Getting the PERFECT Fitment with 33's!! *ANY RUBBING??*

Finally installing the new wheels and tires on my 3rd generation Toyota Tacoma!! . Today the RTX wheels finally go on the truck! It's been sitting in the drive way for the better part of the week and today it gets to drive some! The wheels are 17x9 with a 0 offset wrapped in a 33x11.5 tire. I could have gone a little wider, but I did save some weight with these tires and still have no rubbing. I think this is a good setup for now and can't wait to see if I get some better mpg as well, not that it's important but just something else to see! Stay tuned for more projects coming!
www.rtxwheels.com - bit.ly/RTXBROSF...
Our Equipment:
- Sony Alpha a5100: amzn.to/2Pt5pCS
- GoPro Hero 8: amzn.to/2Qvg5Q2
- GoPro Hero 7: amzn.to/2NHSyKz
- DJI Mavic Pro: amzn.to/2HPjG6H
- Apple Imac 21in: amzn.to/2NIssa6
Music By: www.epidemicsound.com
#toyotatacoma #rtxwheels #3rdgentacoma #howto #wheelinstallation #nittotires

[@skinnyboy4707]

Did he say why he didn’t drive to the tire shop with stock wheels and have them dismount and mount the new ones?

[@BrosFOURRSpeed]

When I sold my previous wheels and tires, I had the truck on blocks because my wheels had not arrived yet which is why I had to borrow my dad's 4runner. I sold the stock setup along time ago!

[@jonbakerocbpro8802]

What’s the wrap on the rear end? I have some nasty scratches on my bed from off-roading I want to cover up.

[@BrosFOURRSpeed]

The first link is this wrap! Second link is what I currently have! It's not too hard, just time consuming! kzbin.info/www/bejne/kHecant6dpx7iaM kzbin.info/www/bejne/Y2a6g5aNh7aEobc

[@mariosciore3527]

hi when putting bigger tires do you have to do anything to the computer I have a 2021 Tacoma TDR off road wanted to go 1-2 sizes bigger

[@BrosFOURRSpeed]

Nope! The only thing I would mention is the speedometer recalibration, but even with the 34's I'm running now, I'm off by like 4 mph, but it's not worth the $400 to me to buy that and change it. Other than that, you'll be fine with slightly larger tires!

[@rustytime]

Looks sharp as they get to me. You guys definitely have and have had some really nice vehicles.

[@grinch5071]

The thing on the Semi is a Gas Compressor skid. Looks brand new so its probably headed to a pipeline compression station.

[@lordestrella231]

I recently got a 265/70/17 nitto and I been experiencing some rubbing once i hit bumps while i turn plus I do want my mud flaps on do you think 265/65/17 will help me out at all? I also do mot have a lift on my truck wanna stay stock as possible

[@BrosFOURRSpeed]

That should be very similar to the stock tire size so not sure why there would be rubbing, but mud flaps usually get in the way so if you are rubbing now, you'll rub more with those on!

[@Popwarner-x1w]

How about rear end and front end gear ratio change.

[@BrosFOURRSpeed]

You don't have to regear with larger tires. It's not necessary, however, I did for the constant shifting and went with 5.29's for the 34's I'm currently running. kzbin.info/www/bejne/mJWTkqStd5eBodE kzbin.info/www/bejne/iXvQaGavhN-Wla8

[@juandulcey9094]

Wuaoooo super nice bro! I have the same truck as you, I want to upgrade my tires, I have a 17” TRD wheels, do you think 285/70r17 tires will fit on my truck with no rubbing? Also I have your same suspension

[@BrosFOURRSpeed]

I have 285/75/17 so those specs should be very similar to mine. I barely had any rubbing, maybe slightly in reverse on non level pavement, and some rubbing offroad, but not enough to trim anything. I've added spacers since then and did the CMC and pushed in the fender liners. You should be good with that set up!

[@midnighttacomaman1088]

I know it’s two years since. But can you tell me On this set up what offset exactly are Those rims?

[@BrosFOURRSpeed]

Those wheels had a +10 offset! So it was a 285/70/17 with the 17x9 +10! It was a good setup for a smaller tire!

[@2291adrian]

So much better than the last setup. Glad to see you stuck with the Ridge Grapplers!

[@dreww2475]

Ridge Grapplers were my choice had I bit the bullet and gone 285s instead of 255s.

[@austinwantstoplay]

I was trying to figure out why you're truck looks familiar I've seen it while I was at work in Charlotte!! Keep up the vids man I just bought a 2019 Tacoma

[@eddoberstein2956]

What lift fo you have on your truck?

[@JR-hr2xs]

17s 👍🏼👍🏼

[@bjdulay587]

Is 285/75r16 going to fit with a leveling kit and a 1.50 wheel spacers? 3rd gen taco?

[@BrosFOURRSpeed]

You will have to trim with the wheel spacer. Currently I am running 285/70/17 with a 1.25'' spacer and I had to do the CMC for them to fit, you would be good without the spacer though.

[@K1ngDre-DMZ]

Which rtx wheels are those? Your link no longer works

[@BrosFOURRSpeed]

Not sure why that link doesn't work, but here they are! rtxwheels.com/products/rtx-offroad-baja-satin-black-with-milled-rivets?_pos=7&_sid=5b7212137&_ss=r&variant=39277176422453

[@silverrockstar100]

Where can I purchase new tpms sensors and how could you tell which ones are compatible?

[@BrosFOURRSpeed]

Your local tire shop should carry those and usually most are universal so you can really use any type.

[@josegonzalescastillo5776]

My wheels are 17*9 can I put 285/70/17 tires with out lifting my truck?

[@BrosFOURRSpeed]

You will have rubbing, but if you cut/trim enough they will work! You will most likely have to do the cmc!

[@p-51mustang51]

Help! Just got some brand new nitto ridge grapplers installed on my Tacoma yesterday. They look great, but they rub on my mudflaps pretty badly when turning in reverse or just slightly tapping the brake while turning. It’s a pretty big area they’re rubbing on. Is there a fix for this? I’d like to keep the OEM flaps because of the classic Toyota look and protection of my paint but I noticed you didn’t have yours on. Do you notice much paint chipping? Thanks so much!!!!

[@BrosFOURRSpeed]

I've never had any paint chips even from the 34's I'm running now! This truck never had mud flaps on it! I've put 45k miles on this truck and never experienced a paint chip from the tires! Two things you can do! First is trimming! If you can even heat up the mud flap and push the plastic away from the tire, might be able to get by with that! kzbin.info/www/bejne/p3a4kIpph6mEj5I If it's really rubbing a new alignment is the way to go! I don't have any rubbing with the 34's after that! kzbin.info/www/bejne/g3uuaZZmpad-htU

[@p-51mustang51]

You are the man!! 😎 Just took them off and seems to do fine lol. I just got an alignment yesterday when I got them installed lol! I’ll leave them off for a while and see how it goes! Thanks so much man, you’re the best!!!

[@BrosFOURRSpeed]

@@p-51mustang51 No problem! Now I do have the rock sliders which might help block anything from hitting the pint as well, so even if you have side steps that’ll help some too.

[@p-51mustang51]

@@BrosFOURRSpeed yep! I have side steps so that’ll be good! I want to do away with them and get sliders though lol. I have literally been watching your videos exclusively to do stuff. Like I installed the Hi-line front bumper based off your video! Next mod is the diff re gear if I can ever afford it lol! I appreciate everything man

[@jameshoward3071]

What lift did you use how many inches and how has it been has yheee been any problems with it

[@BrosFOURRSpeed]

It's an OME kit, and with 8k miles on the lift, I've had zero issues so far! 2nd link here is the height difference! kzbin.info/www/bejne/mWLGYaycopx6jrM. kzbin.info/www/bejne/amHWZ3Spo5qtmdU

[@raydelfa1125]

What tail lights do you have??

[@BrosFOURRSpeed]

I got these from Tacoma Beast!! I'm not sure if they still have this style, but they have a lot to choose from!

[@robrawlins4870]

Does your Tacoma have a lift other than stock ?

[@BrosFOURRSpeed]

Yes it's lifted! OME kit that added 4'' up front and 3'' in the rear! kzbin.info/www/bejne/mWLGYaycopx6jrM. kzbin.info/www/bejne/amHWZ3Spo5qtmdU

[@robrawlins4870]

@@BrosFOURRSpeed thank you.

[@JohnQuincy1776]

That tire size is perfect.

[@BrosFOURRSpeed]

I actually went up to 34x12.5! Now I have the perfect setup lol! kzbin.info/www/bejne/pYDNdKWFlql_eLc

[@JohnQuincy1776]

@@BrosFOURRSpeed I watched that, great video. It looks good but I still like the 285/70s. I am more mild, than wild. I have a 4Runner coming in. I am hoping to fit 275/70s on it to start.

[@je8889]

I purchased a 3" suspension lift for my 2021 Tacoma, includes aftermarket UCAs.. Any insights on if 285/70r17 will rub with a 17x9 (0 offset / 5 Backspacing)?? This video is very helpful, just not sure of exact wheel specs you have

[@BrosFOURRSpeed]

So my wheels are 17x9 0 offset with a 4.5'' backspace, I had 285/70/17's with no issues. I did do the CMC for some extra clearance behind the front tire though and recently went to 305/70/17 (34's). I also have aftermarket UCA's and tomorrows video is on a new alignment, definitely check that out because I don't have any rubbing with my 34's now!! With the right alignment, you may not even have to trim.

[@je8889]

@@BrosFOURRSpeed thank you so much! I may end up going with 275 / 70 /17 - would this almost guarantee no rubbing? The lift I settled for is ironman 4x4 foam suspension stage 2!

[@t_0mie492]

Are you running stock height?

[@BrosFOURRSpeed]

Nope! It’s lifted! kzbin.info/www/bejne/mWLGYaycopx6jrM

[@jameshoward3071]

What offset did you use on the wheels

[@BrosFOURRSpeed]

James Howard These are at 0.

[@stevetrevino5346]

Looking fresh !!!

[@BrosFOURRSpeed]

Thanks! Went up to a 34 since this lol!

[@stevetrevino5346]

Nice !!!

[@longevity7264]

What offset is your rims? What brand name are your tires? What brand name are your rims? I like to buy 4 for my 2020 tacoma.

[@BrosFOURRSpeed]

The wheels are from RTX, 17x9 with a 0 offset. The tires are Nitto Ridge Grapplers. It's a good setup with no rubbing!

[@longevity7264]

It's this wheels came in size 17X8 with the zero offset or 16X8 with zero offset?

[@BrosFOURRSpeed]

@@longevity7264 I'm not sure, I think they were only 17x9 in the size I got, check the website though!

[@steeltron4861]

I have a 2020 sr 4x4 4 door. What is the tallest and widest tire I can put on the 16 inch rims?

[@americansoldier7776]

Tires look great! Love the vinyl, but I hate the 2 stripes on the door. I think it takes away from the back vinyl

[@BrosFOURRSpeed]

I'll be changing that at some point, just haven't got to it yet lol

[@americansoldier7776]

Bros FOURR Speed looks great overall though! Love the color, I have the VooDoo Blue. Just bought it a month ago :)

[@anthonygiordano3991]

So, just to be sure I’m understanding you correctly. You’re saying if I get at least a 2” lift, with a 285/70/17 tire and 17x9 wheels with a 0 offset (backspacing between 4”-6”), I should NOT have to do any CMC or pinch weld mods? Maybe just minor trimming? I don’t off-road at all.

[@BrosFOURRSpeed]

My lift is about 3'', maybe a little higher and I had a 33x12.5 with a 19x9 +10 and didn't rub hardly at all, very minor rubbing even offroad, with my new set up there was zero offset, I had no rubbing until I added the spacers and did the cmc and pinch mod!

[@anthonygiordano3991]

Bros FOURR Speed - Which makes sense because by adding the spacers, it was similar to a more negative offset.. thus requiring you to now do the CMC and PW mods. So, what lift are you on? I was considering the Eibach pro truck lift, but I believe that’s only gonna get me 2-2.5” of lift.

[@thatbluetaco1875]

Where did you get your tpms sensors

[@BrosFOURRSpeed]

I think I either used the stock ones or the tire guys had them available I could buy

[@electraglideclyde]

Beautiful, any lift?

[@BrosFOURRSpeed]

Thanks! Yeah OME 4in lift

[@AldapesExpress]

What size lift do you have? Suspension lift?

[@BrosFOURRSpeed]

It's an OME suspension lift. I have about 3.5'' in the front and 3'' in the rear. Here's some measurements if you want to see it all! kzbin.info/www/bejne/amHWZ3Spo5qtmdU along with the install! kzbin.info/www/bejne/mWLGYaycopx6jrM

[@jedd1004]

Love the wheel/tire setup!!!

[@jedd1004]

How do you like the lights at night BTW?

[@dossfishing3821]

I just got a sr5 2020 Tacoma what’s the biggest tire you can fit on stock rim and without rubbing

[@BrosFOURRSpeed]

I'd say about a 31 would be max. Might hit off roading at hard angles tho. Can always do a leveling kit tho if it does. 1in strut spacer and 1in rear block. Like $300 and super easy to do

[@agustinherrera5600]

Real nice set up . Im thinking of getting that same size tire . You think 285/75 /17 will rub ? Is there a huge diff from 285/70/17 with -12 offset wheel

[@BrosFOURRSpeed]

I don't think there is a huge difference in those tires, but look up the brand you want to see the differences. -12 would definitely rub unless you had the cab chop. I'm at 0 offset, and they almost rub, if I had wider tires I would have needed the chop done.

[@blue39503]

I always tell my dog Fergie what I'm doing and how long I will be gone .

[@Lexusgx550]

I am Blue you better get him iPhone or iPad.

[@MrRonhdman]

Hello where did you get your grill? I have a 2018 sr5. Also. Can you recommend size of bigger tires for my 2018 sr5 I just recently bought. I’m looking for a better off road look with no rubbing and changing miles speedometer

[@BrosFOURRSpeed]

It's from BP fabricating! If you have a stock truck, try to stay within what the factory trie specs are, you can probably go a little taller and keep the stock width or do the opposite. Any larger both height and width is when you start to rub on stock height.

[@FranciscoGalicia]

can i put 285/70/17 with the original 17" wheels? thanks

[@BrosFOURRSpeed]

You should be able to! What's the width on the 17's? I believe they are 7'' wide, so you just have to make sure the tire can accommodate that width. For example, the tire may hold a 7-9.5'' wheel, so just double check!

[@jimh2061]

Very nice truck! You apparently have done your home work on the tires and lift. Whats the stock rim offset compared to what you have now. Do they make rims the will set the tire out even more? Like maybe another inch.

[@BrosFOURRSpeed]

I think they are around +25 I think. New ones stick out like an inch farther than stock. You can get way more aggressive offset if you'd like. Some big diesel trucks run -44 and the whole tires/wheel sticks out. All depends on the look you're going for.

[@CarlosGutierrez-ih4ni]

@@BrosFOURRSpeed did you had to lift it ?

[@nosotroslosmexicanos2178]

The truck looks awesome one quick question i have a 2018 4 runner stock tires are 265/70/17 i want to go up 285/70/17 should i need spacers ?

[@shuaichen8690]

Don’t use spacer.

[@nathanpatrick7094]

Like that look 33”x12.50 on Tacoma think of get one plus with 2 “ lift will be fine

[@donteandry5260]

I have a 2019 4x2 TRD Pro. I have no interest in going off road but want 20 x 10 with 33" and ideally dont want an additional lift. Is it possible? thanks

[@BrosFOURRSpeed]

I don't think that's possible on a stock truck without trimming a lot. The pro has a bit of a lift which might help, but going 10 wide with a 33, it would have to be a skinny tire I think to fit. Are you ok with doing the cab chop mount and some trimming?

[@jeangt9865]

No the thing about 33" is that you would definitely have to slightly trim the back flaps on the front wheel setup especially when you are trying to make a full uturn in or out. The 33" would definitely touch the back end on the front fender's, but it's definitely fine on the rear end as in the back wheels, the fenders are pretty much spaced out well on the rear end. As long as you don't mind trimming out a bit you are definitely good to go with a 33"" setup. If not, once againl this is my personal choice and opinion upto a 32" setup is much better and you really can't tell the difference at a glance between the 32 and 33. But take it out to a tire or rim shop you check it out there and see for yourself.

[@TheNiuhuskies09]

If you're going offroad you don't want 20's with a 33. Should never go over half rim compared to tire. 33's should be a 16 inch rim at most

[@anthonyfratta4881]

What are the wheel specs?

[@BrosFOURRSpeed]

These are 17x9 0 offset!

[@appleman812]

i'm having a hard time deciding between 2019 sport vs off road... i like the off road suspension and features a lot better but the sport hood and matching bumpers, fenders, front bumper looks so good...

[@BrosFOURRSpeed]

Sounds like you would prefer the sport. Honestly I wanted the offroad for the crawl control and I personally didn't like the hood scoop and I knew I was going to be changing the fenders at some point. All based on what you like and need, you can't go wrong with either!

[@bradleyjohnson3068]

I dont believe the Sport model comes with the locking rear differential if that's important to you off roading. If the taco is for on-road only, then get the sport model.

[@FUCCOD]

Those look nice, looking for some for my bone stock 17. Dont want to get a lift.....not yet at least. :D

[@racermike182]

Looks really good! Random question...what kind of dog is that? My neighbor's dog looks exactly the same and just curious.

[@BrosFOURRSpeed]

She's a labradoodle! and thanks!!

[@Ihaveadashcam]

Morimoto XB fog lights would look really good, match that black headlight look

[@BrosFOURRSpeed]

I actually have some already that I had to switch out, but will be putting them back on to match!

[@michaelmarcoux3157]

Hey man , what's the lifted height ? 2" 3" ?

[@BrosFOURRSpeed]

It's right around 3.5'' up front and 3'' in the rear! I made a video on that if you want to see more specs on that! kzbin.info/www/bejne/amHWZ3Spo5qtmdU

[@tylerbolton8695]

My hoa would be on my ass if I left my tacoma on Jack's lmao

[@BrosFOURRSpeed]

Lol, I had no choice but it was only a few days!

[@peteg7446]

Wow, looks way better than your other setup 🖒. I probably would have going with the 12.5 wide, but saving the extra weight is a plus 🖒.

[@BrosFOURRSpeed]

Thanks! And yea I miss the little bit wider tire, but maybe I'll find one that doesn't weight as much for the next set up!

[@p_chaney283]

What brand tire did you go with?

[@BrosFOURRSpeed]

These are the Nitto Ridge Grapplers! I've had a few sets since then and I love them!!

[@p_chaney283]

Are they loud when driving down the road? I was going to go with the BF Goodrich but everyone complains about the loud noise when driving down the road.

[@BrosFOURRSpeed]

@@p_chaney283 These are quiet like stock! Very good on road tire and does great on the trails too!

[@LaoOregonOutdoors]

Need help, thinking about getting 285/75/16 and i have an 3/2 leveling kit install do you think it will rub?

[@BrosFOURRSpeed]

It shouldn't, I'm running 285/70/17 so those tires are going to be very similar size wise, I only have slight rubbing offroad.

[@raydelfa1125]

I'd like to get them.

[@BrosFOURRSpeed]

I got these from Tacoma Beast!! I'm not sure if they still have this style, but they have a lot to choose from!

[@noeruiz3244]

Where do you order you tires from? And wheels

[@BrosFOURRSpeed]

I got them from real truck.com and wheels are from RTX, that link is in the description!

[@mmunoz5875]

Larger tires is a must in order to get an aggressive look. Btw, you're still going to get some rubbing and you will definitely need a CMC. Also, you might get some rubbing when making sharp turns on the inside frame. I had that problem and bought some 1"1/2 spiders wheel spacers. Love the tires set up!👍

[@BrosFOURRSpeed]

I showed in the video that there isn't any rubbing, even at full crank which I didn't show. I won't need the cmc unless I do spacers or when I get more aggressive offset. Offroad there will be slight rubbing, but daily driving I don't have any rubbing issues.

[@mmunoz5875]

@@BrosFOURRSpeed sounds good and hopefully not 👍

[@modXELA]

Nice video, thanks. Would it rub with a 1.5" spacer? I'm thinking of installing the same setup.

[@BrosFOURRSpeed]

It will! I installed 1.25'' spacers and went ahead and did the cmc also after installing them! kzbin.info/www/bejne/o5rOYYSHl8p1pq8 CMC: kzbin.info/www/bejne/p3a4kIpph6mEj5I

[@modXELA]

@@BrosFOURRSpeed Thanks bro!

[@BrosFOURRSpeed]

No problem! (on a side note, just installed larger tires lol, that video will be coming soon!!)

[@modXELA]

@@BrosFOURRSpeed thanks, i'll keep an eye on it!

[@DavidRamirez-fe5dd]

That contraption on the massive tired truck was our government inflation machine, arriving in every state coming soon.

[@BrosFOURRSpeed]

I don't understand how a tire changing machine is a government inflation machine, can you explain that?

[@DavidRamirez-fe5dd]

@@BrosFOURRSpeed lmao. My bad. I was commenting on another video. My bad

[@ryan_rupe]

What lift would I need to fit these? My taco is stock right now

[@BrosFOURRSpeed]

I have an OME lift kit, gave me about 3.5'' up front and 3'' in the rear. A leveling kit might not be enough, but I'd say at least 2'' and depending on how much trimming you want to do as well.

[@tannerdunlap4306]

On stock wheels do you think a shit ton of trimming or even a cab mount chop would be needed? Plan on going 33s on stocks with a 2” leveling kit but not really sure. I really don’t want any rubbing lol

[@benroberts5756]

Looks great! Did you do the front diff bushing on your truck?

[@BrosFOURRSpeed]

No, I haven't had any issues with that. The only time I did was when I went to a 6'' lift on my 2nd gen tacoma.

[@baltazarbermudez4232]

I have a question, so I have a 3/2 leveling kit for my 2016 trd sport not installed yet. And I recently put on 265/70r17 on stock rims. If I install the lift do I need to get wheel spacers?

[@BrosFOURRSpeed]

You shouldn't have too. Unless you have some clearance issues between the tire and UCA, they aren't necessary.

[@pokeopening1113]

How many inches did you lift in your Toyota?

[@BrosFOURRSpeed]

It's about 4'' in the front total and 3.5'' in the rear!

[@karendixon401]

You could rent a U-Haul small white van for a day $20.. but good you can borrow 👍 Cool tires

[@abualwalid9999]

👍

[@inferno1770]

Looks great

[@BrosFOURRSpeed]

Thanks!

[@dixienormous49]

Where did you get your grille. I like it

[@BrosFOURRSpeed]

I got it from BP Fabricating! They have a good bit to choose from!

[@bwood9197]

how much is your truck lifted

[@BrosFOURRSpeed]

It was about a 4in lift

[@kaelillo]

Do you plan on doing forced induction to the Tacoma? It would be a good idea, especially with trying to push nearly 240 pounds of wheel and tire around.

[@BrosFOURRSpeed]

That's a lot of money for a pickup. I don't see a need to do that, it performs fine with the weight.

[@MsAce0424]

Did I miss the ET? WERE THOSE ET:0? Wondering because I want to chemfe my set up. I like this one. Looks great

[@BrosFOURRSpeed]

What do you mean by ET? Here's the specs if this helps....Wheels are 17x9 with a 0 offset and I was running a 285/70/17...I now have 305/70/17 which still fit great!

[@MsAce0424]

@@BrosFOURRSpeed ET is another way of saying offset. When we order them at my shop, they just show ET. Instead of saying offset. Sent it out to you by habit. Much appreciated. Thank you

[@tylerbrayden8747]

Does anyone know if I run the same 33 in tire set up with a 2 in lift it would fit?

[@BrosFOURRSpeed]

There's a good chance they could fit, you might have some rubbing though to trim. I have a little bit of clearance with this lift, so if you are ok with trimming some they should fit.

[@brianparris7020]

Hmmm what’s bout 285/75r16?

[@BrosFOURRSpeed]

Those should be very similar to the specs of these tires so that should be good!

[@brianparris7020]

@@BrosFOURRSpeed and with suspension lift or without ?

[@BrosFOURRSpeed]

@@brianparris7020 With a lift, unless you don't mind trimming a lot!

[@brianparris7020]

@@BrosFOURRSpeed hmm for my Tire size what inch should I get ? I am following you lol

[@jameshoward3071]

What was the exact size of your tires

[@lossantoscity3249]

Jump to 4:00 To get to the content! Thumbs this up for people to see. Thanks

[@shaiq-nbaiq1826]

Did you do a video on Recalibrating your Speedometer after installing your larger tires?

[@BrosFOURRSpeed]

I didn't, it's only off by about 2-3mph so I didn't see the need to do that. I plan on going to 35's next year, and I may have to do that then!

[@tjisitthatobvious304]

Wow your truck looks nice you should give it a high lift

[@stantate1747]

Are you going to recalibrate your speedo?

[@BrosFOURRSpeed]

I haven't done that, it's off by like 2 or 3 mph if that, if it was more than that I would.

[@jaredscott547]

I have -38mm offsets on SCS wheels and talk about rubbing....lol love the aggressive look tho

[@BrosFOURRSpeed]

Yea that's aggressive!!

[@Paradiddal]

Jared Scott stock ride height?

[@akabigchungus1436]

Lol who doesn't try to race tacomas once I installed my MF exhaust everyone tries to

[@BrosFOURRSpeed]

I don't race my tacoma at all lol, it's a truck..that's why I have my R8 to go fast! But if you want to, go for it!

[@enginelife8449]

Whats the lift on the truck

[@BrosFOURRSpeed]

It's the OME kit! Roughly 4'' up front and 3'' in the rear! kzbin.info/www/bejne/mWLGYaycopx6jrM kzbin.info/www/bejne/mpSwlWh4hLlkprM

[@dreww2475]

285s are the perfect size for a Tacoma. You'll probably still have rubbing on the cab but that's not the worst thing to be done. Definitely look better than 18" wheels, too. In terms of off roading you're probably better off with 16s (even more sidewall) but you get way more choices of tires, wheels in 17 luckily. Do 34s next, 285/75r17s. ;)

[@BrosFOURRSpeed]

andrew wat Actually no rubbing on the cab for daily driving! If I kept the 12.5 wide, I'd definitely have to to the cab mount chop. I thought about a taller tire so well see!

[@dreww2475]

@@BrosFOURRSpeed Daily drive doesn't have any flex though lol, off roading means your suspension articulates

[@johndenver5029]

What trails did u go on at uwharrie

[@BrosFOURRSpeed]

Can't remember the names. But here is a recent vid! kzbin.info/www/bejne/fXypnq2Fqpecrq8

[@dragonite986]

I just noticed there are two r's in fourr.

[@BrosFOURRSpeed]

Yup, we carried that over from our old channel name and already had the double R logo going.

[@Lexusgx550]

Any lift on your truck for 33 tires ?

[@BrosFOURRSpeed]

Yea I have about 4'' up front and 3.5'' in the rear.

[@Chann0097]

Hey bro’s for speed I need help I want to buy a gtr in the future but don’t know how much gas and service cost for a gtr I have a plan for the future on how I can get a GTR but I don’t know how much service and stuff will cost me! I’m 13 but I’d like to buy a GTR by time I’m 20-25 years old! I’m going to get a 350z when I get a job I’m going to try to get a older gtr like a 2013 or something but I would love to plan ahead and know prices so I’m sort of prepared!

[@spencerzebell104]

Are you running aftermarket uca’s? If so which do you recommend?

[@jameshoward3071]

What kind of lift did you use and have you had any problems with it

[@sanjuanpr25]

I have the Fuel Couplers 17x9 with a -12 offset, same Nitto Ridge Grapplers 285/70R17 I believe 6ply. The -12 offset make mine poke a tiny little bit more than yours. I think that size tire is the perfect tire for these Tacoma’s.

[@BrosFOURRSpeed]

Oh cool, I bet that's a nice setup!

[@evanselaban7058]

What is ur lift height?

[@BrosFOURRSpeed]

4in up front and 3in in the back. It's technically a 3in lift, but those are the overall measurements compared to stock!

[@alteradojo]

What is the offset bro looks nice

[@BrosFOURRSpeed]

0. Thanks! I might go to a -10 at some point

[@TomCalilaphitherepeople]

Replace the bumper.

[@BrosFOURRSpeed]

That'll come!

[@paulbrownwhpd]

Did you have to use a lift to get those tires to clear? My TRD Off Road is supposed to be here the end of the month and I’m changing tires and wheels before I pick it up.

[@BrosFOURRSpeed]

Yeah! You need at least a leveling kit to clear up front. Depending on width, some trimming might be needed too! I’ve done the CMC, and a new alignment for more clearance.

[@johnmcguire857]

Is that stock suspension?

[@BrosFOURRSpeed]

Nope. Old man emu setup

[@DRUMZ4LIFE82]

Are those METHOD NV knockoffs or something??

[@BrosFOURRSpeed]

They are from RTX.

[@dopesquatch]

Stock suspension? Or wat lift?

[@BrosFOURRSpeed]

It's lifted! OME kit with about 4'' up front and 3.5'' in the rear. Here's the first install for that if you'd like to check it out! kzbin.info/www/bejne/mWLGYaycopx6jrM

[@zerokool-2058]

Any lift kit? Or no?

[@BrosFOURRSpeed]

Yup! Here is the install video! kzbin.info/www/bejne/mWLGYaycopx6jrM

[@herbertsungahid]

You need to regear the differential with that large ass tires or your rpm is screaming high.

[@BrosFOURRSpeed]

Actually I haven't had any issues with that, the regear will actually make the rpm go up to help make the gears a little longer too. At 70mph I'm around 1700, with a 5.29 at 70mph it'll be around 2200. I've researched into that so it might be something I do, but right now I don't see a need to.

[@markdavis9510]

Don't do oil changes every 10k miles. It's too much. Trust me. Half is ok.

[@BrosFOURRSpeed]

My dad has 100K miles on his 4 runner doing oil changes every 10K miles and it’s fine! Synthetic oil is designed to last that long with regular driving.

[@papabear007]

Do you have a lift or stock on your truck? I’m buying a 2020 TRD 4x4 today? I like the look

[@BrosFOURRSpeed]

It's an OME lift kit! Here's an install and height comparison video! kzbin.info/www/bejne/mWLGYaycopx6jrM kzbin.info/www/bejne/amHWZ3Spo5qtmdU

[@RedWingsninetyone]

I don't care what Toyota (or any manufacturer) claims, 10,000 miles is a ridiculous amount between oil changes. I use full synthetic and still have a hard time going past 5k.

[@BrosFOURRSpeed]

Yea I change it every 5k, but on my dad's 4runner he has gone every 10k and has 80k miles no issues.

[@RedWingsninetyone]

@@BrosFOURRSpeed I wouldn't expect to see issues that soon, especially with modern engines and oil, but it's still a risk.

[@juanamador3384]

Felt bad for Matty .. alone in a dark room so sad smh

[@ernestobarajas5450]

Yuo I need skid plate.. Trd amigo...