter box will be covered.
RS232 to Ethernet Converter:
www.amazon.ca/PUSR-USR-TCP232...
Scamp3:
www.tindie.com/products/johnc...
udamonic.com/what-is-a-scamp....

[@biotechfordummies6591]

This has been a very useful device by working as a TCP server for serial rs232/485 and modbus!

[@romancharak3675]

What a neat solution.

[@webmasterg3526]

Always interesting - Thank you.

[@0033mer]

Welcome!

[@AVstudio777]

Good afternoon. This device's RS-232 port has the following option for connecting signals on the port contacts - a three-wire connection without flow control and power supply to the instrument interface - RX, TX, GND signals, power supply by DCD, DSR, CTS signals???

[@JohnMacLeod-fd8im]

using this convertor- 1st device is ethernet- take to USR unit- then to RS485 wiring to another RS485 connected to another USR unit far away , then back to ethernet connection to allow comm. between the two devices ? thanks John

[@OlangeGuerson-ys7yb]

Where I can get the Driver for the device?

[@NzelumChukwuebuka]

How can these data be sent via mqtt?

[@redguy3826]

Ethernet port support 100mbps ? My new switch only support 100/1000/2500

[@0033mer]

Supports 10/100 Mbps

[@redguy3826]

Thank you@@0033mer

[@sjesudasssdass7131]

Price

[@janakaangampitiya2182]

web browser user name password?

[@0033mer]

At 5:11 admin admin

[@albertogregory9678]

sorry, why on earth would anyone ever need this??

[@PodeCoet]

There are quite a few applications, secure long range sensor telemetry is a very common use case

[@yannkitson116]

If you like me have a charge controller for a "solar system" that sends all its data to a server in China. That means that the data then have to be typed in to Excel in order to do any long term analysis of the system's performance because the Chenese server only keeps one month worth of data. However, if I can intercept the datastream I can store it using IoTstack but I can also use mqtt to control the various functions of the charge controller. 😁

[@screwback72]

I used them to connect older cash registers to CCTV cameras so it would print the items scanned/price etc on the recorded footage. brilliant wee bit of kit